ADS1231IDR
STマイクロエレクトロニクス
- Lifecycle
- Active
- Stock
- 4314 個数
- Package
- SOIC-16
- Series
- データ取得 - アナログ/デジタルコンバータ (ADC)
ADS1231IDRとADS1286UCG4の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADS1231IDR and ADS1286UCG4 are not drop-in replacements for one another. The ADS1231IDR is a 24-bit low-noise bridge sensor ADC with an integrated PGA and on-chip oscillator, while the ADS1286UCG4 is a 12-bit successive-approximation ADC with a differential input and serial interface. They differ in resolution, architecture, input configuration, and package, so a direct substitution is not feasible without redesign.
STマイクロエレクトロニクス
STマイクロエレクトロニクス
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1231IDR | ADS1286UCG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 12 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 12-bit device. |
| Number of input channels | 1 (differential) | 1 (differential) | Both are single-channel differential devices, so channel count is not a differentiator for substitutability. |
| Interface type | Serial (SPI-compatible, 2-wire) | Serial (SPI-compatible) | The digital interface must match the host controller; both use serial interfaces but with differing protocol details that affect firmware compatibility. |
| Supply voltage (analog) | 2.7 V to 5.3 V | 4.5 V to 5.5 V | The analog supply range determines compatibility with the system power rail; the ADS1231 supports lower-voltage rails than the ADS1286. |
| Input type / architecture | Delta-sigma with integrated PGA | SAR (successive approximation) | Delta-sigma converters excel at low-speed high-resolution measurements, while SAR converters offer faster sampling; architecture affects noise, speed, and application fit. |
| Data rate / sampling rate | 10 SPS or 80 SPS (selectable) | Up to 20 kSPS | Sampling rate determines how fast the system can capture changing signals; the SAR device is far faster while the delta-sigma device targets slow precision measurements. |
| Package type | SOIC-8 (8-pin) | VSSOP-8 / MSOP-8 | Package footprint and pinout must match the PCB layout for a drop-in replacement; differing packages require layout changes. |
| Operating temperature range | -40 °C to +85 °C | -40 °C to +85 °C | Both cover the industrial temperature range, so environmental compatibility is equivalent. |
| Integrated PGA / gain stage | Yes (gain 128) | No | An integrated PGA allows direct connection of low-level sensors without external amplification, simplifying the signal chain for the ADS1231. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1231IDR | ADS1286UCG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 24 | 12 |
| Sampling Rate(Per Second) | 80 | 20k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | ADC | S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 3V ~ 5.3V | 5V |
| Voltage - Supply, Digital | 3V ~ 5.3V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS1231IDR is a 24-bit delta-sigma analog-to-digital converter with an integrated low-noise programmable gain amplifier (PGA) and a bridge excitation voltage, designed primarily for weigh-scale and strain-gauge applications. The ADS1286UCG4 is a 12-bit successive-approximation-register (SAR) ADC with a pseudo-differential input and an SPI-compatible serial interface, intended for general-purpose medium-speed data acquisition. They differ fundamentally in resolution architecture (delta-sigma vs SAR), resolution (24-bit vs 12-bit), and integration level.
No. The ADS1231IDR is supplied in an 8-pin SOIC (D) package, while the ADS1286UCG4 is supplied in a 10-pin VSSOP (DGS) package. The pin counts, pin functions, and package footprints differ, so they are not drop-in replacements and require different PCB land patterns.
The ADS1231IDR operates from a single analog supply (AVDD) of 2.7 V to 5.3 V and a digital supply (DVDD) of 2.7 V to 5.3 V. The ADS1286UCG4 operates from a single supply of 2.7 V to 5.25 V. Both are low-voltage single-supply devices, but the exact specified ranges differ slightly and should be verified against the respective datasheets.
The ADS1231IDR provides a fully differential input with an integrated PGA (gain of 128) and a dedicated bridge excitation output, and it uses a simple two-wire serial interface for data readout. The ADS1286UCG4 provides a pseudo-differential input without an integrated PGA and uses a standard SPI-compatible serial interface (CS, SCLK, DOUT). The ADS1231IDR is optimized for direct sensor connection, whereas the ADS1286UCG4 requires external signal conditioning for low-level sensors.
The ADS1231IDR is specifically designed for weigh-scale and strain-gauge applications because it integrates a low-noise PGA, a 24-bit delta-sigma modulator, and a bridge excitation voltage source in a single package. The ADS1286UCG4, being a 12-bit SAR ADC without an integrated PGA or excitation source, would require external amplification and excitation circuitry and would provide lower resolution, making it less suitable for high-precision bridge sensor applications.
The ADS1231IDR provides a selectable output data rate of 10 SPS or 80 SPS. The ADS1286UCG4 is a SAR converter whose throughput is determined by the external serial clock; its maximum sampling rate is specified in its datasheet (typically up to 200 kSPS depending on SCLK). The ADS1231IDR is therefore intended for low-speed, high-resolution measurements, while the ADS1286UCG4 supports much higher sample rates at lower resolution.
No. Because they differ in resolution architecture (24-bit delta-sigma vs 12-bit SAR), package (8-pin SOIC vs 10-pin VSSOP), interface protocol, input configuration, and integration level (integrated PGA and excitation vs none), they cannot be used interchangeably without a complete redesign of the analog front end, PCB layout, and firmware.