AD7495BRZ vs AD7492BR-5

AD7495BRZとAD7492BR-5の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD7495BRZ and AD7492BR-5 are both 12-bit successive-approximation ADCs from Analog Devices sharing a compatible SOIC-24 footprint and parallel interface architecture, making the AD7495BRZ a viable functional replacement candidate for the AD7492BR-5 in many designs. However, the two parts differ in analog supply voltage range and achievable throughput, so the replacement should be validated against the target system's supply rail and sampling-rate requirements before adoption.

Resolution High match
Package Type High match
Supply Voltage Validation required
Throughput Rate Validation required

Parts at a glance

Part A

AD7495BRZ

テキサス・インスツルメンツ

Lifecycle
Active
Stock
2494 個数
Package
SOIC-8
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

AD7492BR-5

テキサス・インスツルメンツ

Lifecycle
Active
Stock
5435 個数
Package
SOIC-24
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7495BRZ AD7492BR-5 Why it matters
Resolution 12 bit 12 bit Both converters provide 12-bit resolution, so quantization accuracy is equivalent for signal-chain design.
Sampling Rate 1 MSPS 400 kSPS The AD7495 supports a much higher throughput, which matters for wideband or fast-settling acquisition systems.
Number of Input Channels 1 (single-ended) 1 (single-ended) Both are single-channel devices, so channel-count requirements are identical for either part.
Supply Voltage 5 V single supply 5 V single supply Identical supply requirements allow either part to be used in the same 5 V rail design.
Interface Type SPI / QSPI / MICROWIRE / DSP compatible serial Parallel (byte/word) The interface differs fundamentally: the AD7495 uses a serial bus while the AD7492 uses a parallel bus, affecting pinout, PCB routing, and host controller selection.
Package / Pin Count 8-lead SOIC 24-lead SOIC Different package sizes and pin counts mean the parts are not footprint-compatible and require different board layouts.
Power Consumption ~4.5 mW typical at 1 MSPS ~15 mW typical Lower power in the AD7495 benefits battery-powered and thermally constrained designs.
Integral Nonlinearity (INL) ±1 LSB max ±1 LSB max Equivalent INL specifications indicate comparable DC linearity performance for precision measurement applications.
Reference Type Internal reference Internal reference Both integrate an on-chip reference, simplifying system design and reducing external component count.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7495BRZ AD7492BR-5
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 1M 1.25M
Data Interface SPI, DSP Parallel
Number of A/D Converters 1 1
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Number of Inputs 1 -
Input Type Single Ended -
Configuration S/H-ADC -
Ratio - S / H: ADC 1:1 -
Architecture SAR -
Reference Type External -
Voltage - Supply, Analog 2.7V ~ 5.25V -
Voltage - Supply, Digital 2.7V ~ 5.25V -

Frequently asked questions

What are the key differences between the AD7495BRZ and AD7492BR-5?

The AD7495BRZ is a 12-bit successive-approximation ADC that operates from a single 2.7 V to 5.25 V supply and includes an on-chip reference, while the AD7492BR-5 is a 12-bit SAR ADC specified for a 5 V supply that requires an external reference. Both are offered in 24-lead SOIC packages, but their reference architecture and supply requirements differ.

Do the AD7495BRZ and AD7492BR-5 have the same resolution and throughput?

Yes. Both devices are 12-bit successive-approximation ADCs with a maximum throughput rate of 1 MSPS, making them comparable in resolution and conversion speed.

Can the AD7495BRZ and AD7492BR-5 be used interchangeably in an existing design?

Not without validation. The AD7495BRZ integrates an internal reference and supports a 2.7 V to 5.25 V supply range, whereas the AD7492BR-5 is a 5 V device requiring an external reference. Reference configuration, supply voltage, and associated external components must be verified against the datasheets before any substitution.

What supply voltage does each device require?

The AD7495BRZ operates from a single supply of 2.7 V to 5.25 V. The AD7492BR-5 is specified for operation from a 5 V supply.

How does the reference architecture differ between the two parts?

The AD7495BRZ includes an on-chip reference, reducing external component count. The AD7492BR-5 does not include an internal reference and requires an external reference voltage to be applied for conversion.

Are the AD7495BRZ and AD7492BR-5 available in the same package?

Both devices are offered in a 24-lead SOIC package, which supports similar PCB footprint considerations, though pin functions and external connections should be confirmed from the respective datasheets.

What interface do the AD7495BRZ and AD7492BR-5 use for data output?

Both ADCs provide a serial digital interface for connection to microcontrollers and DSPs, supporting straightforward integration into embedded data-acquisition systems.