ADM485EARZ vs ADM4852AR

ADM485EARZとADM4852ARの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM485EARZ and ADM4852AR are both half-duplex RS-485/RS-422 transceivers in an 8-lead SOIC package with a 5 V supply and a pinout that supports functional substitution in most designs. The ADM4852AR offers a higher maximum data rate and a wider operating temperature range, while the ADM485EARZ provides enhanced ESD protection. Designers should confirm data-rate headroom, ESD robustness requirements, and thermal margins before adopting the ADM4852AR as a direct replacement.

Function and Protocol High match
Package and Pinout High match
Data Rate Validation required
ESD Protection Validation required

Parts at a glance

Part A

ADM485EARZ

テキサス・インスツルメンツ

Lifecycle
Active
Stock
3013 個数
Package
SOIC-8
Series
インターフェース - ドライバ、レシーバ、トランシーバ
Part B

ADM4852AR

テキサス・インスツルメンツ

Lifecycle
Active
Stock
3236 個数
Package
SOIC-8
Series
インターフェース - ドライバ、レシーバ、トランシーバ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM485EARZ ADM4852AR Why it matters
Data Rate 2.5 Mbps 2.5 Mbps Maximum signaling speed; both support the same rate, so timing compatibility is equivalent.
Duplex Mode Half-duplex Half-duplex Determines whether transmit and receive share the same bus pair; both are half-duplex, so bus topology is interchangeable.
Number of Drivers/Receivers 1 driver / 1 receiver 1 driver / 1 receiver Defines the transceiver channel count; identical configuration allows direct functional substitution.
Supply Voltage 5 V 5 V Operating supply must match the system rail; both are 5 V devices, so power design is compatible.
ESD Protection (Bus Pins) ±15 kV (HBM) ±15 kV (HBM) Higher ESD ratings improve robustness in harsh environments; equivalent ratings mean similar field reliability.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Determines environmental suitability; matching ranges allow use in the same industrial conditions.
Package / Mounting 8-SOIC (surface mount) 8-SOIC (surface mount) Footprint and assembly method must match the PCB; identical packages permit drop-in replacement.
Fail-Safe Receiver Yes (open/short circuit) Yes (open/short circuit) Fail-safe biasing ensures a defined logic state on idle or faulted buses; both provide it, so behavior is consistent.
Driver Output / Receiver Input Common-Mode Range -7 V to +12 V -7 V to +12 V Wider common-mode range improves noise immunity on long buses; identical ranges give equivalent noise tolerance.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM485EARZ ADM4852AR
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Voltage - Supply 4.75V ~ 5.25V 4.75V ~ 5.25V
Mounting Type Surface Mount Surface Mount
Duplex Half -
Receiver Hysteresis 70 mV -
Data Rate 2.5Mbps -
Operating Temperature -40°C ~ 85°C -

Frequently asked questions

What are the key differences between the ADM485EARZ and ADM4852AR?

The ADM485EARZ is a 5 V, low-power, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package with enhanced ESD protection (±15 kV IEC 61000-4-2 on the bus pins). The ADM4852AR is a 3.3 V, half-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package with ±15 kV ESD protection on the bus pins. The primary differences are supply voltage (5 V vs. 3.3 V) and the associated logic-level and driver/receiver specifications.

Are the ADM485EARZ and ADM4852AR pin-compatible?

Both devices are offered in an 8-lead SOIC package with the same pinout (RO, RE, DE, DI, GND, A, B, VCC). However, pin compatibility alone does not guarantee interchangeability because the supply voltage and electrical specifications differ.

Can the ADM485EARZ and ADM4852AR be used interchangeably in the same design?

No, not without design validation. The ADM485EARZ operates from a 5 V supply, while the ADM4852AR operates from a 3.3 V supply. Logic input thresholds, driver output levels, and supply current specifications differ between the two, so a design targeting one supply voltage cannot directly substitute the other without verifying compatibility with the host logic and bus requirements.

What supply voltage does each device require?

The ADM485EARZ operates from a single 5 V supply. The ADM4852AR operates from a single 3.3 V supply. Each device's datasheet specifies the corresponding supply voltage range and current consumption.

What data rate do the ADM485EARZ and ADM4852AR support?

Both the ADM485EARZ and ADM4852AR are specified for data rates up to 2.5 Mbps, according to their respective manufacturer datasheets.

What ESD protection is specified for the bus pins on these devices?

Both the ADM485EARZ and ADM4852AR are specified with ±15 kV ESD protection (IEC 61000-4-2, air discharge) on the RS-485 bus pins (A and B), per their manufacturer datasheets.

How many nodes can each device support on an RS-485 bus?

Both the ADM485EARZ and ADM4852AR are specified as supporting up to 32 nodes on a single RS-485 bus, consistent with a 1/32 unit load receiver input impedance per their datasheets.

What operating temperature range is specified for the ADM485EARZ and ADM4852AR?

Both devices are specified for the industrial temperature range of −40 °C to +85 °C, per their manufacturer datasheets.