ADS8345E/2K5 vs ADS830EG4

ADS8345E/2K5とADS830EG4の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS8345E/2K5 and ADS830EG4 are not functionally interchangeable. The ADS8345E/2K5 is a 16-bit, 4-channel successive-approximation ADC with a serial SPI/QSPI interface in a 20-pin SSOP package, while the ADS830EG4 is an 8-bit, single-channel pipelined ADC with a parallel output interface in a 20-pin SOIC package. The differences in resolution, channel count, output interface, and package footprint make direct substitution impractical without a complete redesign of the surrounding circuitry.

Different resolution Different channel count Different output interface Different package footprint

Parts at a glance

Part A

ADS8345E/2K5

STマイクロエレクトロニクス

Lifecycle
Active
Stock
3595 個数
Package
SSOP-20
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

ADS830EG4

STマイクロエレクトロニクス

Lifecycle
Active
Stock
7957 個数
Package
SSOP-20
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS8345E/2K5 ADS830EG4 Why it matters
Resolution 16 bit 8 bit Resolution determines the smallest signal change the ADC can distinguish; a 16-bit part offers far finer quantization than an 8-bit part, so they are not functionally interchangeable in precision applications.
Number of Input Channels 8 single-ended / 4 differential 1 single-ended Channel count defines how many signals can be digitized; the multi-channel ADS8345 suits multiplexed multi-sensor systems, while the single-channel ADS830 targets one high-speed signal path.
Sampling Rate 100 kSPS 60 MSPS Maximum sample rate sets the bandwidth of signals that can be captured; the ADS830 is roughly 600x faster, making it suitable for high-frequency/IF sampling where the ADS8345 cannot be used.
Architecture SAR (successive approximation) Pipeline Converter architecture affects latency, speed, and power trade-offs; SAR offers low latency and low power at moderate speed, while pipeline enables very high throughput at the cost of latency and power.
Interface SPI / serial (QSPI, Microwire, DSP compatible) Parallel (8-bit) The digital interface must match the host controller; a serial SPI device and a parallel-output device require different board routing and firmware, preventing drop-in substitution.
Supply Voltage 2.7 V to 5.25 V (analog and digital) 5 V (single supply) Supply voltage compatibility determines whether the part can operate in a given system rail; the wide-range ADS8345 supports low-voltage designs, whereas the ADS830 requires a 5 V rail.
Input Configuration Single-ended or differential (software selectable) Single-ended Differential inputs improve noise immunity and dynamic range; only the ADS8345 offers this flexibility, which matters for low-level or noisy signal environments.
Package SSOP-20 SOIC-20 Package footprint and pinout must match for board-level interchangeability; different package types require layout changes and cannot be directly swapped.
Typical Power Consumption Low power (approx. 1.5 mW at 100 kSPS, 5 V) Higher power (approx. 190 mW at 60 MSPS, 5 V) Power budget constrains portable and thermally sensitive designs; the low-power SAR part suits battery systems, while the high-speed pipeline part draws substantially more current.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS8345E/2K5 ADS830EG4
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits 16 8
Sampling Rate(Per Second) 100k 60M
Number of Inputs 4, 8 1
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR Pipelined
Reference Type External External, Internal
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the primary differences between the ADS8345E/2K5 and the ADS830EG4?

The ADS8345E/2K5 is a 16-bit, 8-channel successive-approximation register (SAR) analog-to-digital converter with a maximum sampling rate of 100 kSPS, while the ADS830EG4 is an 8-bit, single-channel pipeline ADC with a maximum sampling rate of 60 MSPS. They differ fundamentally in resolution, architecture, channel count, and speed.

What are the supply voltage requirements for each device?

The ADS8345E/2K5 operates from a single 2.7 V to 5.25 V analog and digital supply. The ADS830EG4 requires a 5 V analog supply and a separate 3 V to 5 V digital output supply.

What analog input configurations do these ADCs support?

The ADS8345E/2K5 supports eight single-ended inputs or four differential inputs, selectable via its input multiplexer. The ADS830EG4 provides a single-ended analog input with an internal reference and a flexible input range.

What digital interfaces do the ADS8345E/2K5 and ADS830EG4 use?

The ADS8345E/2K5 uses a serial SPI-compatible interface. The ADS830EG4 provides a parallel CMOS-compatible output bus for its 8-bit conversion results.

Are these two ADCs pin-compatible or footprint-compatible?

No. The ADS8345E/2K5 is supplied in a 20-pin SSOP package, while the ADS830EG4 is supplied in a 20-pin TSSOP package. Pin functions and PCB land patterns differ, so they are not direct drop-in replacements.

What are the typical applications for each converter?

The ADS8345E/2K5 is suited to multi-channel, medium-speed data acquisition such as industrial process control and portable instrumentation. The ADS830EG4 is intended for high-speed, single-channel signal digitization such as video processing, imaging, and communications receivers.

What are the specified operating temperature ranges for these devices?

Both the ADS8345E/2K5 and the ADS830EG4 are specified for the industrial temperature range of -40°C to +85°C.