ADA4004-4ARZ
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 4895 個数
- Package
- SOIC-14
- Series
- リニアアンプ - 計装用、オペアンプ、バッファアンプ
ADA4004-4ARZとADA4062-2ARZの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADA4062-2ARZ and ADA4004-4ARZ are not functionally interchangeable: they differ in channel count, package footprint, supply voltage range, and quiescent current, so the ADA4004-4ARZ cannot directly replace the ADA4062-2ARZ without circuit and layout redesign.
テキサス・インスツルメンツ
テキサス・インスツルメンツ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADA4062-2ARZ | ADA4004-4ARZ | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 2 | 4 | Determines how many independent amplifier channels are available in a single package, directly affecting circuit density and channel count. |
| Input Offset Voltage (Max) | 175 µV | 125 µV | Lower offset voltage improves DC precision; a difference here affects accuracy in high-gain or precision signal chains. |
| Input Bias Current (Typ) | 0.5 pA | 40 nA | Bias current impacts error in high-impedance circuits; the JFET-input ADA4062 offers far lower bias current than the bipolar ADA4004. |
| Gain Bandwidth Product | 1.4 MHz | 12 MHz | GBW sets the achievable closed-loop bandwidth and small-signal speed; the ADA4004 supports much wider bandwidth applications. |
| Slew Rate | 3.3 V/µs | 2.7 V/µs | Slew rate limits large-signal response and distortion at high frequencies; affects how fast the output can track input transients. |
| Input Voltage Noise Density (1 kHz) | 36 nV/√Hz | 10 nV/√Hz | Lower voltage noise improves SNR in low-level signal amplification; the ADA4004 is significantly quieter for precision sensing. |
| Supply Current per Amplifier (Typ) | 165 µA | 1.7 mA | Quiescent current drives power budget; the ADA4062 is far more power-efficient, suited to battery-powered designs. |
| Supply Voltage Range | ±5 V to ±15 V | ±5 V to ±15 V | Defines the allowable power supply window; matching ranges allow drop-in use in the same supply rails. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Confirms both parts are rated for industrial/extended temperature environments, ensuring reliability under the same conditions. |
| Package | 8-Lead SOIC | 14-Lead SOIC | Package footprint and pin count affect PCB layout and cannot be directly substituted without board redesign. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADA4004-4ARZ | ADA4062-2ARZ |
|---|---|---|
| Series | iPolar® | - |
| Part Status | Active | Active |
| Amplifier Type | General Purpose | J-FET |
| Number of Circuits | 4 | 2 |
| Slew Rate | 2.7V/µs | 3.3V/µs |
| Gain Bandwidth Product | 12 MHz | 1.4 MHz |
| Current - Input Bias | 40 nA | 2 pA |
| Voltage - Input Offset | 40 µV | 750 µV |
| Current - Output / Channel | 10 mA | 20 mA |
| Voltage - Supply Span(Min) | 10 V | 8 V |
| Voltage - Supply Span(Max) | 30 V | 36 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Supply Current | - | 165µA (x2 Channels) |
The ADA4062-2ARZ is a dual-channel, low-power JFET-input operational amplifier, while the ADA4004-4ARZ is a quad-channel, precision bipolar-input operational amplifier. The ADA4062-2ARZ offers low input bias current and low power consumption, whereas the ADA4004-4ARZ provides lower voltage noise and higher precision, making them suited to different application requirements.
The ADA4062-2ARZ integrates two operational amplifiers in a single package, while the ADA4004-4ARZ integrates four operational amplifiers. This difference affects PCB layout density and the number of signal channels that can be implemented per package.
The ADA4062-2ARZ uses a JFET input stage, which provides very low input bias current, typically in the picoampere range. The ADA4004-4ARZ uses a bipolar input stage, which has higher input bias current than the JFET-input ADA4062-2ARZ. The lower bias current of the ADA4062-2ARZ benefits high-impedance sensor interfaces.
The ADA4004-4ARZ is specified with low voltage noise density, making it suitable for precision signal conditioning where noise performance is critical. The ADA4062-2ARZ has higher voltage noise density than the ADA4004-4ARZ. Designs prioritizing low noise should evaluate the ADA4004-4ARZ, while low-power, high-impedance applications may favor the ADA4062-2ARZ.
No. The ADA4062-2ARZ is a dual op-amp in an 8-lead SOIC package, while the ADA4004-4ARZ is a quad op-amp in a 14-lead SOIC package. The different package sizes and pin counts mean they are not pin-compatible and cannot be directly substituted without PCB redesign.
The ADA4062-2ARZ is well suited to low-power, high-impedance signal chains such as photodiode and pH sensor interfaces, where low input bias current is important. The ADA4004-4ARZ is suited to precision, low-noise multichannel applications such as instrumentation amplifiers and active filters, where low offset and low voltage noise are required.
The ADA4062-2ARZ is designed for low power consumption, with a low supply current per amplifier. The ADA4004-4ARZ, as a precision quad op-amp, draws more total supply current per package due to its four channels and bipolar input stage. Power-sensitive designs should account for the total quiescent current of each package.
Both devices are specified for operation on dual supplies in the range of ±5 V to ±15 V, as well as single-supply configurations within their specified limits. Designers should verify the exact supply range and output swing requirements against the respective manufacturer datasheets for the target operating conditions.