ADS8556IPM vs ADS8555SPM

ADS8556IPMとADS8555SPMの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS8556IPM and ADS8555SPM are functionally comparable 16-bit, 6-channel simultaneous-sampling SAR ADCs from the same family, sharing a common TQFP-64 footprint and similar digital interface. The ADS8556IPM offers a wider analog supply range and higher per-channel throughput, while the ADS8555SPM provides a higher aggregate sampling rate. Both are viable substitutes in most designs, but the supply-voltage headroom and timing budget should be validated against the target application before substitution.

Resolution and Channel Count High match
Package and Pinout High match
Analog Supply Voltage Range Validation required
Sampling Rate Validation required

Parts at a glance

Part A

ADS8556IPM

STマイクロエレクトロニクス

Lifecycle
Active
Stock
6944 個数
Package
LQFP-64
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

ADS8555SPM

STマイクロエレクトロニクス

Lifecycle
Active
Stock
8068 個数
Package
LQFP-64
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS8556IPM ADS8555SPM Why it matters
Resolution 16 bit 16 bit Both are 16-bit SAR ADCs, so nominal resolution is identical and not a differentiator for substitutability.
Number of Input Channels 6 single-ended / 3 differential 6 single-ended / 3 differential Channel count and configuration must match the system's analog front end for a drop-in replacement.
Sampling Rate (max) 630 kSPS 630 kSPS Maximum throughput determines whether the device meets the timing budget of the application.
Supply Voltage (Analog) 5 V (4.5 V to 5.5 V) 5 V (4.5 V to 5.5 V) Analog supply range must be compatible with the board's power rail to avoid level shifting or damage.
Digital Interface Supply 2.7 V to 5.5 V 2.7 V to 5.5 V The I/O supply must match the host logic level (e.g., 3.3 V or 5 V) for reliable communication.
Interface Type Parallel / Serial (SPI) Parallel / Serial (SPI) The available digital interface must match the host controller's supported bus to allow direct connection.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C The temperature grade must cover the application's environmental conditions for guaranteed performance.
Package 64-LQFP (PM) 64-LQFP (PM) Package and pinout must be identical for a physical drop-in replacement on the PCB.
INL (max) ±1.5 LSB ±1.5 LSB Integral nonlinearity affects absolute accuracy; matching values ensures equivalent measurement fidelity.
Power Consumption (typ) ~250 mW ~250 mW Power draw impacts thermal design and supply sizing; equivalent consumption supports direct substitution.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS8556IPM ADS8555SPM
Supplier - Rochester Electronics, LLC,Texas Instruments
Part Status Active Active
Number of Bits 16 16
Sampling Rate(Per Second) 630k 630k
Number of Inputs 6 6
Input Type Single Ended Single Ended
Data Interface SPI, Parallel SPI, Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Features Simultaneous Sampling Simultaneous Sampling
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C

Frequently asked questions

What are the key differences between the ADS8556IPM and ADS8555SPM?

The ADS8556IPM is a 16-bit, 6-channel simultaneous-sampling SAR ADC, while the ADS8555SPM is a 16-bit, 6-channel simultaneous-sampling SAR ADC with an integrated programmable gain amplifier (PGA) front end. Both are pin-compatible in the same 64-pin LQFP package, but the ADS8555SPM adds per-channel PGA functionality that the ADS8556IPM does not provide.

Do the ADS8556IPM and ADS8555SPM share the same package and pinout?

Yes. Both devices are offered in a 64-pin LQFP (PM) package with the same pinout, which allows board-level compatibility. Designers should still verify the pin functions against the respective datasheets, since the ADS8555SPM uses some pins for PGA-related configuration.

What is the maximum sampling rate of these ADCs?

Both the ADS8556IPM and ADS8555SPM support a maximum throughput of 630 kSPS per channel in parallel interface mode. The actual achievable rate depends on the selected interface mode and configuration.

What analog input voltage range do these devices support?

The ADS8556IPM supports bipolar input ranges of ±10 V, ±5 V, and ±2.5 V (with a 5 V reference). The ADS8555SPM, with its integrated PGA, supports additional programmable gain settings, allowing smaller input signals to be amplified to utilize the full ADC range. Exact ranges should be confirmed in the respective datasheets.

What digital interfaces are available on the ADS8556IPM and ADS8555SPM?

Both devices support parallel and serial interfaces. The parallel interface provides 16-bit word access, while the serial interface supports SPI-compatible communication. Interface selection is configured via dedicated control pins.

What is the analog supply voltage requirement for these ADCs?

Both devices operate from a 5 V analog supply (AVDD) and a separate digital supply (DVDD) that supports 2.7 V to 5.25 V, allowing direct interfacing to lower-voltage logic. Designers should confirm exact supply tolerances in the manufacturer datasheets.

Can the ADS8555SPM be used as a drop-in replacement for the ADS8556IPM?

Because both share the same 64-pin LQFP package and pinout, the ADS8555SPM can be placed on a board designed for the ADS8556IPM. However, the added PGA functionality requires appropriate configuration and may affect input signal conditioning, so the design must be validated against the ADS8555SPM datasheet before substitution.