AMC1305M25DWR
STマイクロエレクトロニクス
- Lifecycle
- Active
- Stock
- 3118 個数
- Package
- SOIC-16
- Series
- データ取得 - ADC/DAC - 特殊用途向け
AMC1305M25DWRとAMC1300DWVの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The AMC1305M25DWR and AMC1300DWV are both isolated delta-sigma modulator amplifiers from Texas Instruments sharing a 5.00 mm wide-body SOIC package and a nominal 5 V supply, but they differ in input structure, isolation rating, and channel configuration. The AMC1305M25DWR is a single-channel modulator with a ±250 mV differential input and 5 kV reinforced isolation, while the AMC1300DWV is a single-channel isolated amplifier with a ±250 mV input and 5 kV reinforced isolation. Because the input range and package footprint align, the AMC1300DWV can serve as a functional candidate in applications tolerant of the differing output format and isolation certification details, but the output interface and isolation parameters must be validated against the target design before substitution.
STマイクロエレクトロニクス
STマイクロエレクトロニクス
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AMC1305M25DWR | AMC1300DWV | Why it matters |
|---|---|---|---|
| Input Type | Current (shunt-based, differential) | Voltage (differential) | Determines whether the device senses current via a shunt resistor or directly senses a voltage; this is fundamental to the measurement topology and cannot be substituted without redesigning the sense circuit. |
| Input Voltage Range | ±250 mV | ±250 mV | Defines the maximum differential signal the amplifier can accept; matching ranges ensures the same signal swing can be handled without clipping. |
| Isolation Rating | 5000 V RMS (reinforced) | 5000 V RMS (reinforced) | The isolation voltage determines safety and common-mode transient immunity in high-voltage systems; identical ratings allow equivalent safety margins. |
| Output Interface | CMOS (single-ended digital bitstream) | Differential analog output | The output format dictates the downstream interface: a digital bitstream requires a digital filter/decoder, while an analog output feeds an ADC; these are not directly interchangeable. |
| Supply Voltage (High Side) | 3.0 V to 5.5 V | 3.0 V to 5.5 V | The high-side supply range must match the available isolated supply; identical ranges simplify power design reuse. |
| Supply Voltage (Low Side) | 3.0 V to 5.5 V | 3.0 V to 5.5 V | The low-side supply must match the controller/logic supply; identical ranges allow the same digital interface voltage. |
| Package | SOIC-16 (wide body) | SOIC-16 (wide body) | Package and pinout affect PCB footprint and creepage/clearance; matching packages allow potential board-level reuse. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | The temperature range must cover the application environment; identical ranges ensure equivalent thermal robustness. |
| Gain / Sensitivity | Fixed gain (bitstream density proportional to input) | Fixed gain of 8.2 V/V | Gain determines the transfer function from input to output; differing gain architectures require recalibration of the measurement chain. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AMC1305M25DWR | AMC1300DWV |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Active |
| Type | Isolated Module | Isolation |
| Applications | - | Current Sensing, Power Management |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Channels | 1 | - |
| Resolution(Bits) | 16 b | - |
| Sampling Rate(Per Second) | 78k | - |
| Data Interface | CMOS, Serial | - |
| Voltage Supply Source | Analog and Digital | - |
| Voltage - Supply | 3V ~ 5.5V | - |
| Operating Temperature | -40°C ~ 125°C | - |
The AMC1305M25DWR is a reinforced isolated delta-sigma modulator with a ±250-mV input range, designed for current sensing in motor drives and inverters, outputting a 1-bit bitstream at 20 MHz. The AMC1300DWV is a reinforced isolated amplifier with a ±250-mV input range and a fixed gain of 8.2, providing a differential analog output. The AMC1305M25DWR requires an external digital filter (e.g., sinc3) to reconstruct the signal, while the AMC1300DWV outputs an analog voltage directly.
No. The AMC1305M25DWR is offered in an 8-pin SOIC (DWR) package, while the AMC1300DWV is offered in an 8-pin SOIC (DWV) package with a different pinout. The AMC1305M25DWR provides a clock input and a data output, whereas the AMC1300DWV provides differential analog outputs (VOUTP, VOUTN) and does not have a clock pin. They are not direct drop-in replacements.
Both devices specify a linear input range of ±250 mV (differential) for their analog inputs. The AMC1305M25DWR is optimized for shunt-resistor current sensing with a ±250-mV input, and the AMC1300DWV also specifies a ±250-mV input range with a fixed gain of 8.2. Both are intended for low-side or high-side shunt-based current measurement in isolated systems.
Both devices are reinforced isolated components rated for 5 kV RMS isolation (per UL 1577) and are designed to meet VDE 0884-10 reinforced isolation requirements. The AMC1305M25DWR and AMC1300DWV both provide basic and reinforced isolation suitable for industrial motor drive and inverter applications. Designers should confirm the specific isolation parameters (e.g., working voltage, transient immunity) in the respective datasheets for their end application.
The AMC1305M25DWR is generally preferred for digital control loops because its delta-sigma modulated bitstream output can be processed directly by an MCU or DSP with a digital sinc filter, enabling tight, low-latency current-loop control. The AMC1300DWV outputs an analog signal that must be sampled by an external ADC, adding conversion latency and requiring an additional ADC channel. The choice depends on whether the system architecture is digital-first or analog-first.
Both devices use a dual-supply arrangement: a high-side supply (VDD1) and a low-side supply (VDD2). The AMC1305M25DWR operates with VDD1 = 3.0 V to 5.5 V and VDD2 = 3.0 V to 5.5 V. The AMC1300DWV operates with VDD1 = 3.0 V to 5.5 V and VDD2 = 3.0 V to 5.5 V. Both are compatible with 3.3-V and 5-V logic systems on the low-voltage side, but the exact recommended operating conditions should be verified in each datasheet.
No. Because the two devices have different output interfaces (analog differential vs. 1-bit delta-sigma bitstream), different pinouts, and different external component requirements (the AMC1305M25DWR needs a clock source and digital filter; the AMC1300DWV needs an ADC), a direct replacement without hardware and firmware changes is not possible. A redesign of the signal chain and PCB layout would be required.
The AMC1305M25DWR is typically used in motor drives, servo drives, and solar inverters where a digital current-sense signal is fed to an MCU/DSP for field-oriented control. The AMC1300DWV is typically used in industrial systems where an isolated analog voltage representation of current or voltage is required, such as in PLC analog input modules, isolated voltage sensing, and legacy analog control loops. Both target isolated shunt-based measurement but differ in output format and system architecture.