ADS1259IPWR vs ADS1208IPWRG4

ADS1259IPWRとADS1208IPWRG4の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1259IPWR and ADS1208IPWRG4 are not drop-in replacements for each other. The ADS1259IPWR is a 24-bit delta-sigma ADC with an SPI interface in a TSSOP-20 package, while the ADS1208IPWRG4 is a 16-bit delta-sigma modulator with a serial CMOS output in a TSSOP-16 package. Their differing resolution, output interface, channel configuration, and package footprint require full design validation before any substitution can be considered.

Different output interface Different resolution Different channel configuration Different package footprint

Parts at a glance

Part A

ADS1259IPWR

STマイクロエレクトロニクス

Lifecycle
Active
Stock
6414 個数
Package
TSSOP-20
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

ADS1208IPWRG4

STマイクロエレクトロニクス

Lifecycle
Active
Stock
4872 個数
Package
TSSOP-16
Series
データ取得 - ADC/DAC - 特殊用途向け

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1259IPWR ADS1208IPWRG4 Why it matters
Resolution (bits) 24 16 Resolution determines the smallest signal change the ADC can distinguish; a 24-bit converter offers far finer measurement granularity than a 16-bit one.
Architecture Delta-Sigma (Delta-Sigma) Delta-Sigma (Delta-Sigma) Both use delta-sigma modulation, which provides high resolution and low noise for precision measurement applications.
Number of Input Channels 1 (single-ended/differential) 1 (differential) Channel count and input configuration determine how many signals can be measured and whether differential sensing is supported.
Sampling Rate (max) 14 kSPS 10 kSPS Maximum sample rate sets the bandwidth of signals the converter can capture; higher rates suit faster-changing inputs.
Interface SPI SPI The digital interface must match the host controller; both use SPI, simplifying drop-in compatibility at the system level.
Supply Voltage 5 V (analog), 2.7–5.25 V (digital) 5 V (analog), 2.7–5.5 V (digital) Supply voltage compatibility ensures the part operates correctly within the system's power rails.
Package / Mounting TSSOP-20 (surface mount) TSSOP-16 (surface mount) Package footprint and pin count affect PCB layout and whether the parts are physically interchangeable.
Operating Temperature Range -40°C to +105°C -40°C to +85°C The temperature range defines the environments in which the device can reliably operate.
Input Type Differential / single-ended Differential Input configuration affects noise immunity and how sensor signals are wired to the converter.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1259IPWR ADS1208IPWRG4
Supplier - Texas Instruments
Part Status Active Obsolete
Type - Modulator
Number of Channels - 1
Resolution(Bits) - 16 b
Sampling Rate(Per Second) 14k 40k
Data Interface SPI Serial
Voltage Supply Source - Analog and Digital
Voltage - Supply - 2.7V ~ 5.5V, 4.5V ~ 5.5V
Operating Temperature -40°C ~ 105°C -40°C ~ 85°C
Mounting Type - Surface Mount
Number of Bits 24 -
Number of Inputs 1 -
Input Type Differential, Single Ended -
Configuration ADC -
Number of A/D Converters 1 -
Architecture Sigma-Delta -
Reference Type External -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 2.7V ~ 5.25V -
Features PGA -

Frequently asked questions

What are the primary functional differences between the ADS1259IPWR and ADS1208IPWRG4?

The ADS1259IPWR is a 24-bit, 14.4-kSPS delta-sigma analog-to-digital converter with an integrated low-noise programmable gain amplifier, designed for high-resolution DC and low-frequency measurement. The ADS1208IPWRG4 is a 16-bit, 10-MHz second-order delta-sigma modulator with an integrated driver for current measurement via shunt resistors, intended for isolated and motor-control applications. They differ fundamentally in resolution, output format (digital filter output vs. modulator bitstream), and target application.

Are the ADS1259IPWR and ADS1208IPWRG4 pin-to-pin compatible?

No. Both devices are offered in a TSSOP-20 package (PW suffix), but their pin functions and internal architectures differ. The ADS1259IPWR provides a complete ADC with SPI interface, reference inputs, and PGA, while the ADS1208IPWRG4 provides a modulator output (MDAT/MCLK) with driver and shunt-related pins. Pin assignments are not interchangeable, and PCB layouts must be designed separately for each device.

Can the ADS1259IPWR directly replace the ADS1208IPWRG4 in an existing design?

No. The ADS1259IPWR outputs parallel digital conversion results via an SPI-compatible interface, whereas the ADS1208IPWRG4 outputs a 1-bit modulator data stream requiring an external digital filter (e.g., sinc filter) to reconstruct the conversion result. The signal chain, clocking, and host interface are different, so a direct drop-in replacement is not possible without redesign.

What are the resolution and data-rate specifications of each device?

The ADS1259IPWR provides 24-bit resolution with a maximum data rate of 14.4 kSPS. The ADS1208IPWRG4 provides 16-bit resolution with a modulator clock up to 10 MHz, yielding an oversampled 1-bit output stream that is filtered externally to achieve the effective 16-bit result. The two devices are not directly comparable on a single resolution/data-rate metric because their output formats differ.

Which device is better suited for isolated current sensing in motor control?

The ADS1208IPWRG4 is specifically designed for current measurement using shunt resistors, with an integrated driver and a modulator output that can be galvanically isolated via a digital isolator before filtering. The ADS1259IPWR is a general-purpose high-resolution ADC without an integrated shunt driver or modulator output, making it less suitable for isolated current-sense signal chains. Selection should be validated against the specific isolation and accuracy requirements.

Do both devices support the same supply voltage ranges?

No. The ADS1259IPWR operates from an analog supply (AVDD) of 4.75 V to 5.25 V and a digital supply (DVDD) of 2.7 V to 5.25 V. The ADS1208IPWRG4 operates from a single 5 V supply (4.5 V to 5.5 V) for its analog and digital functions. Power-supply design and decoupling must be tailored to each device's datasheet requirements.

What interface does each device provide to a host microcontroller?

The ADS1259IPWR provides an SPI-compatible serial interface for configuration and reading conversion results. The ADS1208IPWRG4 provides a modulator data output (MDAT) and modulator clock (MCLK) interface, which requires an external digital filter (typically implemented in an FPGA, MCU, or dedicated sinc filter) to produce numeric conversion results. The host interface architectures are therefore fundamentally different.