ADS7809UB
STマイクロエレクトロニクス
- Lifecycle
- Active
- Stock
- 4394 個数
- Package
- SOIC-20
- Series
- データ取得 - アナログ/デジタルコンバータ (ADC)
ADS7809UBとADS7804UB/1Kの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADS7804UB/1K is a strong functional replacement candidate for the ADS7809UB, sharing the same 12-bit SAR architecture, 5 V supply, and 28-pin SOIC footprint. Designers should validate the serial interface configuration and confirm timing margins against the ADS7809UB's faster throughput before committing to production.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7809UB | ADS7804UB/1K | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 12 bit | Resolution determines the smallest signal change the ADC can distinguish; a 16-bit part offers 16x finer quantization than a 12-bit part, so they are not functionally interchangeable in precision applications. |
| Sampling Rate | 100 kSPS | 100 kSPS | Throughput must meet the system's acquisition bandwidth; both parts share the same 100 kSPS maximum, so timing budgets are compatible. |
| Input Type | Single-ended | Single-ended | Input configuration must match the sensor or signal chain topology; both accept single-ended inputs, simplifying direct substitution at the analog front end. |
| Supply Voltage | 5 V | 5 V | Supply compatibility ensures the part can drop into an existing rail without level shifting or additional regulation. |
| Interface | Parallel | Parallel | The digital interface must match the host controller's bus; both use a parallel interface, so board-level wiring and firmware access patterns remain compatible. |
| INL (Integral Nonlinearity) | ±2 LSB (max) | ±0.5 LSB (max) | INL defines deviation from an ideal transfer function; the tighter INL spec of the 12-bit part reflects its lower resolution, and the absolute accuracy achievable differs significantly between the two. |
| Package | 28-SOIC | 28-SOIC | Package and pinout must match for a physical drop-in replacement; both are 28-pin SOIC, allowing the same footprint on the PCB. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | The temperature range must cover the application environment; identical industrial ranges mean both parts suit the same operating conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7809UB | ADS7804UB/1K |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 12 |
| Sampling Rate(Per Second) | 100k | 100k |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS7809UB is a 16-bit successive-approximation analog-to-digital converter, while the ADS7804UB/1K is a 12-bit successive-approximation ADC. Both are pin-compatible members of the Burr-Brown (Texas Instruments) ADS780x family, but they differ in resolution, conversion time, and specified performance grades. The ADS7809UB offers 16-bit resolution with a 10 µs max conversion time, whereas the ADS7804UB provides 12-bit resolution with a 10 µs max conversion time. The "/1K" suffix on the ADS7804UB/1K denotes a tape-and-reel packaging quantity of 1,000 units.
Yes. Both devices are members of the ADS780x family and share the same 28-pin package pinout, allowing them to be used in the same PCB footprint. However, because they differ in resolution and internal architecture, designers must verify that the system timing, digital interface, and accuracy requirements are satisfied when substituting one for the other.
The ADS7809UB provides 16-bit resolution with a maximum conversion time of 10 µs. The ADS7804UB/1K provides 12-bit resolution with a maximum conversion time of 10 µs. Both are successive-approximation register (SAR) ADCs with a parallel digital output interface.
The "UB" suffix designates the industrial temperature range grade (−40°C to +85°C) in the specified package. The ADS7809UB and ADS7804UB/1K are both specified over the industrial temperature range. Designers should consult the respective datasheets for the exact grade-specific accuracy, linearity, and temperature specifications.
The "/1K" suffix indicates tape-and-reel packaging with a quantity of 1,000 units per reel. It does not change the electrical or functional specifications of the ADS7804UB device; it is purely a packaging and ordering designation.
Because both devices are pin-compatible, the ADS7804UB/1K can be physically placed in the same socket. However, it is not a functional drop-in replacement: the ADS7804UB provides 12-bit resolution versus 16-bit for the ADS7809UB, so system accuracy and data format expectations must be revalidated. The digital interface timing and control signals should also be checked against the ADS7804 datasheet before substitution.
Both the ADS7809UB and ADS7804UB/1K are suited for industrial process control, data acquisition systems, medical instrumentation, and test equipment where a parallel-interface SAR ADC with a 10 µs conversion time is required. The ADS7809UB is preferred where 16-bit resolution is needed, while the ADS7804UB/1K is appropriate for 12-bit applications.