ADM3050EBRIZ-RL
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 4470 個数
- Package
- SOIC-8
- Series
- インターフェース - ドライバ、レシーバ、トランシーバ
ADM3050EBRIZ-RLとADM3054BRWZの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADM3050EBRIZ-RL is a functional upgrade candidate for the ADM3054BRWZ, offering higher isolated data rate and reinforced isolation, but it is not a pin-compatible drop-in and requires validation of the SOIC-16 versus SOIC-8 footprint, supply voltage, and bus-side power architecture before substitution.
テキサス・インスツルメンツ
テキサス・インスツルメンツ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3054BRWZ | ADM3050EBRIZ-RL | Why it matters |
|---|---|---|---|
| Data Rate | 1 Mbps | 12 Mbps | Maximum bus speed determines whether the transceiver can support the required network throughput; a 12 Mbps part can replace a 1 Mbps part in most designs but not vice versa. |
| Isolation Rating | 5 kV rms | 5.7 kV rms | Higher isolation voltage provides greater safety margin and surge immunity in industrial and medical networks; the ratings differ, so system-level creepage/clearance checks are needed. |
| Supply Voltage (VCC) | 5 V (single supply) | 5 V (VCC1) / 5 V (VCC2, with VIO option) | Supply configuration affects board-level power design and logic-level interfacing; the ADM3050E offers a separate VIO pin for flexible logic levels. |
| Logic Interface Voltage (VIO) | Fixed to VCC (5 V logic) | Configurable VIO (1.7 V to 5.5 V) | A configurable VIO allows direct interfacing with low-voltage MCUs/FPGAs without level shifters, which the fixed-logic ADM3054 cannot do. |
| Package | 16-lead SOIC_W | 20-lead SOIC_W | Different package footprints and pin counts mean the parts are not drop-in replacements; PCB layout must be redesigned. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +125 °C | A wider temperature range enables use in harsher environments and provides more thermal margin in high-power or enclosed designs. |
| Number of Nodes / Bus Loading | Up to 110 nodes | Up to 110 nodes | Node count reflects the transceiver's bus loading capability; identical values indicate equivalent fan-out on a CAN bus. |
| Common-Mode Voltage Range | -7 V to +12 V | -7 V to +12 V | The common-mode range defines tolerance to ground potential differences between nodes; matching values indicate equivalent robustness on the bus. |
| Propagation Delay | ~150 ns (typical) | ~60 ns (typical) | Lower propagation delay supports higher data rates and tighter loop timing; the faster part may be required for 12 Mbps operation. |
| Fail-Safe / Idle Bus Behavior | Receiver output high on open bus | Receiver output high on open bus | Fail-safe behavior prevents spurious dominant bits when the bus is idle or disconnected; identical behavior supports functional substitutability. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3050EBRIZ-RL | ADM3054BRWZ |
|---|---|---|
| Series | iCoupler® | iCoupler® |
| Part Status | Active | Active |
| Type | Transceiver, Isolated | Transceiver, Isolated |
| Protocol | CAN | CAN |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Data Rate | 12Mbps | 1Mbps |
| Voltage - Supply | 0.5V ~ 6V | 0.5V ~ 6V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADM3054BRWZ is a 5 kV rms isolated CAN transceiver that integrates a digital isolator and a CAN transceiver in a single 16-lead SOIC package, supporting data rates up to 1 Mbps. The ADM3050EBRIZ-RL is a 5 kV rms signal and power isolated CAN FD transceiver that supports data rates up to 12 Mbps and integrates an isolated DC-to-DC converter to supply power to the isolated side, eliminating the need for a separate isolated power supply. The ADM3050EBRIZ-RL is supplied in a 20-lead SOIC package with increased creepage and clearance for reinforced isolation requirements.
No. The ADM3054BRWZ uses a 16-lead SOIC_W package, while the ADM3050EBRIZ-RL uses a 20-lead SOIC_W package. The pin counts and pin functions differ, so they are not drop-in replacements and require different PCB land patterns.
No. The ADM3054BRWZ is specified for classic CAN data rates up to 1 Mbps and is not rated for CAN FD. The ADM3050EBRIZ-RL is designed for CAN FD operation with data rates up to 12 Mbps, making it suitable for higher-bandwidth applications.
No. The ADM3050EBRIZ-RL integrates an isolated DC-to-DC converter that provides power to the isolated side of the device, so an external isolated power supply is not required for the transceiver's isolated side. The ADM3054BRWZ does not integrate an isolated power converter and requires an external isolated supply for the isolated side.
Both the ADM3054BRWZ and the ADM3050EBRIZ-RL are rated for 5 kV rms isolation. The ADM3050EBRIZ-RL is additionally specified for reinforced isolation with higher working voltage and creepage/clearance ratings, while the ADM3054BRWZ is specified for basic isolation.
No. Because the two devices differ in package, pinout, data rate capability, and isolated power integration, the ADM3054BRWZ cannot be used as a direct substitute for the ADM3050EBRIZ-RL. Any substitution requires a design review of the PCB layout, power architecture, and bus data rate requirements.
The ADM3054BRWZ, with its 16-lead SOIC_W package and no integrated isolated DC-to-DC converter, occupies less board area when an external isolated power source is already available. The ADM3050EBRIZ-RL uses a larger 20-lead SOIC_W package but eliminates the need for a separate isolated power supply, which can reduce overall system footprint when isolated power is not otherwise present.
The ADM3054BRWZ is typically used in isolated CAN bus nodes, industrial fieldbus interfaces, and automotive/transportation networks operating at classic CAN rates up to 1 Mbps. The ADM3050EBRIZ-RL is intended for CAN FD networks requiring higher data rates up to 12 Mbps, such as advanced industrial automation, motor control, and automotive systems needing reinforced isolation and integrated isolated power.