Part A
AD8307ARZ-RL7
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 2524 個数
- Package
- SOIC-8
- Series
- リニアアンプ - 特殊用途
Replacement verdict
Not a drop-in replacement
The AD8307ARZ-RL7 and AD8300AR are fundamentally different devices: the AD8307ARZ-RL7 is a logarithmic RF detector amplifier, while the AD8300AR is a 12-bit digital-to-analog converter. They serve distinct signal-chain functions and cannot be substituted for one another in a design.
Different device function
Different signal path role
Different output type
Different package and pinout
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8307ARZ-RL7 | AD8300AR | Why it matters |
|---|---|---|---|
| Function / Type | Logarithmic amplifier (demodulating, 500 MHz) | 12-bit digital-to-analog converter (DAC) | These are fundamentally different device classes, so they are not functionally substitutable in any design. |
| Package | 8-lead SOIC (R-8) | 8-lead SOIC (R-8) | Package compatibility affects PCB footprint and assembly, though here the pin functions differ despite the same outline. |
| Supply Voltage | 2.7 V to 5.5 V single supply | +5 V nominal (single supply) | Operating voltage range determines power-rail compatibility and whether the part can run from low-voltage systems. |
| Signal Path Role | RF/IF signal detection and logarithmic conversion | Digital-to-analog signal generation | One processes analog input signals while the other generates analog outputs from digital codes, so they serve opposite ends of a signal chain. |
| Frequency / Update Rate | DC to 500 MHz input bandwidth | Digital interface update rate (DAC conversion) | The AD8307 handles high-frequency RF inputs, whereas the AD8300 operates on digital data rates, reflecting their different application domains. |
| Output Type | Analog voltage proportional to log of input (dB) | Analog voltage/current from 12-bit digital code | Output characteristics define how each device interfaces with downstream circuitry and cannot be interchanged. |
| Resolution / Dynamic Range | ~90 dB dynamic range, log conformance | 12-bit DAC resolution | These metrics describe entirely different performance aspects (log detection range vs. DAC bit resolution) and are not comparable for substitution. |
| Interface | Analog input, analog output (no digital bus) | Digital input (serial/parallel) to analog output | Interface type determines how the device connects to a system; one is purely analog while the other requires a digital control bus. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | AD8307ARZ-RL7 | AD8300AR |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | - | 12 |
| Number of D/A Converters | - | 1 |
| Settling Time | - | 14µs (Typ) |
| Output Type | - | Voltage - Buffered |
| Differential Output | - | No |
| Data Interface | - | SPI, DSP |
| Reference Type | - | Internal |
| Voltage - Supply, Analog | - | 2.7V ~ 5.5V |
| Voltage - Supply, Digital | - | 2.7V ~ 5.5V |
| INL / DNL(LSB) | - | ±0.5, ±0.5 |
| Architecture | - | R-2R |
| Operating Temperature | - | -40°C ~ 85°C |
| Type | Logarithmic Amplifier | - |
| Applications | Receiver Signal Strength Indication (RSSI) | - |
| Mounting Type | Surface Mount | - |
Frequently asked questions
Are the AD8307ARZ-RL7 and AD8300AR functionally interchangeable?
No. The AD8307ARZ-RL7 is a 500 MHz, 92 dB logarithmic amplifier (log amp) that converts an RF/IF signal to a decibel-scaled DC output, while the AD8300AR is a 12-bit digital-to-analog converter (DAC) with a voltage output. They perform entirely different functions and are not substitutes for one another.
What are the core functions of the AD8307ARZ-RL7 and AD8300AR?
The AD8307ARZ-RL7 is a monolithic logarithmic amplifier/detector providing a DC output proportional to the logarithm of the input signal, used for RSSI and signal-strength measurement. The AD8300AR is a 12-bit voltage-output DAC that converts digital input codes into an analog output voltage.
What package types do the AD8307ARZ-RL7 and AD8300AR use?
Both devices are supplied in 8-lead SOIC packages. The AD8307ARZ-RL7 is specified as an 8-lead SOIC (R-8) in tape-and-reel form (RL7 suffix), and the AD8300AR is also an 8-lead SOIC device. Pin functions differ because the two parts have different internal circuits.
What are the key performance specifications of the AD8307ARZ-RL7?
The AD8307ARZ-RL7 operates over a 500 MHz bandwidth with a nominal 92 dB dynamic range, providing a logarithmic output slope of approximately 25 mV/dB and an intercept of about -84 dBm (referenced to 50 ohms). It operates from a single supply in the 2.7 V to 5.5 V range.
What are the key performance specifications of the AD8300AR?
The AD8300AR is a 12-bit voltage-output DAC with a serial interface, operating from a single 2.7 V to 5.5 V supply. It provides a rail-to-rail voltage output and is specified for monotonic 12-bit performance, making it suitable for digital gain and offset control applications.
Can the AD8307ARZ-RL7 and AD8300AR be used together in a signal chain?
Yes, they can serve complementary roles in a system. The AD8307ARZ-RL7 can measure RF/IF signal strength and produce a DC voltage proportional to input power, while the AD8300AR can generate a control voltage from digital commands. They are not direct replacements but can coexist in the same design for measurement and control functions.
Do the AD8307ARZ-RL7 and AD8300AR share the same supply voltage requirements?
Both devices operate from a single supply in the 2.7 V to 5.5 V range, so they can share a common supply rail in a mixed-signal design. However, each device has its own decoupling and layout requirements that must be observed per the respective datasheets.
What are the typical applications for each device?
The AD8307ARZ-RL7 is typically used for RSSI measurement, received signal strength indication, transmitter power monitoring, and logarithmic signal detection in RF/IF systems. The AD8300AR is typically used for digital gain/offset adjustment, programmable voltage generation, and DAC-based control loops in instrumentation and communication systems.