AM26C31IDR vs AM26C31IDG4

AM26C31IDRとAM26C31IDG4の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26C31IDR and AM26C31IDG4 are functionally equivalent quad differential line drivers from the same manufacturer, sharing identical electrical specifications, logic function, and package footprint. The only distinction is the ordering suffix denoting packaging format (tape-and-reel versus tube/rail), making them interchangeable for design and production purposes provided the assembly process accommodates the respective packaging.

Function and Logic Family High match
Package Type and Pinout High match
Electrical Specifications High match
Packaging Format Validation required

Parts at a glance

Part A

AM26C31IDR

STマイクロエレクトロニクス

Lifecycle
Active
Stock
2239 個数
Package
SOIC-16
Series
インターフェース - ドライバ、レシーバ、トランシーバ
Part B

AM26C31IDG4

STマイクロエレクトロニクス

Lifecycle
Active
Stock
9629 個数
Package
SOIC-16
Series
インターフェース - ドライバ、レシーバ、トランシーバ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26C31IDR AM26C31IDG4 Why it matters
Function Quadruple differential line driver Quadruple differential line driver Both parts perform the same core function, so they are functionally interchangeable in the circuit.
Number of Drivers 4 4 The driver count must match the number of differential lines the design needs to drive.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V The operating supply range determines compatibility with the system power rail.
Output Type Differential (3-state) Differential (3-state) Three-state differential outputs allow bus sharing and match the signaling standard required by the interface.
Data Rate Up to 10 Mbps Up to 10 Mbps The maximum data rate must meet or exceed the signaling speed of the application.
Package / Mounting SOIC-16, surface mount SOIC-16, surface mount Package and mounting style must match the PCB footprint and assembly process.
Operating Temperature Range -40 °C to 85 °C -40 °C to 85 °C The temperature range must cover the environmental conditions of the target application.
RoHS Compliance RoHS compliant RoHS compliant Compliance affects regulatory acceptance and environmental requirements for the finished product.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26C31IDR AM26C31IDG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Driver Driver
Number of Drivers/Receivers 4/0 4/0
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the difference between the AM26C31IDR and the AM26C31IDG4?

Both devices are functionally identical quad differential line drivers from Texas Instruments. The AM26C31IDR is supplied in a 16-pin SOIC package on a standard 330 mm reel, while the AM26C31IDG4 is the same die and package supplied in a Green (RoHS-compliant, Pb-free) qualified version. The "G4" suffix denotes TI's Green material set; electrical performance and pinout are unchanged.

Are the AM26C31IDR and AM26C31IDG4 electrically interchangeable?

Yes. Both parts share the same datasheet parameters: quad 3-state differential line drivers, 5 V nominal supply, TIA/EIA-422-B and ITU-T V.11 compatible outputs, and identical propagation delays and output drive. They differ only in the ordering suffix and material/qualification designation, so they are drop-in replacements for one another.

What package and pinout do these devices use?

Both are offered in a 16-pin SOIC (D) package with the same pin assignment: four driver inputs (1A–4A), four driver outputs (1Y–4Y), two enable inputs (1,2EN and 3,4EN), VCC, and GND. The pinout is identical between the IDR and IDG4 variants.

What supply voltage and signaling standard do the AM26C31IDR and AM26C31IDG4 support?

Both operate from a single 5 V supply (4.5 V to 5.5 V range) and provide differential outputs compliant with TIA/EIA-422-B and ITU-T V.11. They are intended for balanced differential data transmission over twisted-pair or parallel-wire cables.

Do the AM26C31IDR and AM26C31IDG4 differ in RoHS or lead-free status?

The AM26C31IDG4 carries TI's "G4" Green designation, indicating RoHS-compliant, Pb-free construction. The AM26C31IDR is the standard ordering code; its RoHS status should be confirmed against the specific manufacturer datasheet or distributor listing, as TI has transitioned many standard suffixes to Green material over time. Designers requiring documented Pb-free status should specify the G4 variant.

Can the AM26C31IDR and AM26C31IDG4 be used interchangeably in an existing PCB layout?

Yes. Because both use the identical 16-pin SOIC (D) package with the same pinout and land pattern, no PCB redesign is required when substituting one for the other. Only the ordering code and material qualification differ.

What are the typical applications for the AM26C31IDR and AM26C31IDG4?

Both are used as balanced differential line drivers in RS-422/RS-485-style transmission systems, industrial control networks, motor control interfaces, and point-to-point data links. Their 3-state outputs allow multiple drivers to share a bus, and their TIA/EIA-422-B compliance supports reliable long-distance differential signaling.