ADS8568SPM
STマイクロエレクトロニクス
- Lifecycle
- Active
- Stock
- 3952 個数
- Package
- LQFP-64
- Series
- データ取得 - アナログ/デジタルコンバータ (ADC)
ADS8568SPMとADS8548SPMRの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADS8548SPMR is a strong functional replacement candidate for the ADS8568SPM, sharing the same 16-bit SAR architecture, 8-channel simultaneous-sampling configuration, and TQFP-64 footprint. The primary distinction is the parallel interface on the ADS8568SPM versus the serial interface on the ADS8548SPMR, which requires host-side interface redesign but does not affect core conversion performance.
STマイクロエレクトロニクス
シーラス・ロジック社
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8568SPM | ADS8548SPMR | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 14 bit | Resolution determines the smallest measurable signal change; a 16-bit ADC provides finer quantization than a 14-bit device, affecting accuracy and dynamic range. |
| Number of Input Channels | 8 | 8 | Channel count defines how many analog signals can be sampled; both devices offer 8 channels, so channel capacity is not a differentiator. |
| Sampling Rate | 500 kSPS | 500 kSPS | Maximum sampling rate limits the bandwidth of signals that can be digitized; identical rates mean comparable throughput for both parts. |
| Input Type | Single-ended | Single-ended | Input configuration affects signal conditioning and noise immunity; both being single-ended means similar front-end design requirements. |
| Supply Voltage | 5 V (analog), 3.3 V (digital) | 5 V (analog), 3.3 V (digital) | Supply requirements determine power rail compatibility; matching voltages allow the same power design to be reused. |
| Interface | SPI | SPI | The digital interface must match the host controller; both using SPI ensures drop-in compatibility for the communication bus. |
| Package | LQFP-64 | LQFP-64 | Package footprint affects PCB layout and assembly; identical packages allow the same board design to be used. |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | Temperature range determines suitability for harsh environments; matching ranges mean equivalent environmental robustness. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8568SPM | ADS8548SPMR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Active |
| Number of Bits | 16 | 14 |
| Sampling Rate(Per Second) | 500k | 600k |
| Number of Inputs | 8 | 8 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, Parallel | SPI, Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 5.5V | 2.7V ~ 5.5V |
| Features | Simultaneous Sampling | Simultaneous Sampling |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
The ADS8568SPM is an 8-channel, 16-bit simultaneous-sampling SAR ADC, while the ADS8548SPMR is an 8-channel, 14-bit simultaneous-sampling SAR ADC. Both share the same 64-pin LQFP package and similar architecture, but the ADS8568 provides 16-bit resolution versus 14-bit on the ADS8548, and the "R" suffix on the ADS8548SPMR denotes tape-and-reel packaging.
Yes. Both devices are offered in the same 64-pin LQFP (PM) package with the same pinout, allowing a common PCB footprint. However, resolution, performance specifications, and ordering suffix differ, so firmware and accuracy requirements must be validated before substitution.
Both the ADS8568 and ADS8548 support a maximum throughput of 500 kSPS per channel with all eight channels sampling simultaneously, as specified in the Texas Instruments datasheets.
Both devices support bipolar analog input ranges of ±10 V, ±5 V, and ±2.5 V, as well as a unipolar 0 V to 5 V range, configured via the internal reference and input range settings described in the datasheet.
Yes. Both the ADS8568 and ADS8548 integrate an internal reference with a buffered output, and they also support the use of an external reference if higher accuracy or a different reference value is required.
Both devices provide a parallel interface (byte/word mode) as well as a serial interface compatible with SPI, allowing flexible connection to FPGAs, DSPs, and microcontrollers.
These devices are intended for applications requiring simultaneous multi-channel acquisition, such as power quality monitoring, motor control, protective relays, and industrial data acquisition systems, where phase-coherent sampling across eight channels is essential.
Both devices operate from an analog supply of 5 V and a digital supply of 2.7 V to 5.5 V, with the same power dissipation class per the respective datasheets. The primary difference remains resolution (16-bit vs 14-bit) rather than supply architecture.