AD5262BRUZ20-RL7 vs AD5263BRU200

AD5262BRUZ20-RL7とAD5263BRU200の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD5262BRUZ20-RL7 and AD5263BRU200 are both quad-channel digital potentiometers from Analog Devices, but they differ in resolution, nominal resistance, and interface configuration. The AD5263BRU200 offers higher resolution and a different end-to-end resistance, making it a functional candidate only after validating the required wiper settings and digital interface timing for the target application.

Resolution Validation required
Nominal Resistance Not compatible
Channel Count High match
Digital Interface Validation required

Parts at a glance

Part A

AD5262BRUZ20-RL7

テキサス・インスツルメンツ

Lifecycle
Active
Stock
2539 個数
Package
TSSOP-16
Series
データ取得 - デジタルポテンショメータ
Part B

AD5263BRU200

テキサス・インスツルメンツ

Lifecycle
Active
Stock
2049 個数
Package
TSSOP-24
Series
データ取得 - デジタルポテンショメータ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD5262BRUZ20-RL7 AD5263BRU200 Why it matters
Number of Channels 2 4 Determines how many independent potentiometer channels are available in a single package, directly affecting circuit density and channel count requirements.
End-to-End Resistance 20 kΩ 200 kΩ Sets the nominal resistance range, which must match the impedance requirements of the surrounding signal chain for proper operation.
Resolution 8-bit (256 positions) 8-bit (256 positions) Defines the number of wiper tap positions and thus the adjustment granularity of the digital potentiometer.
Interface Type SPI I2C The digital control bus must be compatible with the host controller; SPI and I2C are not directly interchangeable without protocol changes.
Package / Case 16-TSSOP 16-TSSOP Physical footprint and pinout must match the PCB layout for a drop-in replacement.
Supply Voltage Range 4.5 V to 16.5 V (single) / ±2.25 V to ±8.25 V (dual) 4.5 V to 16.5 V (single) / ±2.25 V to ±8.25 V (dual) Operating voltage must be compatible with the system power rails to ensure correct biasing and signal swing.
Wiper Current ±1 mA (typical) ±1 mA (typical) Limits the current the wiper can source or sink, affecting the load the potentiometer can drive.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Ensures the device operates reliably within the intended environmental conditions of the application.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD5262BRUZ20-RL7 AD5263BRU200
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Taper Linear Linear
Configuration Potentiometer Potentiometer
Number of Circuits 2 4
Number of Taps 256 256
Resistance(Ohms) 20k 200k
Interface SPI I²C, SPI
Memory Type Volatile Volatile
Voltage - Supply 4.5V ~ 16.5V, ±5V 4.5V ~ 16.5V, ±4.5V ~ 7.5V
Features Cascade Pin Cascade Pin, Selectable Address
Tolerance ±30% ±30%
Temperature Coefficient(Typ) 35ppm/°C 30ppm/°C
Mounting Type Surface Mount Surface Mount
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C

Frequently asked questions

What are the key differences between the AD5262BRUZ20-RL7 and the AD5263BRU200?

The AD5262BRUZ20-RL7 is a dual-channel, 20 kΩ digital potentiometer with 256 positions, while the AD5263BRU200 is a quad-channel, 200 kΩ digital potentiometer with 256 positions. The AD5262 offers two independent channels in a 16-lead TSSOP package, whereas the AD5263 provides four independent channels in a 24-lead TSSOP package. Both are nonvolatile, I2C-compatible digital potentiometers from Analog Devices.

Are the AD5262BRUZ20-RL7 and AD5263BRU200 pin-compatible or package-compatible?

No. The AD5262BRUZ20-RL7 is supplied in a 16-lead TSSOP, and the AD5263BRU200 is supplied in a 24-lead TSSOP. They have different pin counts, pin functions, and PCB land patterns, so they are not drop-in replacements for each other.

Can the AD5262BRUZ20-RL7 and AD5263BRU200 be used in the same circuit design without modification?

No. Because they differ in channel count, end-to-end resistance, package size, and pinout, a circuit designed for one cannot directly accept the other without schematic and layout changes. The AD5262 provides two 20 kΩ channels, while the AD5263 provides four 200 kΩ channels, so the required resistor value and channel count must match the application.

What is the end-to-end resistance of each device?

The AD5262BRUZ20-RL7 has a 20 kΩ end-to-end resistance. The AD5263BRU200 has a 200 kΩ end-to-end resistance. These values are specified in the respective Analog Devices datasheets and determine the wiper resistance range and power dissipation in the target circuit.

How many channels does each digital potentiometer provide?

The AD5262BRUZ20-RL7 provides two independent digital potentiometer channels. The AD5263BRU200 provides four independent digital potentiometer channels. This difference affects the number of controllable resistance elements available in a design.

Do both devices use the same digital interface?

Yes. Both the AD5262 and AD5263 families use a 2-wire I2C-compatible serial interface for programming the wiper position. However, the command set and register map should be verified against the specific datasheet because the channel count differs.

What are the typical applications for the AD5262BRUZ20-RL7 versus the AD5263BRU200?

The AD5262BRUZ20-RL7 is typically used where two 20 kΩ digitally controlled resistance channels are needed, such as gain adjustment or offset trimming in dual-channel signal paths. The AD5263BRU200 is used where four 200 kΩ channels are required, such as multi-channel calibration or programmable resistance networks in industrial and instrumentation systems. Final selection depends on channel count, resistance value, and package size.

Are the AD5262BRUZ20-RL7 and AD5263BRU200 nonvolatile?

Yes. Both devices are nonvolatile digital potentiometers, meaning the wiper setting is retained after power is removed. This is a key feature of the AD5262 and AD5263 families from Analog Devices.