AM26LS32ACDR
STマイクロエレクトロニクス
- Lifecycle
- Active
- Stock
- 2449 個数
- Package
- SOIC-16
- Series
- インターフェース - ドライバ、レシーバ、トランシーバ
AM26LS32ACDRとAM26LV32IDRの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The AM26LV32IDR and AM26LS32ACDR are both quad differential line receivers in the same SOIC-16 package with identical pinout, making the AM26LV32IDR a viable functional replacement candidate for the AM26LS32ACDR in 3.3 V systems. However, the AM26LV32IDR is a low-voltage device rated for 3.0 V to 3.6 V operation, while the AM26LS32ACDR is a 5 V device, so supply voltage compatibility must be confirmed before substitution. Designers must also validate fail-safe behavior and input common-mode range against the specific application requirements.
STマイクロエレクトロニクス
STマイクロエレクトロニクス
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AM26LV32IDR | AM26LS32ACDR | Why it matters |
|---|---|---|---|
| Supply Voltage (Vcc) | 3.0 V to 3.6 V | 4.75 V to 5.25 V | The two devices operate on different supply rails (3.3 V vs 5 V), so they are not drop-in replacements without adjusting the system power supply. |
| Receiver Type | Quad differential line receiver (RS-422/RS-485 compatible) | Quad differential line receiver (RS-422/RS-423/RS-485 compatible) | Both are quad differential receivers, but the AM26LS32A explicitly supports RS-423 single-ended signaling in addition to differential standards, broadening its interface compatibility. |
| Input Common-Mode Voltage Range | -0.3 V to Vcc (approximately -0.3 V to 3.6 V) | -7 V to +7 V | The wider common-mode range of the AM26LS32A provides greater noise immunity and tolerance to ground potential differences in harsh industrial environments. |
| Maximum Data Rate | 32 Mbps | 10 Mbps | The AM26LV32I supports higher signaling speeds, making it preferable for high-speed data links, while the AM26LS32A is adequate for lower-rate legacy interfaces. |
| Propagation Delay | Typical 12 ns | Typical 17 ns | Lower propagation delay improves timing margins and supports higher data rates in synchronous communication systems. |
| Output Logic Compatibility | 3.3 V LVTTL/LVCMOS compatible outputs | 5 V TTL/CMOS compatible outputs | Output levels must match the downstream logic family; mixing a 3.3 V receiver with 5 V logic (or vice versa) can cause level-mismatch and reliability issues. |
| Package | SOIC-16 (D) | SOIC-16 (D) | Both use the same 16-pin SOIC footprint, so board layout and pin assignment are compatible even though electrical characteristics differ. |
| Operating Temperature Range | -40 °C to +85 °C | 0 °C to +70 °C | The industrial temperature range of the AM26LV32I makes it suitable for extended-environment applications where the commercial-grade AM26LS32A may not be specified. |
| Number of Drivers/Receivers | 0 drivers / 4 receivers | 0 drivers / 4 receivers | Both are quad receivers with no integrated drivers, so channel count and functional role in a bus system are equivalent. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AM26LS32ACDR | AM26LV32IDR |
|---|---|---|
| Part Status | Active | Active |
| Type | Receiver | Receiver |
| Protocol | RS422, RS423 | RS422, RS485 |
| Number of Drivers/Receivers | 0/4 | 0/4 |
| Receiver Hysteresis | 50 mV | 50 mV |
| Voltage - Supply | 4.75V ~ 5.25V | 3V ~ 3.6V |
| Operating Temperature | 0°C ~ 70°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
Both devices are quad differential line receivers. The AM26LV32IDR is a low-voltage (3.3 V) device, while the AM26LS32ACDR operates from a 5 V supply. The AM26LV32IDR features a wider common-mode input range of -0.3 V to 5.5 V and is designed for 3.3 V systems, whereas the AM26LS32ACDR has a common-mode range of -7 V to 7 V and is intended for 5 V systems.
Yes, both devices are offered in the same 16-pin SOIC (D) package with identical pin functions, allowing them to share the same PCB footprint. However, the supply voltage difference must be considered before substituting one for the other.
The AM26LV32IDR operates from a single 3.3 V supply (typically 3.0 V to 3.6 V). The AM26LS32ACDR operates from a single 5 V supply (typically 4.75 V to 5.25 V).
Both are designed for balanced differential data transmission. The AM26LV32IDR is optimized for low-voltage differential signaling in 3.3 V systems, while the AM26LS32ACDR is a standard 5 V differential line receiver suitable for RS-422/RS-423-type balanced interfaces. Designers should confirm the specific signaling standard required by the system.
The AM26LV32IDR specifies a common-mode input voltage range of -0.3 V to 5.5 V. The AM26LS32ACDR specifies a common-mode input voltage range of -7 V to 7 V, providing greater tolerance for ground potential differences in 5 V systems.
No. The AM26LV32IDR is a 3.3 V device and is not rated for 5 V supply operation. Substituting it into a 5 V design would exceed its supply rating and is not supported by the manufacturer's datasheet.
Both the AM26LV32IDR and AM26LS32ACDR are specified for the industrial temperature range of -40°C to 85°C, as stated in their respective manufacturer datasheets.