ADS1220IPWR vs ADS1286UC/2K5

ADS1220IPWRとADS1286UC/2K5の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1220IPWR and ADS1286UC/2K5 are not drop-in replacements for one another. The ADS1220IPWR is a 24-bit, 4-channel delta-sigma ADC with an integrated PGA and SPI interface in a TSSOP-16 package, while the ADS1286UC/2K5 is a 12-bit, single-channel successive-approximation ADC with a serial interface in a SOIC-8 package. Their resolution, channel count, conversion architecture, package footprint, and supply requirements differ substantially, so substituting one for the other requires a full schematic and layout redesign rather than a direct swap.

Different resolution Different channel count Different ADC architecture Different package footprint

Parts at a glance

Part A

ADS1220IPWR

STマイクロエレクトロニクス

Lifecycle
Active
Stock
6260 個数
Package
TSSOP-16
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

ADS1286UC/2K5

STマイクロエレクトロニクス

Lifecycle
Active
Stock
3452 個数
Package
SOIC-8
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1220IPWR ADS1286UC/2K5 Why it matters
Resolution (bits) 24 12 Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 12-bit device.
Number of input channels 4 (2 differential / 4 single-ended) 1 (single-ended) Channel count defines how many signals can be measured; multi-channel parts suit multi-sensor systems while single-channel parts suit one-signal designs.
Interface type SPI SPI The digital interface must match the host microcontroller; both use SPI, easing drop-in compatibility at the bus level.
Input type Differential / single-ended Single-ended Differential inputs reject common-mode noise and suit low-level sensor signals, while single-ended inputs are simpler but more noise-sensitive.
Supply voltage (analog) 2.3 V to 5.5 V 4.5 V to 5.5 V Supply range determines compatibility with low-voltage or 5 V systems; the wider range of the ADS1220 allows operation from lower rails.
Package TSSOP-16 SOIC-8 Package footprint and pin count affect PCB layout and board space; these parts are not footprint-compatible.
Internal PGA Yes (gain 1 to 128) No An internal programmable gain amplifier allows direct connection of small sensor signals without external amplification, simplifying the signal chain.
Internal reference Yes No (external reference required) An internal reference reduces external component count and board space; an external reference offers flexibility but adds circuitry.
Operating temperature range -40 °C to +125 °C -40 °C to +85 °C The temperature range defines the environments where the part can reliably operate; the wider range of the ADS1220 suits harsher conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1220IPWR ADS1286UC/2K5
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits 24 12
Sampling Rate(Per Second) 2k 20k
Number of Inputs 2, 4 1
Input Type Differential, Single Ended Differential
Data Interface SPI SPI
Configuration MUX-PGA-ADC S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters 1 1
Architecture Sigma-Delta SAR
Reference Type External, Internal, Supply External
Voltage - Supply, Analog 2.3V ~ 5.5V, ±2.5 5V
Voltage - Supply, Digital 2.3V ~ 5.5V 5V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Features PGA, Temperature Sensor -

Frequently asked questions

What are the key architectural differences between the ADS1220IPWR and the ADS1286UC/2K5?

The ADS1220IPWR is a 24-bit, 4-channel, delta-sigma ADC with an integrated programmable gain amplifier (PGA), internal voltage reference, and SPI interface, housed in a TSSOP-16 package. The ADS1286UC/2K5 is a 12-bit, single-channel, successive-approximation register (SAR) ADC with a pseudo-differential input, external reference requirement, and SPI interface, housed in a SOIC-8 package. The ADS1220 targets high-resolution sensor measurement, while the ADS1286 targets faster, lower-resolution sampling applications.

Do the ADS1220IPWR and ADS1286UC/2K5 have the same resolution and sample rate?

No. The ADS1220IPWR provides 24-bit resolution with programmable data rates up to 2 kSPS (in normal mode). The ADS1286UC/2K5 provides 12-bit resolution with a maximum sampling rate of 20 kSPS. These differing resolution and throughput specifications make them suited to different measurement classes.

Can the ADS1220IPWR and ADS1286UC/2K5 be used interchangeably on the same PCB?

No. The two devices differ in package (TSSOP-16 vs SOIC-8), pin count, pin functions, supply requirements, and external component needs (the ADS1220IPWR integrates a PGA and reference, while the ADS1286UC/2K5 requires an external reference). A direct drop-in replacement is not possible without a redesign of the PCB and signal chain.

What are the supply voltage requirements for each device?

The ADS1220IPWR operates from an analog supply (AVDD) of 2.3 V to 5.5 V and a digital supply (DVDD) of 2.3 V to 5.5 V. The ADS1286UC/2K5 operates from a single 5 V supply (4.5 V to 5.5 V typical per datasheet). Designs must account for these differences when selecting a replacement or shared supply rail.

Which device is better suited for high-resolution sensor measurement such as thermocouples or RTDs?

The ADS1220IPWR is better suited for high-resolution sensor measurement because it offers 24-bit resolution, an integrated PGA for small-signal amplification, and an internal reference, which simplifies thermocouple, RTD, and bridge sensor interfaces. The ADS1286UC/2K5, with 12-bit resolution and no integrated PGA, is more appropriate for lower-resolution, higher-speed monitoring tasks.

Do both devices support the SPI interface?

Yes. Both the ADS1220IPWR and the ADS1286UC/2K5 provide an SPI-compatible serial interface for communication with a host microcontroller. However, the command sets, register maps, and data frame formats differ between the two devices, so firmware must be rewritten when migrating between them.

What are the package and operating temperature considerations for these two ADCs?

The ADS1220IPWR is supplied in a TSSOP-16 package and is specified for operation over the –40 °C to +125 °C temperature range. The ADS1286UC/2K5 is supplied in an SOIC-8 package and is specified over the –40 °C to +85 °C temperature range. The differing package footprints and temperature grades must be evaluated against the target application's thermal and assembly requirements.