画像は参考用です
APT5010LVFRG
+BOMMOSFET N-CH 500V 47A TO264
-
メーカーマイクロチップ・テクノロジー
-
メーカー品番 #APT5010LVFRG
-
在庫状況9645
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Series | POWER MOS V® |
| PartStatus | Active |
| FETType | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| DraintoSourceVoltage(Vdss) | 500 V |
| Current-ContinuousDrain(Id)@25°C | 47A (Tc) |
| RdsOn(Max)@Id,Vgs | 100mOhm @ 500mA, 10V |
| Vgs(th)(Max)@Id | 4V @ 2.5mA |
| GateCharge(Qg)(Max)@Vgs | 470 nC @ 10 V |
| InputCapacitance(Ciss)(Max)@Vds | 8900 pF @ 25 V |
| MountingType | Through Hole |
| SupplierDevicePackage | TO-264 [L] |
| Package/Case | TO-264-3, TO-264AA |
| BaseProductNumber | APT5010 |
概要
Description
APT5010LVFRG is a high-performance, low-noise operational amplifier designed for precision analog applications. It features a wide supply voltage range, making it suitable for a variety of environments, including industrial and consumer electronics. The amplifier boasts low offset voltage, low bias current, and a fast slew rate, ensuring accurate signal amplification with minimal distortion.
Key characteristics include rail-to-rail output, allowing it to effectively drive loads across the entire supply range. Its low power consumption and small package size make it ideal for battery-operated devices and space-constrained applications. APT5010LVFRG is commonly used in signal conditioning, sensor interfacing, and audio applications.
This op-amp is favored for its stability and reliability, making it a go-to component for engineers looking to enhance the performance of their electronic circuits. Overall, APT5010LVFRG is an excellent choice for applications requiring high precision and low noise in signal processing.
Key characteristics include rail-to-rail output, allowing it to effectively drive loads across the entire supply range. Its low power consumption and small package size make it ideal for battery-operated devices and space-constrained applications. APT5010LVFRG is commonly used in signal conditioning, sensor interfacing, and audio applications.
This op-amp is favored for its stability and reliability, making it a go-to component for engineers looking to enhance the performance of their electronic circuits. Overall, APT5010LVFRG is an excellent choice for applications requiring high precision and low noise in signal processing.
Equivalent
The APT5010LVFRG is a high-power MOSFET, typically used in applications like power management and motor control. Equivalent products include the IRF3205, STP75NF75, and FQP75N06. It's important to verify specifications such as voltage, current ratings, and RDS(on) for compatibility in specific applications before substitution.
Features
The APT5010LVFRG is a high-performance N-channel MOSFET designed for power management applications. Key features include:
1. Voltage Rating: It typically has a maximum drain-source voltage (V_DS) of around 50V, making it suitable for various applications.
2. Current Rating: The device can handle continuous drain currents of up to 10A, suitable for high-power applications.
3. Low On-Resistance: It features a low on-resistance (R_DS(on)), which results in minimal power loss and improved efficiency during operation.
4. Fast Switching Speed: The MOSFET supports high-speed switching, making it ideal for applications such as DC-DC converters and motor drivers.
5. Thermal Performance: With a robust thermal design, it can operate effectively at elevated temperatures, ensuring reliability.
6. Package Type: Typically available in a surface-mount package, facilitating easier integration into circuit designs.
These features make the APT5010LVFRG suitable for applications in industrial equipment, power supplies, and consumer electronics.
1. Voltage Rating: It typically has a maximum drain-source voltage (V_DS) of around 50V, making it suitable for various applications.
2. Current Rating: The device can handle continuous drain currents of up to 10A, suitable for high-power applications.
3. Low On-Resistance: It features a low on-resistance (R_DS(on)), which results in minimal power loss and improved efficiency during operation.
4. Fast Switching Speed: The MOSFET supports high-speed switching, making it ideal for applications such as DC-DC converters and motor drivers.
5. Thermal Performance: With a robust thermal design, it can operate effectively at elevated temperatures, ensuring reliability.
6. Package Type: Typically available in a surface-mount package, facilitating easier integration into circuit designs.
These features make the APT5010LVFRG suitable for applications in industrial equipment, power supplies, and consumer electronics.
Pinout
The APT5010LVFRG is a high-performance N-channel MOSFET with a pin count of 5. It is designed for applications such as power management and motor control.
The pin functions are as follows:
1. Gate (G): Controls the MOSFET's on/off state.
2. Drain (D): The output terminal where the load connects; the current flows out from here when the MOSFET is on.
3. Source (S): The terminal connected to ground or the negative side of the supply, completing the circuit.
4. Thermal pad: Used for heat dissipation, enhancing thermal management.
This component is characterized by low on-resistance and high current handling capabilities, making it suitable for various power applications.
The pin functions are as follows:
1. Gate (G): Controls the MOSFET's on/off state.
2. Drain (D): The output terminal where the load connects; the current flows out from here when the MOSFET is on.
3. Source (S): The terminal connected to ground or the negative side of the supply, completing the circuit.
4. Thermal pad: Used for heat dissipation, enhancing thermal management.
This component is characterized by low on-resistance and high current handling capabilities, making it suitable for various power applications.
Manufacturer
The APT5010LVFRG is manufactured by Advanced Power Technology (APT), a company that specializes in designing and producing semiconductor devices, particularly power MOSFETs and IGBTs (Insulated Gate Bipolar Transistors). APT is known for its focus on high-performance power management solutions used in various applications, including industrial, automotive, and consumer electronics. The company typically emphasizes innovation in power efficiency and thermal management, catering to the growing demand for reliable and efficient power solutions in modern electronic systems.
Application
APT5010LVFRG is a high-performance N-channel MOSFET commonly used in various applications such as power management, motor control, and DC-DC converters. Its low on-resistance and high-speed switching capabilities make it suitable for energy-efficient designs in consumer electronics, automotive systems, and industrial equipment. Additionally, it can be utilized in power supplies, battery management systems, and renewable energy applications like solar inverters.
Package
The APT5010LVFRG is packaged in a TO-220 type package. This packaging provides good thermal performance and is commonly used for power devices to facilitate heat dissipation.
