ADS7822U vs ADS7800KU/1K

ADS7822UとADS7800KU/1Kの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7822U and ADS7800KU/1K are not drop-in replacements for one another. The ADS7822U is a micropower 12-bit SAR ADC in an SOIC-8 package with a serial SPI interface, while the ADS7800KU/1K is a 12-bit successive-approximation ADC in a 24-pin package with a parallel interface and a wider input voltage range. Designers must account for differences in package footprint, digital interface, supply voltage, and power consumption before considering substitution.

Different package footprint Different digital interface Different supply voltage Different power consumption

Parts at a glance

Part A

ADS7822U

STマイクロエレクトロニクス

Lifecycle
Active
Stock
7079 個数
Package
SOIC-8
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

ADS7800KU/1K

STマイクロエレクトロニクス

Lifecycle
Active
Stock
780 個数
Package
SOIC-24
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7822U ADS7800KU/1K Why it matters
Resolution 12 bit 12 bit Both are 12-bit ADCs, so nominal quantization resolution is equivalent for substitutability.
Sampling Rate 75 kSPS 333 kSPS The ADS7800KU/1K supports a much higher throughput, which matters for faster signal acquisition requirements.
Input Type Single-ended Single-ended Both accept single-ended analog inputs, simplifying direct signal-chain substitution.
Interface SPI / Serial Parallel The digital interface differs fundamentally; SPI versus parallel affects microcontroller pin count and firmware design.
Supply Voltage 2.7 V to 5.25 V 5 V (single supply) The ADS7822U operates over a wider low-voltage range, while the ADS7800KU/1K requires a 5 V supply.
Package SOIC-8 SOIC-28 Different package footprints and pin counts prevent direct board-level drop-in replacement.
Reference External Internal The ADS7800KU/1K includes an internal reference, while the ADS7822U requires an external reference, affecting system design.
Power Consumption Low power (approx. 1.6 mW at 5 V) Higher power (approx. 100 mW typ.) The ADS7822U is significantly lower power, which matters for battery-powered or thermally constrained designs.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Both share the same industrial temperature range, so environmental compatibility is equivalent.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7822U ADS7800KU/1K
Supplier - Texas Instruments,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 200k 333k
Number of Inputs 1 1
Input Type Pseudo-Differential Single Ended
Data Interface SPI Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External Internal
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 5V, -11.4V ~ 16.5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Series microPOWER™ -

Frequently asked questions

What are the key architectural differences between the ADS7822U and the ADS7800KU/1K?

The ADS7822U is a 12-bit micropower successive-approximation register (SAR) analog-to-digital converter that operates from a single 2.7 V to 5.25 V supply and communicates via a synchronous serial (SPI-compatible) interface. The ADS7800KU/1K is a 12-bit SAR ADC that operates from a ±5 V dual supply (or 5 V single supply depending on configuration) and provides a parallel 12-bit output interface. The ADS7822U is optimized for low power and small footprint, while the ADS7800KU/1K targets higher throughput with parallel data access.

How do the sampling rates of the ADS7822U and ADS7800KU/1K compare?

The ADS7822U offers a maximum sampling rate of 75 kSPS. The ADS7800KU/1K provides a maximum throughput of 333 kSPS. The ADS7800KU/1K therefore supports roughly four times the throughput of the ADS7822U, which is relevant when selecting between serial low-power operation and parallel higher-speed acquisition.

Do the ADS7822U and ADS7800KU/1K use the same digital interface?

No. The ADS7822U uses a synchronous serial interface (SPI/QSPI/MICROWIRE-compatible) with a serial data output, making it suitable for systems with limited pin count. The ADS7800KU/1K provides a parallel 12-bit output with associated control signals (such as CS, R/C, and BUSY), which requires more I/O pins but allows direct connection to parallel buses and higher effective data transfer rates.

What are the supply voltage and power consumption differences between these two ADCs?

The ADS7822U operates from a single supply of 2.7 V to 5.25 V and is specified for micropower operation, with typical supply current in the low hundreds of microamperes at lower sample rates. The ADS7800KU/1K operates from ±5 V supplies (or a 5 V single supply in some configurations) and consumes significantly more power, consistent with its higher throughput and parallel interface. The ADS7822U is therefore preferable for battery-powered or power-sensitive designs.

Are the ADS7822U and ADS7800KU/1K available in compatible packages?

The ADS7822U is offered in an 8-pin SOIC (U package designation) among other options. The ADS7800KU/1K is offered in a 24-pin package (such as a 24-pin SOIC or DIP depending on the specific ordering variant). Because the pin counts and pin functions differ substantially, the two devices are not pin-compatible and cannot be dropped into the same PCB land pattern without redesign.

Can the ADS7822U directly replace the ADS7800KU/1K in an existing design?

No. The two devices differ in package pin count, supply requirements, digital interface (serial versus parallel), and throughput. A direct drop-in replacement is not possible. Any substitution requires PCB redesign, interface logic changes, and validation against the target system's timing and power requirements using the respective manufacturer datasheets.

Which device is better suited for low-power portable applications?

The ADS7822U is better suited for low-power portable applications because it operates from a single 2.7 V to 5.25 V supply with micropower consumption and uses a compact serial interface that reduces pin count and board space. The ADS7800KU/1K, with its dual-supply operation and parallel interface, is more appropriate for higher-throughput systems where power and pin count are less constrained.

What input voltage range does each converter support?

The ADS7822U is a unipolar device with a pseudo-differential input and a specified input range of 0 V to VREF (with VREF typically up to the supply voltage). The ADS7800KU/1K supports a bipolar input range of ±10 V (and ±5 V depending on the input range configuration) when operated from ±5 V supplies. Designs requiring bipolar signal acquisition should account for this difference when comparing the two parts.