AD7718BRUZ vs AD7714ARS-5

AD7718BRUZとAD7714ARS-5の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD7718BRUZ and AD7714ARS-5 are both 24-bit sigma-delta ADCs from Analog Devices sharing a comparable signal chain architecture, but they differ in channel count, package footprint, and supply configuration. The AD7714ARS-5 can serve as a functional substitute for the AD7718BRUZ only where the reduced channel count and SSOP-28 footprint are acceptable; a full pin-for-pin drop-in replacement is not possible without layout and firmware validation.

Resolution and ADC Architecture Validation required
Channel Count Not compatible
Package Type Not compatible
Supply Voltage Range Validation required

Parts at a glance

Part A

AD7718BRUZ

テキサス・インスツルメンツ

Lifecycle
Active
Stock
5458 個数
Package
TSSOP-28
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

AD7714ARS-5

テキサス・インスツルメンツ

Lifecycle
Active
Stock
4752 個数
Package
SSOP-28
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7718BRUZ AD7714ARS-5 Why it matters
Resolution (bits) 24 24 Both are 24-bit sigma-delta ADCs, so resolution alone does not distinguish them for substitutability.
Number of input channels 8 (4 differential / 8 single-ended) 5 (3 differential / 5 single-ended) Channel count determines how many sensors can be multiplexed; the AD7718 offers more inputs, which affects system architecture.
Package 28-lead TSSOP 24-lead SSOP Different package footprints and pin counts prevent direct drop-in replacement on an existing PCB.
Supply voltage (analog) 2.7 V to 5.25 V 5 V (4.75 V to 5.25 V) The AD7718 supports lower supply voltages, enabling 3 V systems, while the AD7714-5 is a 5 V-only device.
Interface SPI / QSPI / MICROWIRE / DSP compatible serial SPI / QSPI / MICROWIRE / DSP compatible serial Both use a similar serial interface, so firmware-level compatibility is generally maintained.
PGA gain range 1 to 128 1 to 128 Identical programmable gain ranges allow similar handling of low-level sensor signals.
Output data rate (max) Up to 1.365 kSPS Up to 1 kSPS Slightly higher throughput on the AD7718 may matter for faster-sampling applications.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Identical industrial temperature ranges mean both suit the same environmental conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7718BRUZ AD7714ARS-5
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 24 24
Sampling Rate(Per Second) 1.37k 1k
Number of Inputs 4/5, 8/10 3, 5
Input Type Differential, Pseudo-Differential Differential, Pseudo-Differential
Data Interface SPI, DSP SPI, DSP
Configuration MUX-PGA-ADC MUX-PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 3V ~ 5.25V
Features PGA PGA
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the primary functional differences between the AD7718BRUZ and the AD7714ARS-5?

The AD7718BRUZ is a 24-bit, 8-channel (4 differential) sigma-delta ADC with an on-chip PGA and programmable filter, housed in a 28-lead TSSOP. The AD7714ARS-5 is a 24-bit, 5-channel (3 differential) sigma-delta ADC with an on-chip PGA, housed in a 24-lead SSOP and specified for 5 V operation. The AD7718 offers more input channels and a different package, while the AD7714 provides a smaller channel count in a narrower package.

Are the AD7718BRUZ and AD7714ARS-5 pin-compatible or package-compatible?

No. The AD7718BRUZ uses a 28-lead TSSOP package, while the AD7714ARS-5 uses a 24-lead SSOP package. The pin counts and package footprints differ, so they are not drop-in replacements and require different PCB land patterns.

Do both devices support the same supply voltage range?

No. The AD7714ARS-5 is specified for a 5 V analog supply (the "-5" suffix denotes 5 V operation). The AD7718BRUZ operates from a 2.7 V to 5.25 V analog supply (AVDD) and a 2.7 V to 5.25 V digital supply (DVDD), allowing lower-voltage operation that the AD7714ARS-5 does not support.

How do the input channel counts compare between the two ADCs?

The AD7718BRUZ provides 8 analog input channels configurable as 4 fully differential or 8 pseudo-differential inputs. The AD7714ARS-5 provides 5 analog input channels configurable as 3 fully differential or 5 pseudo-differential inputs. The AD7718 therefore offers more channels for multi-sensor designs.

Do both parts include an on-chip programmable gain amplifier (PGA) and digital filter?

Yes. Both the AD7718BRUZ and AD7714ARS-5 integrate a programmable gain amplifier and a sigma-delta modulator with on-chip digital filtering, allowing direct interfacing of low-level sensor signals and rejection of power-line frequencies without external signal conditioning.

What serial interface do the AD7718BRUZ and AD7714ARS-5 use?

Both devices provide a three-wire serial interface compatible with SPI, QSPI, MICROWIRE, and DSP interface standards, supporting daisy-chaining and readback of the internal registers for configuration and data retrieval.

Can the AD7714ARS-5 be used as a direct substitute for the AD7718BRUZ in an existing design?

No. Because the two devices differ in package (24-lead SSOP vs 28-lead TSSOP), channel count (5 vs 8), and supply voltage specification (5 V vs 2.7 V to 5.25 V), a direct substitution is not possible. Any replacement requires a PCB redesign and revalidation against the target system requirements.