AD534JD vs AD534LD

AD534JDとAD534LDの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD534LD is a functionally compatible replacement candidate for the AD534JD, sharing the same analog multiplier/divider architecture, TO-100 package, and operating temperature range. The primary distinction is the specified nonlinearity grade, which requires validation against the target application's accuracy requirements before substitution.

Function Type High match
Package Type High match
Operating Temperature Range High match
Nonlinearity Grade Validation required

Parts at a glance

Part A

AD534JD

テキサス・インスツルメンツ

Lifecycle
Active
Stock
4704 個数
Package
CDIP-14
Series
リニアアンプ - アナログ乗算器、除算器
Part B

AD534LD

テキサス・インスツルメンツ

Lifecycle
Active
Stock
6492 個数
Package
CDIP-14
Series
リニアアンプ - アナログ乗算器、除算器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD534JD AD534LD Why it matters
Function Analog multiplier/divider Analog multiplier/divider Both parts must perform the same core arithmetic function to be considered substitutes.
Manufacturer Analog Devices Analog Devices Same manufacturer ensures consistent design lineage and documentation.
Package / Mounting Type 14-pin CERDIP, through-hole 14-pin CERDIP, through-hole Identical package and mounting allow direct board replacement without layout changes.
Operating Temperature Range 0°C to +70°C -55°C to +125°C The wider military-grade temperature range of the LD affects suitability for harsh or extended-temperature environments.
Grade / Temperature Class Commercial (J grade) Military/Industrial (L grade) Grade determines screening, reliability level, and acceptable application environments.
Total Error (Multiplier Mode) ±1.0% max ±1.0% max Accuracy specification directly affects computational precision in analog signal processing.
Supply Voltage Range ±8 V to ±18 V ±8 V to ±18 V Compatible supply range ensures the part can operate in the same circuit power environment.
Input Offset Voltage ±1.0 mV max ±1.0 mV max Offset voltage influences DC accuracy and error budget in precision analog computation.
Bandwidth (Small Signal) 1 MHz 1 MHz Bandwidth determines the maximum signal frequency the multiplier can process accurately.
Nonlinearity ±0.5% max ±0.5% max Nonlinearity affects distortion and accuracy across the full input range.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD534JD AD534LD
Supplier - Rochester Electronics, LLC,Analog Devices Inc.
Part Status Obsolete Active
Function Analog Multiplier/Divider Analog Multiplier/Divider
Number of Bits / Stages 4-Quadrant 4-Quadrant

Frequently asked questions

What are the primary differences between the AD534JD and AD534LD?

The AD534JD and AD534LD are both analog multipliers from Analog Devices, but they differ in their specified operating temperature ranges and corresponding accuracy grades. The AD534JD is specified for the commercial temperature range of 0°C to +70°C, while the AD534LD is specified for the industrial temperature range of -25°C to +85°C. The AD534LD also carries tighter accuracy specifications over its wider temperature range.

Are the AD534JD and AD534LD pin-compatible?

Yes. Both the AD534JD and AD534LD are offered in the same 14-pin hermetic side-brazed ceramic dual in-line package (DIP) with identical pinout assignments. This allows them to be used interchangeably on the same PCB footprint, provided the application's temperature and accuracy requirements are satisfied.

What is the total error specification for the AD534JD versus the AD534LD?

Per the Analog Devices AD534 datasheet, the AD534JD (J grade) is specified with a maximum total error of ±1.0% of full scale at +25°C, while the AD534LD (L grade) is specified with a maximum total error of ±0.5% of full scale at +25°C. The L grade offers approximately twice the accuracy of the J grade.

Can the AD534JD be used as a drop-in replacement for the AD534LD in an existing design?

Because both devices share the same package and pinout, the AD534JD can physically replace the AD534LD. However, the AD534JD has a narrower temperature range (0°C to +70°C) and looser accuracy (±1.0% vs. ±0.5%). If the application operates outside 0°C to +70°C or requires the tighter accuracy of the L grade, the substitution is not recommended without design validation.

What is the power supply requirement for the AD534JD and AD534LD?

Both the AD534JD and AD534LD operate from standard dual supplies of ±15 V nominal, with an allowable range of ±8 V to ±18 V per the Analog Devices datasheet. The quiescent supply current is typically 4 mA for both grades.

Do the AD534JD and AD534LD differ in their input offset voltage specifications?

Yes. The AD534LD (L grade) has a tighter maximum input offset voltage specification than the AD534JD (J grade). According to the AD534 datasheet, the L grade offers improved offset performance, which contributes to its lower total error specification of ±0.5% compared to ±1.0% for the J grade.

Which grade should be selected for an industrial application with ambient temperatures up to +85°C?

The AD534LD should be selected. Its specified operating temperature range of -25°C to +85°C covers the industrial requirement, whereas the AD534JD is only specified for 0°C to +70°C. Using the AD534JD above +70°C would exceed its rated temperature range and is not supported by the manufacturer's specifications.

Are the AD534JD and AD534LD RoHS compliant?

Both the AD534JD and AD534LD are housed in hermetic side-brazed ceramic DIP packages. These package types are typically not RoHS compliant due to the use of high-temperature solders and ceramic materials. Designers should verify the specific ordering code and compliance status with Analog Devices or an authorized distributor before finalizing a design.