ADS7843E/2K5 vs ADS7842EB

ADS7843E/2K5とADS7842EBの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E/2K5 and ADS7842EB are not drop-in replacements for one another. The ADS7843E/2K5 is a 4-wire resistive touch screen controller with an SPI-compatible serial interface, while the ADS7842EB is a 4-channel 12-bit parallel-output successive-approximation ADC. Their differing interface architecture, channel configuration, package footprint, and control signaling make direct substitution impractical without a full board and firmware redesign.

Different output interface Different channel configuration Different package footprint Different control signaling

Parts at a glance

Part A

ADS7843E/2K5

STマイクロエレクトロニクス

Lifecycle
Active
Stock
2859 個数
Package
SSOP-16
Series
データ取得 - タッチスクリーンコントローラ
Part B

ADS7842EB

バーブラウン

Lifecycle
Active
Stock
8281 個数
Package
SSOP-28
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E/2K5 ADS7842EB Why it matters
Resolution 12 bit 12 bit Both are 12-bit devices, so conversion resolution is equivalent for touch or signal digitization accuracy.
Number of Input Channels 4 (single-ended/differential touch channels) 4 (single-ended) Channel configuration affects whether the part can directly support 4-wire resistive touchscreen X/Y measurement versus general analog input multiplexing.
Interface Type SPI (serial) Parallel The digital interface must match the host microcontroller or processor bus; SPI versus parallel is a major functional substitutability constraint.
Supply Voltage 2.7 V to 5.25 V 5 V (single supply) Operating supply range determines compatibility with the system power rail and logic levels.
Package SSOP-16 SSOP-28 Package footprint and pin count must match the PCB layout for a drop-in replacement.
Primary Application 4-wire resistive touchscreen controller General-purpose 4-channel ADC The intended function differs; one integrates touchscreen control logic while the other is a general ADC, affecting direct substitutability.
Pin Count 16 28 Different pin counts mean the devices are not pin-compatible and cannot be interchanged on the same footprint.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Equivalent temperature ratings mean both suit the same industrial temperature environments.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E/2K5 ADS7842EB
Supplier - Rochester Electronics, LLC
Part Status Active Active
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - Parallel
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Features - Selectable Address
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Touchscreen 4 Wire Resistive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 2.5 µA -
Mounting Type Surface Mount -

Frequently asked questions

Are the ADS7843E/2K5 and ADS7842EB functionally interchangeable?

No. The ADS7843E/2K5 is a 4-wire resistive touch screen controller with a 12-bit SAR ADC and an SPI-compatible serial interface, while the ADS7842EB is a 4-channel, 12-bit parallel-output sampling ADC. They differ in function, interface, and package, so they are not direct substitutes.

What is the resolution and architecture of each device?

Both devices use a 12-bit successive-approximation register (SAR) ADC architecture. The ADS7843E/2K5 provides 12-bit resolution for touch screen coordinate measurement, and the ADS7842EB provides 12-bit resolution across four analog input channels.

How do the digital interfaces of the ADS7843E/2K5 and ADS7842EB differ?

The ADS7843E/2K5 uses an SPI-compatible 3-wire serial interface for communication with a host controller. The ADS7842EB provides a parallel digital output interface, requiring multiple data lines plus control signals, which affects host pin count and PCB routing.

What are the package differences between the ADS7843E/2K5 and ADS7842EB?

The ADS7843E/2K5 is supplied in a TSSOP package, while the ADS7842EB is supplied in an SSOP package. The different package types and pinouts mean the two devices are not footprint-compatible and cannot be dropped into the same PCB land pattern.

What are the typical supply voltage requirements for these devices?

The ADS7843E/2K5 operates from a single supply in the 2.7 V to 5 V range, supporting both 3 V and 5 V systems. The ADS7842EB operates from a single 5 V supply. Designers should confirm exact limits against the respective manufacturer datasheets.

What are the primary application differences between the ADS7843E/2K5 and ADS7842EB?

The ADS7843E/2K5 is intended for 4-wire resistive touch screen digitizer applications, handling pen position and pressure measurement. The ADS7842EB is a general-purpose 4-channel data acquisition ADC suited to multi-channel signal sampling rather than touch screen control.

Can the ADS7842EB be used as a touch screen controller replacement for the ADS7843E/2K5?

No. The ADS7842EB lacks the touch screen drive and switching circuitry and the serial interface of the ADS7843E/2K5, so it cannot directly perform 4-wire resistive touch screen control. Any substitution would require substantial redesign and external circuitry.