AD8421BRZ
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 1263 個数
- Package
- SOIC-8
- Series
- リニアアンプ - 計装用、オペアンプ、バッファアンプ
AD8421BRZとAD8422BRZ-RLの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The AD8422BRZ-RL is a viable functional replacement candidate for the AD8421BRZ in many instrumentation amplifier applications, sharing the same SOIC-8 footprint, unity-gain-stable architecture, and comparable supply range. However, the AD8422 offers lower bandwidth and a different noise and distortion profile, so gain-bandwidth-sensitive or wideband precision designs should be validated against the original AD8421 specifications before substitution.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8421BRZ | AD8422BRZ-RL | Why it matters |
|---|---|---|---|
| Gain Bandwidth Product (GBP) | 10 MHz | 2.2 MHz | Determines the maximum frequency at which the amplifier can provide useful gain; a higher GBP supports wider-bandwidth signal conditioning. |
| Input Voltage Noise (1 kHz) | 3 nV/√Hz | 8 nV/√Hz | Lower input voltage noise improves resolution for low-level signals, which is critical in precision sensor and instrumentation front ends. |
| Input Offset Voltage (max) | 60 µV | 70 µV | Offset voltage directly adds DC error to the measured signal; tighter offset improves absolute accuracy in high-gain applications. |
| Supply Current per Amplifier (typ) | 2.3 mA | 0.3 mA | Quiescent current affects power budget and thermal load, especially important for portable and battery-powered instrumentation. |
| CMRR (DC to 60 Hz, G=1000) | 134 dB | 126 dB | Common-mode rejection ratio determines how well the amplifier rejects interfering common-mode signals; higher CMRR yields better noise immunity. |
| Input Bias Current (max) | 1 nA | 0.5 nA | Low bias current minimizes errors when interfacing with high-impedance sources such as sensors and electrode arrays. |
| Slew Rate | 35 V/µs | 0.8 V/µs | Slew rate limits how fast the output can respond to large signal steps; higher slew rate supports faster transient and pulse measurements. |
| Supply Voltage Range | ±2.5 V to ±18 V | ±2.3 V to ±18 V | The usable supply range determines compatibility with system rails and headroom for signal swing in single- or dual-supply designs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | The rated temperature range confirms suitability for industrial and commercial environments and ensures specified performance over temperature. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Matching package and pinout enables drop-in board-level substitution without layout changes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8421BRZ | AD8422BRZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Output Type | - | Rail-to-Rail |
| Slew Rate | 35V/µs | 0.8V/µs |
| -3 dB Bandwidth | 10 MHz | 2.2 MHz |
| Current - Input Bias | 100 pA | 200 pA |
| Voltage - Input Offset | 25 µV | 25 µV |
| Supply Current | 2mA | 300µA |
| Current - Output / Channel | 65 mA | 20 mA |
| Voltage - Supply Span(Min) | 5 V | 4.6 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8421BRZ is a low-power, low-noise instrumentation amplifier with a typical supply current of 2.3 mA and a typical input voltage noise of 3 nV/√Hz at 1 kHz, offered in an 8-lead SOIC package. The AD8422BRZ-RL is a lower-power instrumentation amplifier with a typical supply current of 300 µA and a typical input voltage noise of 8 nV/√Hz at 1 kHz, supplied in an 8-lead SOIC package in tape-and-reel format. The AD8421BRZ targets higher bandwidth and lower noise, while the AD8422BRZ-RL targets lower power consumption.
Both devices are offered in an 8-lead SOIC package with the standard instrumentation amplifier pinout (gain-setting resistor pins, inverting and non-inverting inputs, reference, output, and supply pins). Designers should confirm the exact package outline and land pattern against the respective manufacturer datasheets before substituting one for the other on an existing PCB.
The AD8421BRZ has a typical supply current of 2.3 mA, whereas the AD8422BRZ-RL has a typical supply current of 300 µA. The AD8422BRZ-RL is therefore better suited to battery-powered or power-constrained designs, while the AD8421BRZ trades higher supply current for lower voltage noise and higher bandwidth.
The AD8421BRZ specifies a typical input voltage noise of 3 nV/√Hz at 1 kHz, while the AD8422BRZ-RL specifies a typical input voltage noise of 8 nV/√Hz at 1 kHz. For low-level signal amplification where noise performance is critical, the AD8421BRZ provides the lower noise floor.
Both the AD8421BRZ and AD8422BRZ-RL use a single external gain-setting resistor to program gain, supporting gains from 1 to 1000. The gain equation and resistor value selection should be taken from the respective manufacturer datasheets, as the internal resistor values differ between the two devices.
Not without validation. Although both are 8-lead SOIC instrumentation amplifiers, they differ in supply current, noise, bandwidth, and gain-setting resistor values. A substitution requires verifying that the lower bandwidth and higher noise of the AD8422BRZ-RL meet the application requirements and that the gain resistor is recalculated per its datasheet.
The -RL suffix indicates that the AD8422BRZ-RL is supplied in tape-and-reel packaging, which is intended for automated high-volume PCB assembly. The AD8421BRZ is typically supplied in standard tube or tray packaging; the electrical performance of the device is not changed by the packaging suffix.