AFE5832ZBV vs AFE5832LPZAV

AFE5832ZBVとAFE5832LPZAVの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AFE5832LPZAV and AFE5832ZBV are functionally compatible ultrasound analog front-end devices sharing the same channel count, package footprint, and core architecture, making them viable candidates for substitution. However, the LP variant introduces a low-power operating mode that reduces power consumption at the expense of certain performance parameters, so designers must validate signal-chain performance and power budget requirements against the target application before finalizing the replacement.

Channel Count High match
Package Type High match
Power Consumption Validation required
Signal-to-Noise Performance Validation required

Parts at a glance

Part A

AFE5832ZBV

STマイクロエレクトロニクス

Lifecycle
Active
Stock
2381 個数
Package
FBGA-289
Series
データ取得 - アナログフロントエンド (AFE)
Part B

AFE5832LPZAV

STマイクロエレクトロニクス

Lifecycle
Active
Stock
6726 個数
Package
NFBGA-289
Series
データ取得 - アナログフロントエンド (AFE)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AFE5832LPZAV AFE5832ZBV Why it matters
Package / Case 100-TQFP (14x14) 289-NFBGA (15x15) Footprint and PCB layout differ, so the two parts are not drop-in board-level replacements.
Number of Channels 32 32 Channel count defines the ultrasound front-end capacity; both provide 32 receive channels.
ADC Resolution 12 bit 12 bit Resolution sets the dynamic range and quantization noise of the digitized echo signal.
Maximum Sample Rate 80 MSPS 80 MSPS Sample rate determines the achievable imaging depth and axial resolution.
Supply Voltage (Analog) 1.8 V / 3.3 V 1.8 V / 3.3 V Supply rails must match the board power design for correct biasing and signal swing.
Interface LVDS LVDS The digital output interface must be compatible with the downstream FPGA/ASIC receiver.
Operating Temperature Range 0°C to 70°C 0°C to 70°C Thermal range affects suitability for commercial versus harsher environments.
Pin Count 100 289 Different pin counts confirm the packages are physically incompatible and require different PCB footprints.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AFE5832ZBV AFE5832LPZAV
Supplier Texas Instruments -
Part Status Active Active
Number of Bits 12 10, 12
Number of Channels 32 32
Power (Watts) 42 mW -
Voltage - Supply, Analog 3V ~ 3.3V -
Voltage - Supply, Digital 3V ~ 3.3V -
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the AFE5832LPZAV and AFE5832ZBV?

Both are Texas Instruments AFE5832 family fully integrated analog front ends (AFEs) for ultrasound imaging, integrating a multichannel low-noise amplifier (LNA), variable-gain amplifier (VGA), anti-aliasing filter, and 12-bit analog-to-digital converter (ADC) with digital time-gain compensation and continuous-wave (CW) Doppler processing. The AFE5832LPZAV is the low-power variant, while the AFE5832ZBV is the standard-power variant of the same AFE5832 platform.

What is the key difference between the AFE5832LPZAV and AFE5832ZBV?

The primary difference is power consumption versus performance: the AFE5832LPZAV ("LP" suffix) is specified for reduced power operation, while the AFE5832ZBV is the standard-power device. Designers should confirm the exact per-channel power and noise specifications in the respective TI datasheets before selecting between them.

Are the AFE5832LPZAV and AFE5832ZBV pin-to-pin and package compatible?

Both devices are offered in the same ZAV package family (a BGA-type package) within the AFE5832 platform, so they share a common package and pinout. However, because the LP and standard variants differ in power/performance specifications, a direct drop-in substitution should only be made after verifying supply, timing, and thermal requirements against the TI datasheets.

How many channels and what ADC resolution do these AFEs provide?

The AFE5832 family integrates 32 channels of LNA, VGA, and anti-aliasing filter feeding 12-bit ADCs, with on-chip CW Doppler mixers and digital processing. Both the AFE5832LPZAV and AFE5832ZBV share this 32-channel, 12-bit architecture.

Can the AFE5832LPZAV and AFE5832ZBV be used interchangeably in an existing ultrasound design?

They are functionally similar members of the same AFE5832 platform, but the low-power (LP) and standard variants have different power and potentially different noise/performance specifications. Interchangeability must be validated against the target design's power budget, thermal limits, and image-quality requirements using the official TI datasheets.

What applications are the AFE5832LPZAV and AFE5832ZBV intended for?

Both devices target medical ultrasound imaging systems, including portable and cart-based scanners, where multichannel receive signal chains with integrated CW Doppler are required. The LP variant is oriented toward power-sensitive portable systems, while the standard variant suits applications prioritizing performance over power.

Where can verified specifications for the AFE5832LPZAV and AFE5832ZBV be obtained?

Authoritative parameters should be taken from the official Texas Instruments product datasheets and product pages for each orderable part number, and cross-checked against distributor listings such as DigiKey, Mouser, or TTI. Always confirm the exact orderable part number, package designator, and revision before design release.