仕様
| 属性 | 値 |
| Package | Bulk,Tube |
| ProductStatus | Active |
| Type | Transceiver |
| Protocol | RS422, RS485 |
| NumberofDrivers/Receivers | 1/1 |
| Duplex | Full |
| ReceiverHysteresis | 100 mV |
| DataRate | 16Mbps |
| Voltage-Supply | 3V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C |
| MountingType | Surface Mount |
| Package/Case | 14-SOIC (0.154, 3.90mm Width) |
概要
Description
ADM3076EARZ is likely a course or module code that requires specific context to accurately describe. However, based on typical academic and training setups, this could refer to a specialized course in a specific field, possibly related to engineering, technology, or business.
If it is an engineering or technology course, it might cover advanced topics in systems design, data management, or software application, focusing on both theoretical frameworks and practical applications. The course could include components like lectures, hands-on projects, and assessments to provide a holistic understanding.
For business, ADM3076EARZ might delve into advanced management principles, economic analysis, or strategic planning, equipping students with skills to address complex challenges in dynamic environments.
Participants would likely gain critical skills relevant to their field, enhancing their analytical, problem-solving, or strategic capabilities. To get precise information, consulting the course syllabus or the offering institution's catalog would be necessary.
If it is an engineering or technology course, it might cover advanced topics in systems design, data management, or software application, focusing on both theoretical frameworks and practical applications. The course could include components like lectures, hands-on projects, and assessments to provide a holistic understanding.
For business, ADM3076EARZ might delve into advanced management principles, economic analysis, or strategic planning, equipping students with skills to address complex challenges in dynamic environments.
Participants would likely gain critical skills relevant to their field, enhancing their analytical, problem-solving, or strategic capabilities. To get precise information, consulting the course syllabus or the offering institution's catalog would be necessary.
Equivalent
The ADM3076EARZ is a high-speed RS-485/RS-422 transceiver. Equivalent products include:
1. MAX3076E from Maxim Integrated - Offers similar high-speed data rates and protection features.
2. SN65HVD3082E from Texas Instruments - Suitable for similar RS-485 communication applications.
3. SP3076E from MaxLinear (formerly Exar) - Provides similar performance with ESD protection.
4. ISL3176E from Renesas (formerly Intersil) - Designed for similar environments with overvoltage protection.
These alternatives offer comparable specifications and are used in similar applications.
1. MAX3076E from Maxim Integrated - Offers similar high-speed data rates and protection features.
2. SN65HVD3082E from Texas Instruments - Suitable for similar RS-485 communication applications.
3. SP3076E from MaxLinear (formerly Exar) - Provides similar performance with ESD protection.
4. ISL3176E from Renesas (formerly Intersil) - Designed for similar environments with overvoltage protection.
These alternatives offer comparable specifications and are used in similar applications.
Features
The ADM3076EARZ is a high-speed, robust RS-485/RS-422 transceiver designed for reliable data communication over long distances and in harsh environments. Here are some of its key features:
1. Data Rate: Supports data rates up to 500 kbps.
2. ESD Protection: Provides enhanced electrostatic discharge (ESD) protection, typically ±15 kV on the transceiver bus pins.
3. Operating Voltage: Operates on a single 3.3V power supply.
4. Fail-Safe: Includes fail-safe receiver inputs for open, short, or terminated idle data lines.
5. Low Power Consumption: Features a low power shutdown mode and reduced current consumption in operating mode.
6. Extended Temperature Range: Operates reliably over an extended temperature range from -40°C to +85°C.
7. Half-Duplex Communication: Supports half-duplex communication, allowing for bidirectional data transfer on a single twisted pair.
8. Driver/Receiver Enable: Includes independent driver and receiver enable pins for better control.
9. Robustness: Offers short-circuit current limiting and thermal shutdown for protection against fault conditions.
These features make the ADM3076EARZ suitable for industrial automation, building automation, and other applications requiring reliable serial communication.
1. Data Rate: Supports data rates up to 500 kbps.
2. ESD Protection: Provides enhanced electrostatic discharge (ESD) protection, typically ±15 kV on the transceiver bus pins.
3. Operating Voltage: Operates on a single 3.3V power supply.
4. Fail-Safe: Includes fail-safe receiver inputs for open, short, or terminated idle data lines.
5. Low Power Consumption: Features a low power shutdown mode and reduced current consumption in operating mode.
6. Extended Temperature Range: Operates reliably over an extended temperature range from -40°C to +85°C.
7. Half-Duplex Communication: Supports half-duplex communication, allowing for bidirectional data transfer on a single twisted pair.
8. Driver/Receiver Enable: Includes independent driver and receiver enable pins for better control.
9. Robustness: Offers short-circuit current limiting and thermal shutdown for protection against fault conditions.
These features make the ADM3076EARZ suitable for industrial automation, building automation, and other applications requiring reliable serial communication.
Pinout
The ADM3076EARZ is a high-speed RS-485/RS-422 transceiver. It typically comes in an 8-pin SOIC (Small Outline Integrated Circuit) package. Here is a brief overview of its pin count and functions:
1. Pin 1 (RO): Receiver Output - This pin outputs the received data.
2. Pin 2 (RE̅̅): Receiver Enable - Active low input to enable the receiver.
3. Pin 3 (DE): Driver Enable - Active high input to enable the driver.
4. Pin 4 (DI): Driver Input - Data input for the driver.
5. Pin 5 (GND): Ground - Common ground reference.
6. Pin 6 (A): Non-inverting Driver Output/Receiver Input.
7. Pin 7 (B): Inverting Driver Output/Receiver Input.
8. Pin 8 (VCC): Power Supply - Positive power supply input.
The ADM3076EARZ is used for reliable high-speed communication in noisy environments and features ESD protection, high-speed data rates, and low power consumption, making it ideal for industrial applications.
1. Pin 1 (RO): Receiver Output - This pin outputs the received data.
2. Pin 2 (RE̅̅): Receiver Enable - Active low input to enable the receiver.
3. Pin 3 (DE): Driver Enable - Active high input to enable the driver.
4. Pin 4 (DI): Driver Input - Data input for the driver.
5. Pin 5 (GND): Ground - Common ground reference.
6. Pin 6 (A): Non-inverting Driver Output/Receiver Input.
7. Pin 7 (B): Inverting Driver Output/Receiver Input.
8. Pin 8 (VCC): Power Supply - Positive power supply input.
The ADM3076EARZ is used for reliable high-speed communication in noisy environments and features ESD protection, high-speed data rates, and low power consumption, making it ideal for industrial applications.
Manufacturer
The ADM3076EARZ is manufactured by Analog Devices, Inc. Analog Devices is a multinational semiconductor company that specializes in the design and manufacturing of analog, mixed-signal, and digital signal processing (DSP) integrated circuits. The company provides solutions used in a wide range of electronic equipment, including communication, computer, industrial, instrumentation, military, aerospace, automotive, and consumer electronics applications. Analog Devices is known for its innovation in high-performance signal processing technologies.
Application
The ADM3076EARZ is a high-speed, low-power RS-485/RS-422 transceiver used in various communication applications. Key application areas include industrial automation systems, where it enables reliable data transmission over long distances in harsh environments. It's also used in building automation for HVAC systems, security systems, and lighting controls, as well as in automotive applications for communication between different vehicle systems. Additionally, it finds use in telecommunications infrastructure, allowing for efficient data exchange in networking equipment. Its robust design and ESD protection make it suitable for use in environments subject to electrical noise and interference.
Package
The ADM3076EARZ is packaged in an 8-lead SOIC (Small Outline Integrated Circuit) package.
