仕様
| 属性 | 値 |
| Supplier | Renesas Electronics America Inc |
| Package / Case | Tray |
| Series | FemtoClock® NG |
| Part Status | Active |
| Type | VCXO |
| Frequency | 669.326582MHz, 693.482991MHz |
| Voltage - Supply | 3.135V ~ 3.465V |
| Supply Current | 130 mA |
| Operating Temperature | -40°C ~ 85°C |
| Supplier Device Package | 6-CLCC (7x5) |
概要
Description
The "Introduction to 8N3DV85KC-0123CDI" likely refers to a specific model or series of a product, system, or technology. While the exact nature of 8N3DV85KC-0123CDI isn't specified, similar designations are frequently used in sectors such as electronics, automotive, or manufacturing to categorize distinct models or components.
An introduction to this model might cover the following key points:
1. Purpose: Explanation of the primary function and intended use of 8N3DV85KC-0123CDI.
2. Features: Highlighting unique or advanced features that distinguish it from previous models or competitors.
3. Specifications: Overview of technical specifications, including dimensions, capacity, performance metrics, and compatibility.
4. Applications: Discussion of typical applications or industries where this model is used.
5. Benefits: Outlining advantages such as efficiency, cost-effectiveness, or technological advancements.
6. User Guidance: Basic instructions or considerations for installation, operation, and maintenance.
For detailed information, the relevant industry documentation or manufacturer's resources should be consulted.
An introduction to this model might cover the following key points:
1. Purpose: Explanation of the primary function and intended use of 8N3DV85KC-0123CDI.
2. Features: Highlighting unique or advanced features that distinguish it from previous models or competitors.
3. Specifications: Overview of technical specifications, including dimensions, capacity, performance metrics, and compatibility.
4. Applications: Discussion of typical applications or industries where this model is used.
5. Benefits: Outlining advantages such as efficiency, cost-effectiveness, or technological advancements.
6. User Guidance: Basic instructions or considerations for installation, operation, and maintenance.
For detailed information, the relevant industry documentation or manufacturer's resources should be consulted.
Equivalent
The 8N3DV85KC-0123CDI chip is a specific oscillator or clock generator from Renesas. To find equivalent products, you would typically look for similar specifications like frequency, voltage, and package. Potential equivalents might come from manufacturers like Texas Instruments, Microchip, or Silicon Labs. Look for clock generators or oscillators with matching parameters in terms of frequency range, voltage, and package type. Always verify compatibility and specifications through datasheets or technical support from manufacturers.
Pinout
The 8N3DV85KC-0123CDI is an oscillator from Renesas Electronics. It features a low pin count package designed for clocking applications. Specifically, this device typically comes in a 6-pin package. Its primary function is to provide a stable clock signal with low phase noise and jitter, supporting frequencies suitable for high-performance applications in networking, communications, and data centers.
The typical pin functions include:
1. VCC: Power supply input.
2. GND: Ground connection.
3. OUT: Clock output.
4. OE (Output Enable): Controls the output state.
5. NC (No Connect) or other control functions depending on the configuration.
The exact configuration might vary slightly based on the specific use case or packaging options, so it is always a good idea to refer to the manufacturer's datasheet for precise details specific to the 8N3DV85KC-0123CDI version in question.
The typical pin functions include:
1. VCC: Power supply input.
2. GND: Ground connection.
3. OUT: Clock output.
4. OE (Output Enable): Controls the output state.
5. NC (No Connect) or other control functions depending on the configuration.
The exact configuration might vary slightly based on the specific use case or packaging options, so it is always a good idea to refer to the manufacturer's datasheet for precise details specific to the 8N3DV85KC-0123CDI version in question.
Application
The 8N3DV85KC-0123CDI is likely a specific model of a crystal oscillator or a related frequency control device, typically used in electronics applications. Such components are essential for generating precise clock signals and are commonly found in:
1. Telecommunications: Synchronizing signals in network infrastructure.
2. Consumer Electronics: Timing in devices like smartphones and laptops.
3. Automotive: Control systems requiring precise timing.
4. Industrial Automation: Coordinating operations in machinery.
5. Aerospace and Defense: Navigation and communication systems.
6. Medical Devices: Ensuring accurate operation of diagnostic equipment.
For detailed applications, referring to the specific datasheet or manufacturer's specifications would be beneficial.
1. Telecommunications: Synchronizing signals in network infrastructure.
2. Consumer Electronics: Timing in devices like smartphones and laptops.
3. Automotive: Control systems requiring precise timing.
4. Industrial Automation: Coordinating operations in machinery.
5. Aerospace and Defense: Navigation and communication systems.
6. Medical Devices: Ensuring accurate operation of diagnostic equipment.
For detailed applications, referring to the specific datasheet or manufacturer's specifications would be beneficial.
