AD8226ARZ-R7 vs AD8223AR

AD8226ARZ-R7とAD8223ARの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8226ARZ-R7 and AD8223AR are both single-channel instrumentation amplifiers from Analog Devices in the same 8-lead SOIC package, making them a plausible functional replacement pairing. However, the AD8226ARZ-R7 offers a wider supply range, rail-to-rail output, and higher gain bandwidth, while the AD8223AR is a fixed-gain-option device with lower quiescent current. Designers should validate gain configuration, supply headroom, and bandwidth requirements before substituting.

Package Type High match
Supply Voltage Range Validation required
Gain Configuration Validation required
Bandwidth and Slew Rate Validation required

Parts at a glance

Part A

AD8226ARZ-R7

テキサス・インスツルメンツ

Lifecycle
Active
Stock
5908 個数
Package
SOIC-8
Series
リニアアンプ - 計装用、オペアンプ、バッファアンプ
Part B

AD8223AR

テキサス・インスツルメンツ

Lifecycle
Active
Stock
3886 個数
Package
SOIC-8
Series
リニアアンプ - 計装用、オペアンプ、バッファアンプ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8226ARZ-R7 AD8223AR Why it matters
Number of Amplifiers 1 1 Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent.
Supply Voltage Range 2.2 V to 36 V (±1.1 V to ±18 V) 3 V to 24 V (±1.5 V to ±12 V) The wider supply range of the AD8226 allows operation in higher-voltage systems where the AD8223 would be overstressed.
Gain Setting Resistor-programmable (G = 1 + 49.4k/RG) Fixed gain of 5 (internally set) The AD8226 offers flexible user-set gain, while the AD8223 is limited to a fixed gain of 5, restricting design flexibility.
Input Offset Voltage (max) ±200 µV (typical ±50 µV) ±250 µV Lower offset voltage improves DC accuracy in precision measurement applications.
Input Bias Current (max) ±27 nA ±25 nA Bias current affects error in high-impedance sensor interfaces; both are comparable but not identical.
Bandwidth (–3 dB, G = 5) 1.5 MHz 200 kHz The AD8226 supports much higher signal bandwidth, enabling faster dynamic measurements than the AD8223.
CMRR (min, G = 5) 80 dB 86 dB Higher common-mode rejection reduces errors from common-mode noise in noisy industrial environments.
Operating Temperature Range –40 °C to +125 °C –40 °C to +85 °C The extended temperature range of the AD8226 suits harsher environments where the AD8223 is not rated.
Package 8-Lead SOIC (R-8) 8-Lead SOIC (R-8) Identical package and pinout allow drop-in board-level substitution without layout changes.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8226ARZ-R7 AD8223AR
Supplier - Rochester Electronics, LLC,Analog Devices Inc.
Part Status Active Obsolete
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Output Type Rail-to-Rail Rail-to-Rail
Slew Rate 0.6V/µs 0.3V/µs
-3 dB Bandwidth 1.5 MHz 200 kHz
Current - Input Bias 20 nA 12 nA
Voltage - Input Offset 100 µV 250 µV
Supply Current 350µA 650µA
Voltage - Supply Span(Min) 2.2 V 3 V
Voltage - Supply Span(Max) 36 V 24 V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount
Current - Output / Channel 13 mA -

Frequently asked questions

What are the key differences between the AD8226ARZ-R7 and the AD8223AR?

The AD8226ARZ-R7 is an instrumentation amplifier with a rail-to-rail output, a gain range of 1 to 1000 set by a single external resistor, and a typical supply current of 350 µA. The AD8223AR is a lower-cost instrumentation amplifier with a fixed gain of 5 to 1000 set by a single external resistor, a rail-to-rail output, and a typical supply current of 400 µA. The AD8226 offers wider gain flexibility (gain of 1 achievable) and lower supply current, while the AD8223 is positioned for cost-sensitive fixed-gain applications.

Are the AD8226ARZ-R7 and AD8223AR pin-compatible?

Both devices are offered in an 8-lead SOIC package (R-8 suffix), and their pinouts follow the standard instrumentation amplifier configuration: pin 1 and pin 8 are gain-setting resistor terminals, pins 2 and 3 are inverting and non-inverting inputs, pin 4 is the negative supply, pin 5 is the reference, pin 6 is the output, and pin 7 is the positive supply. Designers should still verify the exact pinout against the respective manufacturer datasheets before substituting, as internal connections and reference pin behavior may differ.

Can the AD8223AR be used as a direct drop-in replacement for the AD8226ARZ-R7?

Not unconditionally. Although both are 8-lead SOIC instrumentation amplifiers with similar pin functions, the AD8226 supports a gain of 1 (no external resistor), whereas the AD8223 has a minimum gain of 5. Circuits designed for the AD8226 at low gains would not function correctly with the AD8223. Gain-setting resistor values, bandwidth, and supply current also differ, so the replacement must be validated against the AD8226 datasheet and the target design requirements.

What supply voltage ranges do the AD8226ARZ-R7 and AD8223AR support?

Both devices operate from dual supplies of ±2.3 V to ±18 V or single supplies of 4.6 V to 36 V, per their respective manufacturer datasheets. This wide supply range makes both suitable for battery-powered and industrial signal-conditioning applications.

How is gain set on the AD8226ARZ-R7 versus the AD8223AR?

On both devices, gain is programmed with a single external resistor connected between the gain-setting pins (pins 1 and 8). For the AD8226, gain is set by the equation G = 1 + 49.4 kΩ/RG, allowing gains from 1 to 1000. For the AD8223, gain is set by G = 5 + 200 kΩ/RG, giving a minimum gain of 5 and a maximum of 1000. The different internal resistor values mean the same RG produces different gains on the two parts.

How do the bandwidth and noise specifications compare between the AD8226ARZ-R7 and AD8223AR?

The AD8226ARZ-R7 provides a bandwidth of 1.5 MHz at G = 1 and 150 kHz at G = 100, with an input voltage noise of 22 nV/√Hz at 1 kHz. The AD8223AR provides a bandwidth of 300 kHz at G = 5 and 30 kHz at G = 100, with an input voltage noise of 27 nV/√Hz at 1 kHz. The AD8226 therefore offers higher bandwidth and slightly lower input noise, which matters in higher-frequency or low-level signal applications.

What are the typical supply currents of the AD8226ARZ-R7 and AD8223AR?

The AD8226ARZ-R7 typically draws 350 µA of supply current, while the AD8223AR typically draws 400 µA, per the manufacturer datasheets. Both are low-power instrumentation amplifiers suitable for portable and battery-operated instrumentation.

Which part is better suited for low-gain signal conditioning?

The AD8226ARZ-R7 is better suited for low-gain signal conditioning because it supports a gain of 1 (unity gain) with no external resistor, whereas the AD8223AR has a minimum gain of 5. For applications requiring buffering or gains below 5, the AD8226 is the appropriate choice; the AD8223 is intended for fixed-gain configurations of 5 or higher.