ADM3485EAR
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 3150 個数
- Package
- SOIC-8
- Series
- インターフェース - ドライバ、レシーバ、トランシーバ
ADM3485EARとADM3485ARZの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADM3485EAR is a functional replacement candidate for the ADM3485ARZ, sharing the same RS-485 transceiver function, 3.3 V supply, SOIC-8 footprint, and industrial temperature range. The primary distinction is the enhanced ESD protection on the ADM3485EAR, which requires validation against the target application's transient immunity requirements before substitution.
テキサス・インスツルメンツ
テキサス・インスツルメンツ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3485ARZ | ADM3485EAR | Why it matters |
|---|---|---|---|
| ESD Protection (IEC 61000-4-2) | ±8 kV contact / ±15 kV air (standard) | ±15 kV contact / ±15 kV air (enhanced) | Higher ESD ratings improve robustness in harsh industrial environments and reduce field failures from electrostatic discharge. |
| Data Rate | 10 Mbps | 10 Mbps | Both support the same maximum data rate, so bus timing and cable length constraints remain equivalent. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Identical temperature ratings ensure the same environmental suitability for industrial applications. |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | Matching supply ranges confirm both parts are drop-in compatible for 3.3 V systems. |
| Duplex Mode | Half-duplex | Half-duplex | Both are half-duplex RS-485 transceivers, so bus topology and driver/receiver enable logic are interchangeable. |
| Number of Drivers/Receivers | 1 driver / 1 receiver | 1 driver / 1 receiver | Identical transceiver count means the same network node configuration applies to both parts. |
| Package | 8-lead SOIC | 8-lead SOIC | Same package and pinout allow direct PCB replacement without layout changes. |
| Fail-Safe Receiver | Yes (open/short circuit) | Yes (open/short circuit) | Fail-safe receivers guarantee a defined logic state on floating or terminated buses, preventing spurious data. |
| ESD Protection (Human Body Model) | ±15 kV HBM | ±15 kV HBM | Equivalent HBM ratings indicate comparable handling robustness during assembly and field use. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3485EAR | ADM3485ARZ |
|---|---|---|
| Part Status | Obsolete | Active |
| Type | Transceiver | Transceiver |
| Protocol | RS422, RS485 | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Half | Half |
| Receiver Hysteresis | 50 mV | 50 mV |
| Data Rate | 10Mbps | 10Mbps |
| Voltage - Supply | 3V ~ 3.6V | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
Both are 3.3 V, half-duplex RS-485/RS-422 transceivers in an 8-lead SOIC package. The primary difference is the ESD protection level: the ADM3485ARZ offers ±15 kV ESD protection on the RS-485 bus pins, while the ADM3485EAR offers enhanced ±15 kV IEC 61000-4-2 contact discharge and ±15 kV air discharge protection, making the EAR variant better suited for harsh environments requiring higher immunity.
Yes. Both devices are offered in the same 8-lead SOIC (R-8) package with identical pin assignments: RO, RE, DE, DI, GND, A, B, and VCC. This allows the ADM3485EAR to be used as a drop-in replacement for the ADM3485ARZ on an existing PCB layout.
Yes. Both the ADM3485ARZ and ADM3485EAR operate from a single 3.3 V supply and support data rates up to 12 Mbps, making them suitable for high-speed RS-485/RS-422 communication networks.
The ADM3485ARZ provides ±15 kV ESD protection on the RS-485 bus pins (A and B) per the human body model. The ADM3485EAR provides enhanced ESD protection compliant with IEC 61000-4-2, offering ±15 kV contact discharge and ±15 kV air discharge on the bus pins, which is more robust for industrial environments.
In most cases yes, since both share the same package, pinout, supply voltage, and data rate. However, the ADM3485EAR's enhanced IEC 61000-4-2 ESD rating may allow removal of external TVS diodes in some designs, so the overall protection scheme should be reviewed against the target application's requirements.
Both the ADM3485ARZ and ADM3485EAR are half-duplex RS-485/RS-422 transceivers, featuring separate receiver output (RO) and driver input (DI) pins with active-low receiver enable (RE) and active-high driver enable (DE) control pins.
Both the ADM3485ARZ and ADM3485EAR are specified for the industrial temperature range of −40°C to +85°C, making them suitable for industrial automation, building control, and other demanding applications.