ADM3485EAR
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 3150 個数
- Package
- SOIC-8
- Series
- インターフェース - ドライバ、レシーバ、トランシーバ
ADM3485EARとADM3491EARZの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADM3491EARZ and ADM3485EAR are both 3.3 V RS-485/RS-422 transceivers from Analog Devices in the same 8-lead SOIC package, making them a strong functional replacement candidate. The ADM3491EARZ offers full-duplex operation with a higher maximum data rate and enhanced ESD protection, while the ADM3485EAR is a half-duplex device. Designers must confirm the duplex configuration and data rate requirements of the target application before substituting, but the shared supply voltage, package footprint, and transceiver function support a viable drop-in candidate pending validation of the duplex and speed differences.
テキサス・インスツルメンツ
テキサス・インスツルメンツ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3491EARZ | ADM3485EAR | Why it matters |
|---|---|---|---|
| Duplex Mode | Full duplex | Half duplex | Full duplex allows simultaneous transmit and receive, while half duplex shares the bus; this fundamentally changes wiring and protocol compatibility. |
| Number of Drivers / Receivers | 1 driver / 1 receiver | 1 driver / 1 receiver | Both provide a single differential channel, but the duplex difference means the driver/receiver are wired differently on the bus. |
| Data Rate | 12 Mbps | 12 Mbps | Maximum signaling rate determines throughput capability; identical rates mean similar speed performance. |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | Operating supply range must match the system rail; both are 3.3 V nominal devices. |
| Number of Pins / Package | 14-lead SOIC | 8-lead SOIC | Different pin counts and footprints prevent direct drop-in replacement on the same PCB layout. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Industrial temperature range suitability is identical, so environmental compatibility is the same. |
| ESD Protection (Bus Pins) | ±15 kV (HBM) | ±15 kV (HBM) | Robust ESD protection on bus pins improves field reliability; both offer equivalent protection levels. |
| Fail-Safe Receiver | Yes (open/short circuit) | Yes (open/short circuit) | Fail-safe receivers guarantee a defined logic output when the bus is idle or faulted, preventing spurious data. |
| Receiver Input Impedance | 1/8 unit load (up to 256 nodes) | 1/8 unit load (up to 256 nodes) | Lower unit load allows more transceivers on a shared bus; both support up to 256 nodes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3485EAR | ADM3491EARZ |
|---|---|---|
| Part Status | Obsolete | Active |
| Type | Transceiver | Transceiver |
| Protocol | RS422, RS485 | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Half | Full |
| Receiver Hysteresis | 50 mV | 50 mV |
| Data Rate | 10Mbps | 10Mbps |
| Voltage - Supply | 3V ~ 3.6V | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADM3491EARZ is a full-duplex RS-485/RS-422 transceiver with separate driver and receiver enable pins, while the ADM3485EAR is a half-duplex RS-485/RS-422 transceiver with combined driver/receiver enable control. The ADM3491EARZ provides four signal lines (A, B, Y, Z) for full-duplex communication, whereas the ADM3485EAR uses two signal lines (A, B) for half-duplex operation.
No. The ADM3491EARZ is offered in a 14-lead SOIC package, while the ADM3485EAR is offered in an 8-lead SOIC package. The pin counts and pin functions differ, so they are not drop-in replacements for each other.
Both devices are specified for data rates up to 12 Mbps, making them suitable for high-speed RS-485/RS-422 communication links.
Yes. Both transceivers operate from a single 3.3 V supply, which allows them to interface directly with 3.3 V logic without level shifting.
Both devices include true fail-safe receiver inputs, ensuring a known logic-high receiver output when the inputs are open, shorted, or terminated but undriven. This prevents indeterminate output states during idle or fault conditions on the bus.
Both devices feature enhanced ESD protection on the RS-485/RS-422 bus pins, specified to withstand ±15 kV using the Human Body Model (HBM), which helps protect the transceivers in harsh industrial environments.
The ADM3491EARZ should be selected for full-duplex applications requiring simultaneous transmit and receive over separate twisted pairs. The ADM3485EAR is appropriate for half-duplex applications where a single twisted pair is shared for transmit and receive, reducing cabling and cost.
Yes. Both devices are specified for the industrial temperature range of −40°C to +85°C, supporting use in industrial automation, instrumentation, and other demanding environments.