74HCT08D
東芝セミコンダクター・アンド・ストレージ
- Lifecycle
- Active
- Stock
- 6154 個数
- Package
- SOIC-14
- Series
- ロジック - ゲートおよびインバータ
74HCT08Dと74HCT240Dの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The 74HCT08D and 74HCT240D are not functionally interchangeable despite sharing the same 74HCT logic family and SO14 package. The 74HCT08D provides four 2-input AND gates with active-high push-pull outputs, whereas the 74HCT240D is an octal buffer/line driver with 3-state inverting outputs and dual active-low output enable pins. The differences in logic function, channel count, output type, and control interface make direct substitution impossible without redesigning the surrounding circuit.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT08D | 74HCT240D | Why it matters |
|---|---|---|---|
| Logic Function | Quad 2-input AND gate | Octal inverting buffer/line driver with 3-state outputs | The logic function determines the fundamental signal operation; these parts are not functionally interchangeable. |
| Number of Gates / Channels | 4 | 8 | Channel count affects how many independent signals can be processed per package. |
| Output Type | Push-pull (totem-pole) | 3-state (tri-state) | 3-state outputs allow bus sharing, while push-pull outputs cannot be tied together. |
| Inputs per Channel | 2 | 1 | AND gates require two inputs per channel, whereas buffers have a single input per channel. |
| Output Drive Current (IOH/IOL) | ±4 mA | ±6 mA | Drive current determines the ability to source or sink current for connected loads. |
| Propagation Delay (tPD) | Typ. 12 ns | Typ. 13 ns | Propagation delay affects maximum operating speed and timing margins in a circuit. |
| Package | SO14 (14-pin SOIC) | SO20 (20-pin SOIC) | Package footprint and pin count must match the PCB layout for physical compatibility. |
| Pin Count | 14 | 20 | Different pin counts mean the devices are not drop-in replacements on the same footprint. |
| Enable / Control Pins | None | Two active-low output enable pins (1OE, 2OE) | Enable pins control output activation and high-impedance state, which is essential for bus applications. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Both are HCT-family devices designed for 5 V TTL-compatible systems. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HCT08D | 74HCT240D |
|---|---|---|
| Supplier | - | Toshiba Semiconductor and Storage |
| Series | 74HCT | 74HCT |
| Part Status | Obsolete | Active |
| Logic Type | AND Gate | Buffer, Inverting |
| Number of Elements | - | 2 |
| Number of Bits per Element | - | 4 |
| Output Type | - | 3-State |
| Current - Output High Low | 4mA, 4mA | 6mA, 6mA |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Circuits | 4 | - |
| Number of Inputs | 2 | - |
| Current - Quiescent (Max) | 1 µA | - |
| Logic Level - Low | 0.8V | - |
| Logic Level - High | 2V | - |
| Max Propagation Delay @ V Max CL | 18ns @ 5.5V, 50pF | - |
The 74HCT08D contains four independent 2-input AND gates, providing a logic output based on the combination of two inputs. The 74HCT240D is an octal buffer/line driver with 3-state outputs, designed to drive bus lines or buffer memory address registers. The 74HCT240D also features inverting outputs, whereas the 74HCT08D provides non-inverted logic outputs.
No. The 74HCT08D is typically housed in a 14-pin SOIC package, while the 74HCT240D is housed in a 20-pin SOIC package. They have different pin counts, pin assignments, and functions, so they are not pin-to-pin compatible.
No. The 74HCT240D is specifically designed as a 3-state octal buffer/line driver with inverting outputs and high drive capability, suitable for bus interfacing. The 74HCT08D provides AND gate logic with standard push-pull outputs and does not have 3-state control, so it cannot perform the bus-driving and isolation functions of the 74HCT240D.
Both devices are HCT-type CMOS logic, typically specified with symmetrical output drive of ±4 mA at 5 V. However, the 74HCT240D is characterized for bus-driving applications and may have specified drive currents suitable for driving transmission lines, while the 74HCT08D is intended for general logic interfacing. Always verify the exact drive current from the manufacturer datasheet for the specific part number.
Yes. Both the 74HCT08D and 74HCT240D are HCT-family devices, operating from a 4.5 V to 5.5 V supply and featuring TTL-compatible input thresholds. They are designed for 5 V systems and can interface directly with TTL logic levels.
Propagation delay depends on the specific manufacturer and test conditions. In general, both HCT devices have similar propagation delays in the range of a few nanoseconds to low tens of nanoseconds at 5 V. For precise timing, consult the respective manufacturer datasheets, as the 74HCT240D may have slightly different delay specifications due to its buffer/driver architecture.
No. The 74HCT240D is an inverting buffer/line driver, not an AND gate. It cannot perform logical AND operations. Additionally, its 3-state outputs require enable control, which is not present in the 74HCT08D. Using the 74HCT240D in place of an AND gate would require external logic and would not be a direct replacement.
The 74HCT08D is commonly used for general-purpose logic gating, signal combining, and control logic in digital systems. The 74HCT240D is typically used as a bus buffer, line driver, or memory address driver in microprocessor systems, where 3-state outputs and high drive strength are required.