Part A
ADSP-BF537BBCZ-5A
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 5323 個数
- Package
- BGA
- Series
- 組み込み - DSP（デジタル信号プロセッサ）
Replacement verdict
Compatible functional replacement candidate
The ADSP-BF537BBCZ-5A and ADSP-BF533SBBC500 are both Blackfin fixed-point DSPs sharing the same core architecture and 160-pin BGA footprint, making the ADSP-BF533SBBC500 a viable functional substitute for the ADSP-BF537BBCZ-5A in applications where the additional Ethernet MAC, CAN controller, and higher core clock of the ADSP-BF537BBCZ-5A are not required. Designers should validate clock frequency, on-chip peripheral set, and power supply requirements against the target application before committing to the substitution.
Core Clock Frequency
Validation required
On-Chip Peripherals
Validation required
Package Type
High match
Operating Temperature Range
Validation required
Parts at a glance
Part B
ADSP-BF533SBBC500
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 7216 個数
- Package
- LFBGA-160
- Series
- 組み込み - DSP（デジタル信号プロセッサ）
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADSP-BF537BBCZ-5A | ADSP-BF533SBBC500 | Why it matters |
|---|---|---|---|
| Core Clock Speed (Max) | 500 MHz | 500 MHz | Determines maximum instruction throughput; both run at the same core frequency, so raw processing speed is equivalent. |
| On-Chip SRAM | 132 KB | 148 KB | Larger on-chip memory reduces external memory accesses and latency; the BF533 offers more SRAM for data/code buffering. |
| Ethernet MAC | Yes (10/100) | No | Integrated Ethernet enables networked applications without external controllers; the BF537 supports connectivity natively while the BF533 does not. |
| CAN Controller | Yes | No | On-chip CAN supports industrial/automotive bus networking; only the BF537 provides this interface directly. |
| Package / Pin Count | 182-ball BGA (CSP_BGA) | 160-ball BGA (CSP_BGA) | Different footprints and pinouts prevent direct board-level drop-in replacement; PCB layout must be redesigned. |
| Peripheral Set (PPI/SPORT/SPI/TWI) | PPI, 2x SPORT, SPI, 2x TWI, UART, timers | PPI, 2x SPORT, SPI, TWI, UART, timers | Peripheral mix affects interface compatibility; the BF537 adds a second TWI and CAN/Ethernet, changing system integration options. |
| Operating Temperature Range | -40°C to +85°C (industrial) | -40°C to +85°C (industrial) | Both rated for industrial environments, so thermal suitability is equivalent for harsh-condition deployments. |
| Core Supply Voltage (VDD) | 0.8V to 1.32V (internal) | 0.8V to 1.32V (internal) | Identical core voltage requirements mean power supply design for the core can be reused across both parts. |
| External Memory Interface | SDRAM, async SRAM, flash (EBIU) | SDRAM, async SRAM, flash (EBIU) | Both provide a flexible external bus for memory expansion, supporting similar system memory architectures. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | ADSP-BF537BBCZ-5A | ADSP-BF533SBBC500 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Analog Devices Inc. |
| Series | Blackfin® | Blackfin® |
| Part Status | Active | Obsolete |
| Type | Fixed Point | Fixed Point |
| Interface | CAN, SPI, SSP, TWI, UART | SPI, SSP, UART |
| Clock Rate | 500MHz | 500MHz |
| Non - Volatile Memory | External | ROM (1kB) |
| On - Chip RAM | 132kB | 148kB |
| Voltage - I / O | 2.50V, 3.30V | 3.30V |
| Voltage - Core | 1.26V | 1.20V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
Frequently asked questions
What are the key architectural differences between the ADSP-BF537BBCZ-5A and the ADSP-BF533SBBC500?
The ADSP-BF537BBCZ-5A is a Blackfin processor that includes an integrated Ethernet MAC, CAN 2.0B controller, and a richer peripheral set (including two SPI ports, two UARTs, and TWI), whereas the ADSP-BF533SBBC500 is a Blackfin processor focused on general-purpose signal processing with a more limited peripheral mix (including two SPI ports, two UARTs, and SPORTs) and does not integrate an Ethernet MAC or CAN controller. Both are based on the Blackfin 16/32-bit core, but the BF537 targets connectivity-centric designs while the BF533 targets cost-sensitive signal-processing applications.
What are the maximum core clock frequencies of these two processors?
The ADSP-BF537BBCZ-5A is specified for a 500 MHz core clock (the "5" in the part number denotes 500 MHz), while the ADSP-BF533SBBC500 is also specified for a 500 MHz core clock (the "500" suffix denotes 500 MHz). Both parts therefore share the same maximum core frequency grade.
Do these processors come in the same package and are they pin-compatible?
Both devices are offered in a 208-ball BGA package (the "BBCZ" and "BBC" package designators in the part numbers indicate a 208-ball BGA). However, pin compatibility cannot be assumed: the BF537 and BF533 have different peripheral sets and pin multiplexing, so the ball assignments and functions differ. A direct drop-in replacement is not supported without verifying the pinout against the respective datasheets.
How do the on-chip memory resources compare between the ADSP-BF537BBCZ-5A and ADSP-BF533SBBC500?
Both processors integrate on-chip L1 instruction and data SRAM plus a shared L2 SRAM block. The ADSP-BF537BBCZ-5A provides 132 KB of total on-chip SRAM (including L1 and L2), while the ADSP-BF533SBBC500 provides 148 KB of total on-chip SRAM. Designers should confirm the exact L1/L2 split in the respective datasheets, as the allocation differs between the two parts.
Which external memory interfaces are supported by each device?
Both the ADSP-BF537BBCZ-5A and the ADSP-BF533SBBC500 include an external bus interface unit (EBIU) supporting SDRAM, asynchronous memory (SRAM, Flash, ROM), and a glueless connection to parallel peripherals. The BF537 additionally supports a NAND Flash controller interface, which is not present on the BF533. Both provide a parallel peripheral interface (PPI) for video and data acquisition.
What connectivity peripherals distinguish the ADSP-BF537BBCZ-5A from the ADSP-BF533SBBC500?
The ADSP-BF537BBCZ-5A integrates a 10/100 Ethernet MAC (with RMII/MII interface) and a CAN 2.0B controller, making it suitable for networked and automotive/industrial connectivity applications. The ADSP-BF533SBBC500 does not include an on-chip Ethernet MAC or CAN controller; it provides SPORTs, SPI, UARTs, and a PPI for signal-processing-oriented I/O. This is the primary functional differentiator between the two parts.
Are the two processors interchangeable in an existing design?
No. Although both are 500 MHz Blackfin processors in 208-ball BGA packages, they differ in peripheral set (Ethernet MAC and CAN on the BF537 only), on-chip SRAM size, pin multiplexing, and NAND Flash support. A design targeting one part cannot be directly reworked to the other without schematic, PCB, and firmware changes validated against the respective manufacturer datasheets.
What are the typical target applications for each processor?
The ADSP-BF537BBCZ-5A is typically used in networked embedded systems such as industrial automation, IP cameras, VoIP, and automotive telematics where integrated Ethernet and CAN are advantageous. The ADSP-BF533SBBC500 is typically used in cost-sensitive signal-processing applications such as audio processing, portable media, biometrics, and general embedded control where the additional connectivity peripherals are not required.