ADS7844N vs ADS7841ES/2K5G4

ADS7844NとADS7841ES/2K5G4の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS7841ES/2K5G4 is a functional replacement candidate for the ADS7844N in many 12-bit SAR ADC applications, but it is not a drop-in substitute: the ADS7844N provides four input channels in a 20-pin SSOP package, while the ADS7841ES/2K5G4 offers a single input channel in a 16-pin SOIC package. Designers must verify channel count, package footprint, and control-interface timing against the target board before committing to the substitution.

Channel Count Validation required
Package Type Validation required
Resolution High match
Supply Voltage High match

Parts at a glance

Part A

ADS7844N

STマイクロエレクトロニクス

Lifecycle
Active
Stock
1495 個数
Package
SSOP-20
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

ADS7841ES/2K5G4

STマイクロエレクトロニクス

Lifecycle
Active
Stock
7893 個数
Package
SSOP-16
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7844N ADS7841ES/2K5G4 Why it matters
Number of Input Channels 8 (single-ended) / 4 (differential) 4 (single-ended) / 2 (differential) Determines how many analog signals can be measured; the ADS7844N supports twice as many channels, so it is not a drop-in replacement where 8 channels are required.
Resolution 12 bit 12 bit Both provide 12-bit resolution, so measurement precision is equivalent and substitutable in this respect.
Sampling Rate 200 kSPS 200 kSPS Identical throughput means timing and acquisition budgets remain compatible between the two parts.
Supply Voltage 2.7 V to 5.25 V 2.7 V to 5.25 V Same supply range allows operation from the same rails, simplifying power design and substitution.
Interface SPI / QSPI / Microwire compatible serial SPI / QSPI / Microwire compatible serial Identical serial interface protocol means the same microcontroller firmware and bus wiring can be reused.
Package 20-pin SSOP (DBQ) 16-pin SSOP (DBQ) Different pin counts and footprints mean the PCB layout must change; the parts are not physically interchangeable.
Pin Count 20 16 Pin count affects footprint and routing; a 20-pin device cannot be placed in a 16-pin socket.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Same industrial temperature range ensures equivalent environmental robustness for both parts.
Power Consumption (typical) ~0.9 mW at 5 V, 200 kSPS ~0.9 mW at 5 V, 200 kSPS Comparable power draw means thermal and battery-life budgets are unaffected by substitution.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7844N ADS7841ES/2K5G4
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 200k 200k
Number of Inputs 4, 8 4
Input Type Differential, Single Ended Single Ended
Data Interface SPI SPI
Configuration MUX-S/H-ADC MUX-S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C

Frequently asked questions

What are the key differences between the ADS7844N and the ADS7841ES/2K5G4?

The ADS7844N is an 8-channel, 12-bit successive-approximation ADC with a serial interface, housed in a 20-pin PDIP package. The ADS7841ES/2K5G4 is a 4-channel, 12-bit SAR ADC in a 16-pin QSOP package, supplied in tape-and-reel form. The primary differences are channel count (8 vs. 4), package type (PDIP vs. QSOP), and packaging format (tube vs. tape-and-reel).

Are the ADS7844N and ADS7841ES/2K5G4 pin-compatible?

No. The ADS7844N uses a 20-pin PDIP package, while the ADS7841ES/2K5G4 uses a 16-pin QSOP package. The pin counts and package footprints differ, so they are not pin-compatible and cannot be interchanged on the same PCB land pattern without redesign.

Do both devices share the same resolution and interface type?

Yes. Both are 12-bit successive-approximation ADCs with a serial SPI-compatible interface, operating from a single 2.7 V to 5.25 V supply. Both support single-ended and differential input configurations, though the ADS7844N provides 8 channels versus 4 channels on the ADS7841ES/2K5G4.

Can the ADS7841ES/2K5G4 replace the ADS7844N in an existing design?

Not directly. The ADS7841ES/2K5G4 has only 4 input channels versus 8 on the ADS7844N, and its 16-pin QSOP footprint differs from the 20-pin PDIP of the ADS7844N. A replacement requires verifying channel count requirements, redesigning the PCB land pattern, and validating the serial timing against the target design.

What is the difference in packaging format between the two parts?

The ADS7844N is supplied in a 20-pin PDIP (N) package, typically in tube form for through-hole assembly. The ADS7841ES/2K5G4 is supplied in a 16-pin QSOP (DBQ) package in tape-and-reel format (2K5 suffix indicates 2,500 units per reel), suited to automated surface-mount assembly.

Do both ADCs support the same supply voltage range?

Yes. Both the ADS7844N and ADS7841ES/2K5G4 operate from a single supply of 2.7 V to 5.25 V, per their respective manufacturer datasheets. This allows both to interface with common 3 V and 5 V logic systems, subject to timing and reference configuration validation.

Which device is better suited for high-channel-count multiplexed sensing?

The ADS7844N is better suited for higher channel-count applications because it provides 8 input channels, compared to 4 channels on the ADS7841ES/2K5G4. For designs requiring more than 4 single-ended inputs, the ADS7844N reduces the need for external multiplexing, provided the 20-pin PDIP package fits the assembly process.