ADS7886SBDBVR vs ADS7887SDCKR

ADS7886SBDBVRとADS7887SDCKRの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS7886SBDBVR is a strong functional replacement candidate for the ADS7887SDCKR, sharing identical resolution, SPI interface, and supply voltage range, with only package and shutdown-current differences requiring validation.

Resolution High match
Interface Type High match
Supply Voltage Range High match
Package Type Validation required

Parts at a glance

Part A

ADS7886SBDBVR

STマイクロエレクトロニクス

Lifecycle
Active
Stock
3915 個数
Package
SOT-23-6
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

ADS7887SDCKR

STマイクロエレクトロニクス

Lifecycle
Active
Stock
2563 個数
Package
SOT-SC70-6
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7887SDCKR ADS7886SBDBVR Why it matters
Resolution 10 bit 12 bit Resolution determines the smallest analog voltage change the ADC can distinguish; a 12-bit part offers 4x finer quantization than a 10-bit part, affecting measurement precision.
Sampling Rate 1.25 MSPS 1 MSPS Maximum throughput limits how fast the system can digitize signals; a higher rate supports wider signal bandwidth or faster multiplexed channels.
Input Type Single-ended Pseudo-differential Single-ended inputs measure against ground, while pseudo-differential inputs reject common-mode noise on the reference side, improving accuracy in noisy environments.
Supply Voltage Range 2.35 V to 5.25 V 2.7 V to 5.25 V The minimum supply voltage affects compatibility with low-voltage rails; the wider low-end range of one part allows operation from lower system supplies.
Interface SPI (up to 20 MHz) SPI (up to 20 MHz) Both use a serial SPI-compatible interface, so the digital host connection is functionally interchangeable between the two parts.
Package SOT-23-6 (SC-70) SOT-23-6 Package footprint and pinout determine PCB layout compatibility; matching packages allow drop-in substitution without board redesign.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C The temperature range defines the environments in which the part can reliably operate; identical ranges mean equivalent thermal robustness.
Reference Input External reference (VDD-referenced) External reference (VDD-referenced) The reference architecture sets the full-scale input range and accuracy; both being supply-referenced means similar scaling behavior in the system.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7886SBDBVR ADS7887SDCKR
Series microPOWER™ microPOWER™
Part Status Active Active
Number of Bits 12 10
Sampling Rate(Per Second) 1M 1.25M
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI SPI
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type Supply Supply
Voltage - Supply, Analog 2.35V ~ 5.25V 2.35V ~ 5.25V
Voltage - Supply, Digital 2.35V ~ 5.25V 2.35V ~ 5.25V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C

Frequently asked questions

What are the key differences between the ADS7887SDCKR and ADS7886SBDBVR?

The ADS7887SDCKR is a 10-bit, 1-MSPS SAR ADC in a 6-pin SC70 (DCK) package, while the ADS7886SBDBVR is a 12-bit, 1-MSPS SAR ADC in a 6-pin SOT-23 (DBV) package. Both are single-channel, micro-power ADCs from Texas Instruments with a pseudo-differential input, SPI-compatible serial interface, and 2.35 V to 5.25 V supply range, but they differ in resolution and package type.

Are the ADS7887SDCKR and ADS7886SBDBVR pin-compatible?

No. The ADS7887SDCKR uses the 6-pin SC70 (DCK) package, and the ADS7886SBDBVR uses the 6-pin SOT-23 (DBV) package. Although both are 6-pin devices with similar pin functions (VDD, GND, CS, SCLK, SDO, and analog input), the package footprints and PCB land patterns differ, so they are not drop-in replacements without a board layout change.

Do both devices support the same sampling rate and supply voltage?

Yes. Both the ADS7887SDCKR and ADS7886SBDBVR are specified for a maximum throughput of 1 MSPS and operate from a single supply of 2.35 V to 5.25 V, per the Texas Instruments datasheets. Both also feature a pseudo-differential analog input and an SPI-compatible serial interface.

How does resolution differ between the ADS7887SDCKR and ADS7886SBDBVR?

The ADS7887SDCKR provides 10-bit resolution, while the ADS7886SBDBVR provides 12-bit resolution. This means the ADS7886SBDBVR offers finer quantization (4096 codes versus 1024 codes over the full-scale input range), which can be advantageous in applications requiring higher measurement precision.

Can the ADS7887SDCKR be substituted with the ADS7886SBDBVR in an existing design?

Not as a direct drop-in replacement. Although both share the same 1-MSPS throughput, supply range, and serial interface, the ADS7886SBDBVR has 12-bit resolution versus 10-bit for the ADS7887SDCKR, and it uses a different package (SOT-23 DBV versus SC70 DCK). Substitution requires verifying firmware timing, output data word length, and PCB footprint compatibility against the respective Texas Instruments datasheets.

What is the power consumption of these ADCs?

Both the ADS7887SDCKR and ADS7886SBDBVR are micro-power SAR ADCs designed for low-power operation. According to Texas Instruments datasheets, both devices draw very low supply current at 1 MSPS and support a power-down mode between conversions to further reduce average power consumption. Refer to the respective datasheets for exact current and power figures at specific supply voltages and throughput rates.

What interface do the ADS7887SDCKR and ADS7886SBDBVR use?

Both devices use an SPI-compatible serial interface with chip select (CS), serial clock (SCLK), and serial data output (SDO) pins. This allows direct connection to most microcontrollers, DSPs, and FPGAs without external glue logic, and both support daisy-chain or multi-device configurations on a shared bus.