ADRF5021BCCZN vs ADRF5720BCCZN

ADRF5021BCCZNとADRF5720BCCZNの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADRF5720BCCZN and ADRF5021BCCZN are not functionally interchangeable despite sharing the same LFCSP package family and broad RF signal-chain role. The ADRF5720BCCZN is a 6-bit digital step attenuator covering DC to 40 GHz, while the ADRF5021BCCZN is an absorptive SPDT RF switch covering 9 kHz to 30 GHz. Their core functions, frequency coverage, control interfaces, and RF performance parameters differ fundamentally, so neither device can directly substitute for the other in an existing design without significant re-engineering and revalidation.

Different device function Different frequency range Different control interface Different RF topology

Parts at a glance

Part A

ADRF5021BCCZN

テキサス・インスツルメンツ

Lifecycle
Active
Stock
3911 個数
Package
LGA-20
Series
RFスイッチ
Part B

ADRF5720BCCZN

テキサス・インスツルメンツ

Lifecycle
Active
Stock
6772 個数
Package
LGA-24
Series
アッテネータ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADRF5720BCCZN ADRF5021BCCZN Why it matters
Function Digital step attenuator (DSA) SPDT RF switch These are fundamentally different component types; one attenuates signal amplitude while the other routes signals between ports, so they are not functionally interchangeable.
Frequency range 9 kHz to 40 GHz 9 kHz to 30 GHz The usable bandwidth determines whether the part can support the target application's operating frequency; the attenuator covers a wider upper band.
Attenuation range / configuration 0 to 31.5 dB, 6-bit, 0.5 dB LSB Not applicable (switch, no attenuation control) Attenuation range and step resolution define the amplitude control capability; a switch provides no programmable attenuation.
Insertion loss ~2.0 dB typical (at 0 dB setting, mid-band) ~1.0 dB typical (mid-band) Insertion loss directly impacts signal budget; lower loss preserves signal power through the component.
Control interface Serial/parallel digital control (SPI-compatible) Single digital control (TTL/CMOS) The control scheme affects system design complexity and required host interface; the attenuator needs multi-bit control while the switch needs a single logic line.
Package 24-lead LGA (BCCZN) 20-lead LGA (BCCZN) Package footprint and pin count affect PCB layout and cannot be directly swapped without board redesign.
Supply voltage 3.3 V (typical single supply) 3.3 V (typical single supply) Supply requirements determine power rail compatibility; both share a similar nominal rail but should be verified against the datasheet.
Input IP3 / linearity High linearity (IIP3 ~50 dBm typical) High linearity (IIP3 ~55 dBm typical) Linearity affects distortion in high-power signal chains; both are high-linearity parts but differ in rated performance.
Primary application role Gain/level control in RF signal chains Signal routing / path selection The intended system role differs, so substitution would change circuit function rather than simply replace a part.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADRF5021BCCZN ADRF5720BCCZN
Part Status Active Active
RF Type VSAT -
Topology Absorptive -
Circuit SPDT -
Frequency Range 9kHz ~ 30GHz 9 kHz ~ 40 GHz
Isolation 60dB -
Insertion Loss 2dB -
Test Frequency 30GHz -
P1d B 28dBm -
IIP3 52dBm -
Impedance 50Ohm 50 Ohms
Voltage - Supply 3.3V -
Operating Temperature -40°C ~ 85°C -
Attenuation Value - 0.5dB ~ 31.5dB
Power (Watts) - 500mW

Frequently asked questions

What are the primary functional differences between the ADRF5720BCCZN and ADRF5021BCCZN?

The ADRF5720BCCZN is a 6-bit digital attenuator with a frequency range of 9 kHz to 40 GHz, while the ADRF5021BCCZN is a reflective SPDT switch operating from 9 kHz to 30 GHz. The ADRF5720 provides attenuation control in 0.5 dB steps up to 31.5 dB, whereas the ADRF5021 routes RF signals between two paths with high isolation and low insertion loss.

Are the ADRF5720BCCZN and ADRF5021BCCZN pin-compatible?

No. Although both devices are housed in a 20-terminal LGA package (LCC-20), their pin functions and internal architectures differ. The ADRF5720 requires control logic for attenuation settings, while the ADRF5021 requires a complementary control voltage for switch path selection. They are not drop-in replacements for each other.

What are the operating frequency ranges of these two components?

The ADRF5720BCCZN is specified for operation from 9 kHz to 40 GHz. The ADRF5021BCCZN is specified for operation from 9 kHz to 30 GHz. Designs requiring coverage above 30 GHz should use the ADRF5720 for attenuation functions, but the ADRF5021 cannot be used as a switch in that upper band.

What control interface does each device use?

The ADRF5720BCCZN uses a 6-bit parallel control interface (P0 to P5) with latch enable and serial output capabilities for setting attenuation states. The ADRF5021BCCZN uses a single control voltage input (VCTRL) with a complementary logic threshold to select between RFC-to-RF1 and RFC-to-RF2 paths. The control schemes are not interchangeable.

How do the insertion loss and isolation specifications compare?

At 30 GHz, the ADRF5720BCCZN exhibits insertion loss of approximately 2.5 dB in the 0 dB attenuation state. The ADRF5021BCCZN provides insertion loss of approximately 1.6 dB and isolation of approximately 45 dB at 30 GHz. These parameters reflect different functions: attenuation versus signal routing, so direct comparison must account for the intended signal-chain role.

Can the ADRF5021BCCZN be used as a variable attenuator?

No. The ADRF5021BCCZN is a reflective SPDT switch and does not provide calibrated attenuation states. For variable attenuation, the ADRF5720BCCZN is the appropriate device, offering 6-bit control with 0.5 dB resolution and 31.5 dB total attenuation range.

What are the power handling capabilities of each device?

The ADRF5720BCCZN is rated for an input power of up to 30 dBm (1 W) in the 0 dB attenuation state, with derating at higher attenuation settings. The ADRF5021BCCZN is rated for a continuous wave input power of up to 33 dBm (2 W) at the RFC port. Power handling must be verified against the specific frequency and operating conditions in the datasheet.

Do both devices support the same supply voltage requirements?

No. The ADRF5720BCCZN requires a positive supply (VDD) of 3.3 V and a negative supply (VSS) of -3.3 V for proper operation. The ADRF5021BCCZN requires a positive supply (VDD) of 3.3 V and a negative supply (VSS) of -3.3 V, plus a control voltage (VCTRL) referenced to VDD. Supply rail requirements are similar but control biasing differs.