仕様
| 属性 | 値 |
| Supplier | Microchip Technology |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | AVR® XMEGA® A4U |
| ProductStatus | Active |
| CoreProcessor | AVR |
| CoreSize | 8/16-Bit |
| Speed | 32MHz |
| Connectivity | I²C, IrDA, SPI, UART/USART, USB |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| NumberofI/O | 34 |
| ProgramMemorySize | 32KB (16K x 16) |
| ProgramMemoryType | FLASH |
| EEPROMSize | 1K x 8 |
| RAMSize | 4K x 8 |
| Voltage-Supply(Vcc/Vdd) | 1.6V ~ 3.6V |
| DataConverters | A/D 12x12b; D/A 2x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 44-TQFP |
概要
Description
The ATXMEGA32A4U-AUR is Microchip/Atmel’s AVR XMEGA AU 8‑bit microcontroller with a built‑in USB full‑speed device controller. It targets USB-enabled embedded designs with a rich peripheral set and an enhanced AVR core.
Key points:
- Core: Enhanced RISC AVR CPU, up to about 32 MHz operation.
- Memory: On‑chip Flash (program storage) plus RAM and EEPROM for data.
- Peripherals: USB FS device interface; multiple serial interfaces (USART/UART, SPI, I2C/TWI); timers and PWM; ADCs and analog comparators; Peripheral DMA (PDCA) and an Event System for peripheral-to-peripheral coordination.
- Power: Low‑power sleep modes, brown‑out detection, and other reliability features.
- Package/variant: The AUR designation specifies the USB-enabled AU family in a particular package option.
- Applications: USB peripherals, data acquisition, sensing, and other compact USB‑connected embedded systems.
- Tools: Supported by Microchip Studio/AVR-GCC toolchain and related software resources.
Key points:
- Core: Enhanced RISC AVR CPU, up to about 32 MHz operation.
- Memory: On‑chip Flash (program storage) plus RAM and EEPROM for data.
- Peripherals: USB FS device interface; multiple serial interfaces (USART/UART, SPI, I2C/TWI); timers and PWM; ADCs and analog comparators; Peripheral DMA (PDCA) and an Event System for peripheral-to-peripheral coordination.
- Power: Low‑power sleep modes, brown‑out detection, and other reliability features.
- Package/variant: The AUR designation specifies the USB-enabled AU family in a particular package option.
- Applications: USB peripherals, data acquisition, sensing, and other compact USB‑connected embedded systems.
- Tools: Supported by Microchip Studio/AVR-GCC toolchain and related software resources.
Features
Key features of ATxmega32A4U-AUR (concise):
- Memory: 32 KB flash with ISP, 1 KB EEPROM, 2 KB SRAM
- Core: AVR 8-bit core up to 32 MHz; 1.6–3.6 V operation; extended temperature range
- Peripherals: two USARTs, one SPI, one TWI (I2C); two 12-bit ADCs (up to high MSPS); analog comparator
- Timers: multiple 16-bit timer/counters (plus common timer options)
- Data handling: DMA controller and Event System for peripheral-to-peripheral data routing
- Safety/maintenance: watchdog timer and brown-out detector; CRC engine
- Power: extensive sleep/power-management modes for low power
- I/O: extensive I/O with flexible pin mapping; packaged in 32/44-pin options
- Debug/Programming: on-chip programming support and debugging interfaces
Note: specifics may vary by package; always check the latest datasheet for exact peripheral counts and capabilities.
- Memory: 32 KB flash with ISP, 1 KB EEPROM, 2 KB SRAM
- Core: AVR 8-bit core up to 32 MHz; 1.6–3.6 V operation; extended temperature range
- Peripherals: two USARTs, one SPI, one TWI (I2C); two 12-bit ADCs (up to high MSPS); analog comparator
- Timers: multiple 16-bit timer/counters (plus common timer options)
- Data handling: DMA controller and Event System for peripheral-to-peripheral data routing
- Safety/maintenance: watchdog timer and brown-out detector; CRC engine
- Power: extensive sleep/power-management modes for low power
- I/O: extensive I/O with flexible pin mapping; packaged in 32/44-pin options
- Debug/Programming: on-chip programming support and debugging interfaces
Note: specifics may vary by package; always check the latest datasheet for exact peripheral counts and capabilities.
Pinout
- Pin count: 44 pins (LQFP44, AUR variant)
- Function: ATxmega32A4U is an 8/16-bit AVR XMEGA microcontroller with USB full-speed, typically used for embedded control (32 KB flash, multiple peripherals such as USART/SPI/TWI, ADC, DAC, timers).
- Function: ATxmega32A4U is an 8/16-bit AVR XMEGA microcontroller with USB full-speed, typically used for embedded control (32 KB flash, multiple peripherals such as USART/SPI/TWI, ADC, DAC, timers).
Manufacturer
- Manufacturer: Microchip Technology Inc. (owner of the Atmel brand; ATXMEGA32A4U-AUR is from Atmel’s XMEGA MCU family).
- What kind of company: A multinational American semiconductor company that designs and manufactures microcontrollers, memory, analog, and other embedded ICs.
- What kind of company: A multinational American semiconductor company that designs and manufactures microcontrollers, memory, analog, and other embedded ICs.
Application
ATXMEGA32A4U-AUR is suited for:
- Industrial automation and process control
- USB-enabled peripherals, data acquisition and instrumentation
- Home/building automation and smart devices
- Automotive and vehicle electronics
- Energy metering, power management and battery monitoring
- Consumer electronics, appliances and prototyping/education
- General-purpose, low‑power, real-time embedded systems with ADC/DAC, PWM, timers and multiple serial interfaces
Key capabilities enabling these areas: rich analog/digital peripherals, USB device interface, timers and PWM, multiple serial interfaces (USART/SPI/I2C), and event-driven architecture.
- Industrial automation and process control
- USB-enabled peripherals, data acquisition and instrumentation
- Home/building automation and smart devices
- Automotive and vehicle electronics
- Energy metering, power management and battery monitoring
- Consumer electronics, appliances and prototyping/education
- General-purpose, low‑power, real-time embedded systems with ADC/DAC, PWM, timers and multiple serial interfaces
Key capabilities enabling these areas: rich analog/digital peripherals, USB device interface, timers and PWM, multiple serial interfaces (USART/SPI/I2C), and event-driven architecture.
Package
80-pin TQFP (LQFP) package.
