AD8000YRDZ
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 6251 個数
- Package
- SOIC-8
- Series
- リニアアンプ - 計装用、オペアンプ、バッファアンプ
AD8000YRDZとAD8009ARZの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The AD8009ARZ and AD8000YRDZ are both high-speed current-feedback operational amplifiers from Analog Devices, but they are not identical drop-in substitutes. The AD8009ARZ offers higher slew rate and bandwidth in a standard SOIC-8 package, while the AD8000YRDZ provides lower input noise and a smaller LFCSP package. Designers should validate supply voltage headroom, thermal performance, and PCB footprint before substituting one for the other in a given application.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8009ARZ | AD8000YRDZ | Why it matters |
|---|---|---|---|
| -3 dB Bandwidth | 1 GHz (G = +2) | 1.5 GHz (G = +1) | Bandwidth determines the maximum signal frequency the amplifier can handle with acceptable gain, directly affecting high-speed signal fidelity. |
| Slew Rate | 5500 V/µs | 4100 V/µs | Slew rate limits how fast the output can respond to large signal swings; higher slew rate supports faster large-signal transitions. |
| Supply Voltage Range | ±5 V to ±6 V (dual) | ±4 V to ±6 V (dual) | The allowable supply range determines compatibility with the system power rails and headroom available for signal swing. |
| Quiescent Supply Current | 16 mA typical | 13.5 mA typical | Quiescent current affects power consumption and thermal budget, which is important in densely packed or power-sensitive designs. |
| Input Voltage Noise | 1.1 nV/√Hz | 1.6 nV/√Hz | Lower input voltage noise improves the signal-to-noise ratio in low-level signal amplification applications. |
| Package | 8-Lead SOIC | 8-Lead SOIC (with exposed pad) | Package type affects PCB footprint, thermal performance, and layout compatibility for drop-in substitution. |
| Output Current | 175 mA | 100 mA | Output drive current determines the ability to drive low-impedance loads such as cables or ADCs without distortion. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +125°C | The temperature range defines the environments in which the part can reliably operate, affecting suitability for industrial or automotive use. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8000YRDZ | AD8009ARZ |
|---|---|---|
| Part Status | Active | Active |
| Amplifier Type | Current Feedback | Current Feedback |
| Number of Circuits | 1 | 1 |
| Slew Rate | 4100V/µs | 5500V/µs |
| -3 dB Bandwidth | 1.58 GHz | 1 GHz |
| Current - Input Bias | 5 µA | 50 µA |
| Voltage - Input Offset | 1 mV | 2 mV |
| Supply Current | 13.5mA | 16mA |
| Current - Output / Channel | 100 mA | 175 mA |
| Voltage - Supply Span(Min) | 4.5 V | 5 V |
| Voltage - Supply Span(Max) | 12 V | 12 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8009ARZ is a current-feedback operational amplifier specified for a 5 V supply with a 1 GHz -3 dB bandwidth and 5,500 V/µs slew rate, supplied in an 8-lead SOIC package. The AD8000YRDZ is a voltage-feedback operational amplifier specified for ±5 V supplies with a 1.5 GHz -3 dB bandwidth and 4,100 V/µs slew rate, supplied in an 8-lead SOIC with exposed pad (SOIC-EP) package. They differ in amplifier topology, supply range, package thermal pad, and dynamic specifications.
No. The AD8009ARZ uses the standard 8-lead SOIC pinout, while the AD8000YRDZ uses an 8-lead SOIC with exposed pad (SOIC-EP) that requires a thermal pad land on the PCB. The exposed pad must be soldered to a copper area for rated thermal performance, so the two are not drop-in replacements on the same land pattern.
The AD8009ARZ is specified for operation on a single 5 V supply (with a specified dual-supply range as well). The AD8000YRDZ is specified for ±5 V dual supplies. Designs must confirm the supply configuration against the respective datasheet before substitution.
The AD8009ARZ provides a -3 dB bandwidth of 1 GHz and a slew rate of 5,500 V/µs. The AD8000YRDZ provides a -3 dB bandwidth of 1.5 GHz and a slew rate of 4,100 V/µs. The AD8000YRDZ offers higher small-signal bandwidth, while the AD8009ARZ offers a higher slew rate.
The AD8009ARZ is the current-feedback amplifier in this pair and is specified for current-feedback operation, making it the appropriate choice when the design requires current-feedback topology characteristics such as gain-independent bandwidth. The AD8000YRDZ is a voltage-feedback amplifier and is not a direct substitute in current-feedback circuits.
Yes. The AD8000YRDZ includes an exposed thermal pad (SOIC-EP) intended to be soldered to a PCB copper plane for improved heat dissipation. The AD8009ARZ uses a standard 8-lead SOIC without an exposed pad. Thermal design and PCB layout must account for this difference.
No. Direct replacement is not supported because the devices differ in amplifier topology (voltage-feedback versus current-feedback), supply specifications, package footprint (exposed pad versus standard SOIC), and dynamic performance. Any substitution requires full validation against the manufacturer datasheets and the target circuit requirements.