AD7654ASTZ
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 2675 個数
- Package
- LQFP-48
- Series
- データ取得 - アナログ/デジタルコンバータ (ADC)
AD7654ASTZとAD7651ASTZRLの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The AD7654ASTZ and AD7651ASTZRL are both 16-bit successive-approximation ADCs from Analog Devices in the same 48-lead LQFP package, but they are not drop-in replacements. The AD7654ASTZ provides four analog input channels with simultaneous sampling, while the AD7651ASTZRL offers a single-channel configuration, so channel count and input architecture differ fundamentally. Their throughput rates, interface timing, and external component requirements also diverge, meaning a direct board-level substitution is not possible without redesign.
テキサス・インスツルメンツ
テキサス・インスツルメンツ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7654ASTZ | AD7651ASTZRL | Why it matters |
|---|---|---|---|
| Number of ADC Channels | 2 (simultaneous sampling) | 1 | Determines how many analog signals can be digitized; the AD7654 supports two simultaneous channels while the AD7651 supports only one, affecting multi-signal acquisition designs. |
| Sampling Rate | 500 kSPS | 100 kSPS | Maximum throughput directly limits the bandwidth of signals that can be captured; the AD7654 is five times faster than the AD7651. |
| Resolution | 16 bits | 16 bits | Both provide 16-bit resolution, so dynamic range and quantization noise performance are comparable for a given input range. |
| Input Configuration | Pseudo-differential (2 channels) | Single-ended | Input topology affects common-mode rejection and wiring; pseudo-differential inputs reject ground noise better than single-ended inputs. |
| Interface Type | Parallel and Serial (SPI/QSPI/MICROWIRE/DSP) | Serial (SPI/QSPI/MICROWIRE/DSP) | The AD7654 offers both parallel and serial interfaces, allowing use with parallel-bus microcontrollers, while the AD7651 is serial-only. |
| Package / Pin Count | 48-lead LQFP | 48-lead LQFP | Package and pin count affect PCB footprint and layout; both use the same 48-lead LQFP, but pinouts differ due to interface differences. |
| Supply Voltage (Analog) | 5 V | 5 V | Analog supply defines the input voltage range and must match the system's analog front-end; both operate from a 5 V analog supply. |
| Power Consumption | Higher (dual-channel, 500 kSPS) | Lower (single-channel, 100 kSPS) | Power budget is critical in portable and dense systems; the faster dual-channel AD7654 consumes more power than the single-channel AD7651. |
| Internal Reference | Yes (2.5 V on-chip reference) | Yes (2.5 V on-chip reference) | An internal reference simplifies design by removing an external reference component; both devices include a 2.5 V reference. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7654ASTZ | AD7651ASTZRL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Series | PulSAR® | PulSAR® |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 500k | 100k |
| Number of Inputs | 2, 4 | 1 |
| Input Type | Pseudo-Differential, Single Ended | Pseudo-Differential |
| Data Interface | SPI, Parallel, DSP | SPI, Parallel, DSP |
| Configuration | MUX-S/H-MUX-ADC | S/H-ADC |
| Ratio - S / H: ADC | 2:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Features | Simultaneous Sampling | - |
The AD7654ASTZ is a dual-channel, 16-bit, 500 kSPS successive-approximation ADC, while the AD7651ASTZRL is a single-channel, 16-bit, 100 kSPS SAR ADC. The AD7654 provides two simultaneous-sampling inputs in a 48-lead LQFP, whereas the AD7651 offers one input in a 48-lead LQFP and is supplied in tape-and-reel form (RL suffix).
No. Although both devices are offered in a 48-lead LQFP package, their pin functions differ because the AD7654 is a dual-channel converter and the AD7651 is a single-channel converter. The pinouts are not interchangeable, so PCB layouts must be designed for the specific part.
Both parts provide 16-bit resolution. The AD7654ASTZ offers a maximum throughput of 500 kSPS, while the AD7651ASTZRL offers a maximum throughput of 100 kSPS. The higher throughput of the AD7654 suits faster acquisition requirements, while the AD7651 targets lower-speed, lower-power applications.
The AD7654ASTZ has two independent analog input channels that can be sampled simultaneously, making it suitable for applications requiring phase-coherent measurement of two signals. The AD7651ASTZRL has a single analog input channel, so it can only convert one signal at a time.
Both devices operate from a 5 V analog supply and a 2.7 V to 5.25 V digital supply, and both provide a parallel digital interface for connection to a host processor or DSP. Designers should confirm the exact supply and interface timing requirements in the respective manufacturer datasheets before finalizing a design.
The RL suffix denotes tape-and-reel packaging, which is intended for automated pick-and-place assembly in volume production. The AD7654ASTZ is supplied in standard tray or tube packaging. The electrical specifications of the AD7651ASTZRL are the same as the non-reel version of the AD7651ASTZ.
No. The two devices differ in channel count, throughput, pinout, and package quantity, so they are not drop-in replacements. A redesign of the analog front end, PCB layout, and firmware timing would be required to substitute one for the other, and all differences must be validated against the manufacturer datasheets.