AD8422ARZ
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 3872 個数
- Package
- SOIC-8
- Series
- リニアアンプ - 計装用、オペアンプ、バッファアンプ
AD8422ARZとAD8421BRZ-RLの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The AD8422ARZ and AD8421BRZ-RL are both precision instrumentation amplifiers in the same SOIC-8 package with pin-compatible footprints, making the AD8422ARZ a viable functional replacement candidate for the AD8421BRZ-RL in many designs. However, the two devices differ in gain-bandwidth, noise, and supply range characteristics, so validation against the target application's bandwidth, noise, and supply requirements is recommended before substitution.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8422ARZ | AD8421BRZ-RL | Why it matters |
|---|---|---|---|
| Number of Channels | 1 | 1 | Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent. |
| Gain Bandwidth Product (GBP) | 2.2 MHz | 10 MHz | Higher GBP allows the AD8421 to maintain accurate gain at higher signal frequencies, affecting bandwidth-critical designs. |
| Input Voltage Noise (1 kHz) | 8 nV/√Hz | 3 nV/√Hz | Lower input noise improves signal-to-noise ratio for low-level sensor signals; the AD8421 is notably quieter. |
| Input Offset Voltage (max) | 70 µV | 60 µV | Offset voltage directly adds DC error to the amplified signal; lower offset improves precision in DC-coupled measurements. |
| Supply Voltage Range | ±2.3 V to ±18 V (4.6 V to 36 V) | ±2.5 V to ±18 V (5 V to 36 V) | Slightly wider low-end supply range on the AD8422 allows operation at lower single-supply voltages. |
| Quiescent Supply Current | 300 µA | 2.3 mA | Lower quiescent current makes the AD8422 preferable for battery-powered or low-power applications. |
| CMRR (G=1000, DC to 60 Hz) | 120 dB | 134 dB | Higher common-mode rejection suppresses interference; the AD8421 offers superior rejection in high-gain precision measurements. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings mean both suit the same industrial environments. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Same package footprint enables drop-in board-level substitution without layout changes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8422ARZ | AD8421BRZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Slew Rate | 0.8V/µs | 35V/µs |
| -3 dB Bandwidth | 2.2 MHz | 10 MHz |
| Current - Input Bias | 500 pA | 100 pA |
| Voltage - Input Offset | 60 µV | 25 µV |
| Supply Current | 300µA | 2mA |
| Current - Output / Channel | 20 mA | 65 mA |
| Voltage - Supply Span(Min) | 4.6 V | 5 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Output Type | Rail-to-Rail | - |
The AD8422ARZ is an instrumentation amplifier in an 8-lead SOIC package with a gain range of 1 to 1000, a supply range of ±2.3 V to ±18 V, and a typical input offset voltage of 70 µV. The AD8421BRZ-RL is a lower-noise instrumentation amplifier in an 8-lead SOIC package with a gain range of 1 to 10000, a supply range of ±2.25 V to ±18 V, and a typical input voltage noise of 3 nV/√Hz. The AD8421BRZ-RL offers lower noise and wider gain range, while the AD8422ARZ offers lower power consumption.
No, they are not pin-for-pin or specification-for-specification drop-in replacements. Although both are 8-lead SOIC instrumentation amplifiers, they differ in gain-setting resistor values, noise performance, bandwidth, and supply current. The gain equation and external resistor selection must be recalculated, and the circuit must be revalidated for noise, bandwidth, and stability before substitution.
The AD8421BRZ-RL has a typical input voltage noise of 3 nV/√Hz at 1 kHz, making it suitable for low-level signal amplification. The AD8422ARZ has a higher typical input voltage noise of 8 nV/√Hz at 1 kHz. For applications requiring the lowest possible noise floor, the AD8421BRZ-RL is the preferred choice.
Both devices set gain using a single external resistor. The AD8422ARZ supports gains from 1 to 1000, while the AD8421BRZ-RL supports gains from 1 to 10000. The gain resistor formula differs between the two parts, so the external resistor value must be selected according to each device's respective datasheet equation.
The AD8422ARZ operates from ±2.3 V to ±18 V and typically draws 300 µA of supply current. The AD8421BRZ-RL operates from ±2.25 V to ±18 V and typically draws 2.3 mA of supply current. The AD8422ARZ is therefore better suited to low-power, battery-operated designs, while the AD8421BRZ-RL trades higher power for lower noise and wider gain range.
At a gain of 100, the AD8422ARZ provides a typical -3 dB bandwidth of approximately 200 kHz, while the AD8421BRZ-RL provides a typical -3 dB bandwidth of approximately 200 kHz as well. Bandwidth should always be confirmed against the specific gain and supply conditions in the manufacturer datasheet.
Yes, both the AD8422ARZ and AD8421BRZ-RL are offered in an 8-lead SOIC package with the same pin functions: gain resistor pins, inverting and non-inverting inputs, reference, output, and supply pins. However, identical pinout does not guarantee identical electrical performance, so circuit-level validation is still required.
The AD8421BRZ-RL is generally better suited for precision low-level sensor amplification because of its lower input voltage noise of 3 nV/√Hz and wider gain range up to 10000. The AD8422ARZ remains a viable option where lower supply current is more critical than the lowest achievable noise floor.