ADS1219IPWR vs ADS1286UC/2K5

ADS1219IPWRとADS1286UC/2K5の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1219IPWR and ADS1286UC/2K5 are not drop-in replacements for one another. The ADS1219IPWR is a 24-bit, 4-channel delta-sigma ADC with an integrated PGA and I2C interface in a TSSOP-16 package, while the ADS1286UC/2K5 is a 12-bit, single-channel delta-sigma ADC with a serial SPI interface in a SOIC-8 package. Their differences in resolution, channel count, digital interface, and package footprint make them functionally incompatible without a full redesign.

Different resolution Different channel count Different digital interface Different package footprint

Parts at a glance

Part A

ADS1219IPWR

STマイクロエレクトロニクス

Lifecycle
Active
Stock
5923 個数
Package
TSSOP-16
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

ADS1286UC/2K5

STマイクロエレクトロニクス

Lifecycle
Active
Stock
3452 個数
Package
SOIC-8
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1219IPWR ADS1286UC/2K5 Why it matters
Resolution (bits) 24 12 Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 12-bit device.
Number of input channels 4 (differential/single-ended) 1 (differential) Channel count defines how many signals can be measured without external multiplexing; the ADS1219 supports multi-channel systems directly.
Interface type I2C SPI The digital interface must match the host controller; I2C and SPI are not directly interchangeable without hardware or firmware changes.
Maximum sample rate 1 kSPS 20 kSPS Sample rate sets the bandwidth of signals that can be captured; the ADS1286 supports much faster sampling than the ADS1219.
Supply voltage (analog) 2.7 V to 5.5 V 4.5 V to 5.5 V Supply range determines compatibility with the system power rail; the ADS1219 operates at lower voltages than the ADS1286.
Input type Differential or single-ended Differential Single-ended capability simplifies measurement of ground-referenced signals, while differential-only inputs require appropriate signal conditioning.
Package TSSOP-16 SOIC-8 Package footprint and pin count affect PCB layout and cannot be substituted without board redesign.
Internal PGA / gain stage Yes (programmable gain 1 to 128) No An integrated PGA allows direct amplification of small signals, reducing external components; the ADS1286 requires external gain circuitry.
Operating temperature range -40 °C to +125 °C -40 °C to +85 °C The temperature range determines suitability for harsh or industrial environments; the ADS1219 supports a wider range.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1219IPWR ADS1286UC/2K5
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits 24 12
Sampling Rate(Per Second) 1k 20k
Number of Inputs 4 1
Input Type Differential, Single Ended Differential
Data Interface I²C SPI
Configuration MUX-ADC S/H-ADC
Ratio - S / H: ADC 0:1 1:1
Number of A/D Converters 1 1
Architecture Sigma-Delta SAR
Reference Type External, Internal External
Voltage - Supply, Analog 2.3V ~ 5.5V 5V
Voltage - Supply, Digital 2.3V ~ 5.5V 5V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Features PGA -

Frequently asked questions

What are the key architectural differences between the ADS1219IPWR and the ADS1286UC/2K5?

The ADS1219IPWR is a 24-bit, 4-channel, delta-sigma ADC with an integrated programmable gain amplifier (PGA) and an I2C interface, housed in a TSSOP-16 package. The ADS1286UC/2K5 is a 12-bit, single-channel, successive-approximation register (SAR) ADC with a SPI interface, housed in a SOIC-8 package. The ADS1219IPWR targets high-resolution, multi-channel sensor measurement, while the ADS1286UC/2K5 targets faster, lower-resolution single-channel sampling.

Are the ADS1219IPWR and ADS1286UC/2K5 pin-to-pin or package compatible?

No. The ADS1219IPWR uses a 16-pin TSSOP package, while the ADS1286UC/2K5 uses an 8-pin SOIC package. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements for each other.

How do the resolution and data rate specifications compare?

The ADS1219IPWR provides 24-bit resolution with programmable data rates up to 1 kSPS. The ADS1286UC/2K5 provides 12-bit resolution with a maximum sampling rate of 200 kSPS. The ADS1219IPWR is suited to high-resolution, low-speed measurements, whereas the ADS1286UC/2K5 is suited to lower-resolution, higher-speed sampling.

Do these two ADCs use the same digital communication interface?

No. The ADS1219IPWR uses an I2C interface, while the ADS1286UC/2K5 uses a SPI interface. Firmware and host controller interface logic must be redesigned if migrating between these devices.

How do the input channel configurations differ between the ADS1219IPWR and ADS1286UC/2K5?

The ADS1219IPWR provides four input channels that can be configured as single-ended or differential inputs, with an integrated PGA. The ADS1286UC/2K5 is a single-channel SAR ADC with a pseudo-differential input configuration and no integrated PGA. Multi-channel applications require external multiplexing if using the ADS1286UC/2K5.

What are the supply voltage and reference requirements for each device?

The ADS1219IPWR operates from an analog supply of 2.7 V to 5.5 V and a digital supply of 1.65 V to 5.5 V, with an external reference input. The ADS1286UC/2K5 operates from a single 5 V supply and requires an external reference voltage. Designers must verify reference drive and decoupling requirements against each datasheet.

Can the ADS1219IPWR directly replace the ADS1286UC/2K5 in an existing design?

No. Direct replacement is not possible due to differences in package, pin count, resolution, interface (I2C versus SPI), channel count, and supply requirements. Any migration requires schematic, layout, and firmware changes validated against the respective manufacturer datasheets.