AMC1300BDWV
STマイクロエレクトロニクス
- Lifecycle
- Active
- Stock
- 6086 個数
- Package
- SOIC-8
- Series
- リニアアンプ - 特殊用途
AMC1300BDWVとAMC1306M25DWVRの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The AMC1306M25DWVR and AMC1300BDWV are both isolated delta-sigma modulator amplifiers sharing a common SOIC-8 footprint and 5 V supply architecture, but they differ in input configuration and output interface. The AMC1306M25DWVR offers a single-ended input with a Manchester-coded bitstream output, while the AMC1300BDWV provides a fully differential input with an analog differential output. Because the output type and input topology are not directly interchangeable, the AMC1300BDWV should be treated as a functional candidate only after validating the signal-chain interface, and it is not a direct drop-in replacement for the AMC1306M25DWVR.
STマイクロエレクトロニクス
STマイクロエレクトロニクス
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AMC1306M25DWVR | AMC1300BDWV | Why it matters |
|---|---|---|---|
| Product Type | Isolated delta-sigma modulator | Isolated amplifier | The output format differs fundamentally: a modulator outputs a 1-bit bitstream requiring digital filtering, while an amplifier outputs an analog voltage, so they are not drop-in substitutes. |
| Output Interface | Digital bitstream (delta-sigma) | Differential analog voltage | The downstream signal chain must match the output type; a digital bitstream needs an MCU/filter, whereas an analog output feeds an ADC directly. |
| Input Voltage Range | ±250 mV | ±250 mV | Both target shunt-based current sensing with the same ±250 mV input span, so the sensed signal level is compatible. |
| Isolation Rating | 5000 V RMS (reinforced) | 5000 V RMS (reinforced) | Reinforced isolation is essential for safety and noise immunity in high-voltage motor-drive and inverter applications. |
| Supply Voltage | 3.0 V to 5.5 V (high side), 2.7 V to 5.5 V (low side) | 3.0 V to 5.5 V (high side), 3.0 V to 5.5 V (low side) | Supply compatibility affects board-level power design; slight low-side range differences can matter for 2.7 V logic systems. |
| Package | 8-pin SOIC (DWV) | 8-pin SOIC (DWV) | Identical package and pinout simplify PCB layout reuse, though electrical function still differs. |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | Matching industrial temperature ranges ensure both parts suit harsh environments. |
| Gain / Sensitivity | Fixed modulator gain (bitstream density proportional to input) | Fixed gain of 8 (V/V) | The transfer characteristic determines how the sensed shunt voltage maps to the output, affecting system calibration and scaling. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AMC1300BDWV | AMC1306M25DWVR |
|---|---|---|
| Part Status | Active | Active |
| Type | Isolation | Isolated Module |
| Applications | Current Sensing, Power Management | - |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | - | 78k |
| Data Interface | - | CMOS, Serial |
| Voltage Supply Source | - | Analog and Digital |
| Voltage - Supply | - | 2.7V ~ 5.5V |
| Operating Temperature | - | -40°C ~ 125°C |
The AMC1306M25DWVR is a single-channel, isolated delta-sigma modulator with a fixed ±250 mV input range and a 20 MHz clock, designed for direct shunt-resistor current sensing. The AMC1300BDWV is an isolated amplifier with a fixed gain of 8.2 and a ±250 mV input range, providing a differential analog output. The AMC1306M25DWVR outputs a 1-bit bitstream, while the AMC1300BDWV outputs an analog voltage, so they serve different signal-chain architectures.
No. The AMC1306M25DWVR is supplied in an 8-pin SOIC (DWV) package, while the AMC1300BDWV is supplied in an 8-pin SOIC (DWV) package as well, but the pin functions differ: the AMC1306M25DWVR provides a clock input and a data output, whereas the AMC1300BDWV provides analog output pins and does not accept an external modulator clock. They are not direct drop-in replacements.
No. Because the AMC1306M25DWVR outputs a 1-bit delta-sigma bitstream requiring a digital filter (e.g., sinc filter) and an external clock, while the AMC1300BDWV outputs an analog voltage that can be fed directly to an ADC, the downstream signal processing, clocking, and PCB routing differ. A redesign of the receive path is required.
Both devices specify a linear input range of ±250 mV for their analog inputs, making them suitable for low-side shunt-resistor current sensing. The AMC1306M25DWVR is optimized for this fixed ±250 mV range with a matched input impedance, and the AMC1300BDWV applies a fixed gain of 8.2 to the same ±250 mV input range.
Both devices are reinforced isolated components rated for 5 kV RMS isolation (per UL 1577) and are specified for a maximum working isolation voltage of 1.5 kV peak per VDE V 0884-11. They are intended for galvanically isolated current-sensing applications in motor drives and inverters.
The AMC1306M25DWVR is better suited for digital signal chains because it outputs a 1-bit delta-sigma bitstream that is processed by a digital filter in an MCU or FPGA, providing inherent digital isolation of the measurement. The AMC1300BDWV is better suited for analog signal chains because it outputs a differential analog voltage that can be sampled by an external ADC, simplifying the digital interface but requiring an ADC on the isolated or non-isolated side.
Both devices use a dual-supply arrangement with a high-side supply (AVDD) and a low-side supply (DVDD). The AMC1306M25DWVR operates with AVDD = 3.0 V to 5.5 V and DVDD = 3.0 V to 5.5 V, while the AMC1300BDWV operates with AVDD = 3.0 V to 5.5 V and DVDD = 3.0 V to 5.5 V. The supply rails are nominally the same, but the current consumption and output interface differ.
The AMC1306M25DWVR is typically used in isolated shunt-based current sensing for motor drives, solar inverters, and battery management systems where a digital bitstream is preferred. The AMC1300BDWV is typically used in isolated current and voltage sensing for industrial motor control, servo drives, and power inverters where an analog output is required by the downstream ADC.