74VHC245FT vs 74VHCT374AMTC

74VHC245FTと74VHCT374AMTCの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The 74VHC245FT and 74VHCT374AMTC are not functionally interchangeable. The 74VHC245FT is an octal bidirectional transceiver with 3-state outputs, while the 74VHCT374AMTC is an octal D-type flip-flop with 3-state outputs. They differ in logic function, control architecture, package type, and pinout, making direct substitution impossible without circuit redesign.

Different logic function Different control architecture Different package type Different pinout

Parts at a glance

Part A

74VHC245FT

東芝セミコンダクター・アンド・ストレージ

Lifecycle
Active
Stock
4188 個数
Package
TSSOP-20
Series
ロジック - バッファ、ドライバ、レシーバ、トランシーバ
Part B

74VHCT374AMTC

オンセミコンダクター社

Lifecycle
Active
Stock
6920 個数
Series
ロジック - フリップフロップ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 74VHC245FT 74VHCT374AMTC Why it matters
Logic Function Octal Bus Transceiver, 3-state Octal D-Type Flip-Flop, 3-state These are fundamentally different logic functions; a transceiver passes data bidirectionally while a flip-flop latches data on a clock edge, so they are not functionally interchangeable.
Logic Family VHC (Very High Speed CMOS) VHCT (VHC with TTL-compatible inputs) VHCT inputs are TTL-level compatible while VHC inputs are CMOS-level; this affects direct interfacing with 5 V TTL logic without level shifting.
Direction / Data Flow Bidirectional (A to B or B to A) Unidirectional (D to Q, clocked) Bidirectional capability versus clocked unidirectional storage determines whether the device can be used for bus steering or for registered data storage.
Clock Requirement None (combinational) Edge-triggered clock required A clocked device synchronizes data transfer to a clock edge, whereas a combinational transceiver responds immediately to inputs, changing timing behavior in a system.
Number of Channels 8 8 Both provide eight data paths, so channel count alone does not differentiate them, but the function of each channel differs.
Output Type 3-state 3-state Both support high-impedance output states for bus sharing, which is important for multiplexed bus architectures.
Supply Voltage Range 2.0 V to 5.5 V 4.5 V to 5.5 V The wider supply range of the VHC device allows operation at lower voltages, while the VHCT device is restricted to 5 V systems.
Propagation Delay (typical) ~3.5 ns at 5 V ~6.5 ns at 5 V (clock to Q) Different propagation delays affect timing margins and maximum operating frequency in synchronous designs.
Package TSSOP-20 TSSOP-20 Identical package and pin count simplify PCB footprint compatibility, though pin functions differ.
Input Compatibility CMOS-level inputs TTL-level compatible inputs TTL-compatible inputs allow direct connection to 5 V TTL outputs, while CMOS-level inputs may require level shifting in mixed-logic systems.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 74VHC245FT 74VHCT374AMTC
Supplier - Rochester Electronics, LLC,onsemi
Series 74VHC 74VHCT
Part Status Active Obsolete
Function - Standard
Type - D-Type
Output Type 3-State Tri-State, Non-Inverted
Number of Elements 1 1
Number of Bits per Element 8 8
Clock Frequency - 130 MHz
Max Propagation Delay @ V Max CL - 10.4ns @ 5V, 50pF
Trigger Type - Positive Edge
Current - Output High Low 8mA, 8mA 8mA, 8mA
Voltage - Supply 2V ~ 5.5V 4.5V ~ 5.5V
Current - Quiescent (Iq) - 4 µA
Input Capacitance - 4 pF
Operating Temperature -40°C ~ 125°C (TA) -40°C ~ 85°C (TA)
Mounting Type Surface Mount Surface Mount
Logic Type Transceiver, Non-Inverting -

Frequently asked questions

What are the primary functional differences between the 74VHC245FT and the 74VHCT374AMTC?

The 74VHC245FT is an octal bidirectional transceiver with 3-state outputs, designed for asynchronous two-way data transfer. The 74VHCT374AMTC is an octal D-type flip-flop with 3-state outputs, providing edge-triggered storage of data on the rising edge of the clock. The 74VHC245FT is a combinational bus interface device, while the 74VHCT374AMTC is a sequential logic register.

Are the 74VHC245FT and 74VHCT374AMTC pin-to-pin compatible?

No. The 74VHC245FT is typically supplied in a TSSOP-20 package, while the 74VHCT374AMTC is supplied in a TSSOP-20 package as well, but their pin functions differ. The 74VHC245FT has direction control (DIR) and output enable (OE) pins, whereas the 74VHCT374AMTC has clock (CP) and output enable (OE) pins. They are not direct drop-in replacements.

Can the 74VHC245FT and 74VHCT374AMTC operate at the same supply voltage?

Yes. Both devices are specified for operation over a 2.0 V to 5.5 V supply voltage range. However, the 74VHCT374AMTC is a VHCT-family device with TTL-compatible input thresholds, while the 74VHC245FT is a VHC-family device with CMOS-compatible input thresholds. This affects logic-level compatibility with upstream drivers.

What is the difference in input threshold levels between the 74VHC245FT and 74VHCT374AMTC?

The 74VHC245FT (VHC family) has CMOS input thresholds, typically 0.7 × VCC for a high input and 0.3 × VCC for a low input. The 74VHCT374AMTC (VHCT family) has TTL-compatible input thresholds, typically 2.0 V for a high input and 0.8 V for a low input, independent of VCC within the specified range. This makes the 74VHCT374AMTC suitable for interfacing with TTL logic levels.

Do both devices feature 3-state outputs?

Yes. The 74VHC245FT has 3-state outputs controlled by the OE pin, allowing the outputs to be placed in a high-impedance state for bus sharing. The 74VHCT374AMTC also has 3-state outputs controlled by the OE pin, enabling the register outputs to be disconnected from the bus.

Which device is better suited for bus-oriented data transmission?

The 74VHC245FT is specifically designed for bus-oriented bidirectional data transmission, with direction control and non-inverting 3-state outputs. The 74VHCT374AMTC is intended for registered data storage and is not a bidirectional transceiver. For pure bus transceiver applications, the 74VHC245FT is the appropriate choice.

What are the typical propagation delay characteristics of these devices?

The 74VHC245FT typically has a propagation delay (tPD) of approximately 3.5 ns at 5.0 V. The 74VHCT374AMTC typically has a propagation delay from clock to output (tPHL/tPLH) of approximately 5.0 ns at 5.0 V. Exact values depend on load conditions and supply voltage, and should be verified from the respective manufacturer datasheets.

Are the 74VHC245FT and 74VHCT374AMTC available in the same package type?

Both devices are commonly offered in TSSOP-20 packages. However, the 74VHC245FT may also be available in other packages such as SOIC-20 or DQFN, while the 74VHCT374AMTC is typically offered in TSSOP-20 and SOIC-20. Package availability should be confirmed with the specific manufacturer or distributor.