BC327-40

画像は参考用です

BC327-40

+BOM

TRANS PNP 45V 0.8A TO92

  • メーカーディオテックセミコンダクター

  • メーカー品番 #BC327-40

  • データシート BC327-40 DataSheet

  • パッケージ TO-92

  • 在庫状況2590

365 日間品質保証

7*24 日間の品質保証

90-時間単位のサービス保証

1日間のアフターサービス保証

仕様

属性 値
Package / Case Strip
Part Status Active
Transistor Type PNP
Current - Collector(Ic)(Max) 800 mA
Voltage - Collector Emitter Breakdown(Max) 45 V
Vce Saturation(Max) @ Ib Ic 700mV @ 50mA, 500mA
Current - Collector Cutoff(Max) 100nA
DC Current Gain(h FE)(Min) @ Ic Vce 250 @ 100mA, 1V
Power - Max 625 mW
Frequency - Transition 100MHz
Operating Temperature -55°C ~ 150°C (TJ)
Mounting Type Through Hole

概要

Equivalent

The BC327-40 is a PNP transistor. Equivalent alternatives include:
- BC557B (similar specs, higher gain)
- 2N3906 (common PNP, lower current)
- BC328 (close match, slightly different gain)
- 2SA1015 (Japanese equivalent)
Check datasheets for exact parameters like current (500mA), voltage (45V), and hFE (250-630). Substitutes may vary slightly in gain or power handling.

Pinout

The BC327-40 is a PNP bipolar junction transistor (BJT) with 3 pins (TO-92 package):
1. Emitter (E) – Connects to the higher voltage (more negative for PNP).
2. Base (B) – Controls conduction; bias current flows into the base.
3. Collector (C) – Output; current flows out (to a lower voltage).
Key Features:
- High current gain (hFE ≈ 250–630 @ 100mA)
- Max collector current (IC) = 800mA
- Max collector-emitter voltage (VCEO) = -45V
Commonly used in amplification, switching, and low-power applications.

Manufacturer

The BC327-40 is a PNP bipolar junction transistor (BJT) manufactured by ON Semiconductor, a well-known American semiconductor company. ON Semiconductor specializes in energy-efficient innovations, providing a wide range of power management, analog, and discrete semiconductor solutions for automotive, industrial, and consumer markets.
The company was originally part of Motorola’s semiconductor division before becoming independent in 1999. It is recognized for high-quality components, including transistors like the BC327-40, which is commonly used in amplification and switching applications.
ON Semiconductor is a global leader, known for reliability and innovation in semiconductor technology.

Application

The BC327-40 is a PNP bipolar junction transistor (BJT) commonly used in:
1. Amplification – Audio and signal amplification in low-power circuits.
2. Switching – On/off control in relays, LEDs, and small loads.
3. Signal Inversion – Logic level shifting in digital circuits.
4. Complementary Pairs – Paired with NPN transistors (e.g., BC337) in push-pull configurations.
5. Consumer Electronics – Found in toys, radios, and small appliances.
Its high current gain (hFE up to 630) and low saturation voltage make it suitable for low-voltage, low-power applications.

Package

The BC327-40 is a PNP transistor packaged in a TO-92 type. This is a small, through-hole plastic package with three leads (Emitter, Base, Collector). It is commonly used for general-purpose amplification and switching applications. The TO-92 package is compact, cost-effective, and suitable for low-power circuits.

BC327-40に関連する製品

  • 迅速な見積もり

  • 見積もり依頼を送信 BC327-40 このフォームをご利用ください。12時間以内にご返信いたします。