BTA16-600CWRG

画像は参考用です

BTA16-600CWRG

+BOM

TRIAC ALTERNISTOR 600V TO220AB

365 日間品質保証

7*24 日間の品質保証

90-時間単位のサービス保証

1日間のアフターサービス保証

仕様

属性 値
Package Tube
Series Snubberless™
ProductStatus Active
TriacType Alternistor - Snubberless
Voltage-OffState 600 V
Current-OnState(It(RMS))(Max) 16 A
Voltage-GateTrigger(Vgt)(Max) 1.3 V
Current-NonRepSurge5060Hz(Itsm) 160A, 168A
Current-GateTrigger(Igt)(Max) 35 mA
Current-Hold(Ih)(Max) 35 mA
Configuration Single
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Through Hole
Package/Case TO-220-3

概要

Description

The BTA16-600CWRG is a 16A, 600V TRIAC designed for AC power control applications. It features a sensitive gate for low trigger current, making it suitable for use with microcontrollers or logic circuits. The device is housed in a TO-220AB package, ensuring efficient heat dissipation.
Key characteristics:
- Voltage Rating: 600V (blocking)
- Current Rating: 16A (RMS)
- Gate Trigger Current (I_GT): 5–35mA (typ.)
- Isolation Voltage: 2500V (min.)
Common applications include:
- Dimmer circuits
- Motor speed control
- Heating regulation
- Solid-state relays
The CWRG suffix indicates snubberless operation, allowing it to handle inductive loads without external snubber circuits. It is RoHS compliant and widely used in industrial and consumer electronics.
For detailed specs, refer to the datasheet.

Equivalent

The BTA16-600CWRG is a 16A, 600V TRIAC. Equivalent products include:
- BTA16-600BW (similar specs, different package)
- BTB16-600BW (insulated tab version)
- T1635T-6G (from STMicroelectronics)
- MAC16A6 (from Littelfuse)
- Z0103MN (lower current, but similar voltage, from ST)
Check datasheets for exact compatibility in your circuit.

Features

The BTA16-600CWRG is a 16A, 600V TRIAC with the following key features:
- Current Rating: 16A RMS (on-state current)
- Voltage Rating: 600V (repetitive peak off-state voltage)
- Package: TO-220AB (isolated tab for easier heatsink mounting)
- Gate Trigger Current (I_GT): 35mA max
- Holding Current (I_H): 50mA typical
- Snubberless Design: Can handle high dV/dt without external snubber
- Applications: AC switching, motor control, lighting, and heating controls
- Isolation Voltage: 2500V RMS (between terminals and heatsink)
Suitable for general-purpose AC load switching with robust performance.

Pinout

The BTA16-600CWRG is a 16A, 600V triac in a TO-220AB package with 3 pins.
Pin Functions:
1. MT1 (Main Terminal 1): Connects to one side of the AC load.
2. Gate (G): Controls triggering via a small current/voltage.
3. MT2 (Main Terminal 2): Connects to the other side of the AC load and handles higher current.
This triac is used for AC switching in applications like dimmers, motor control, and relays. It features snubberless operation (reduced need for external snubber circuits) and is insulated (isolated tab).

Application

The BTA16-600CWRG is a 600V, 16A TRIAC used in AC power control applications. Key areas include:
- Lighting Control: Dimming circuits for incandescent and LED lights.
- Motor Speed Regulation: Adjusting speeds in fans, pumps, and small appliances.
- Heating Systems: Temperature control in heaters and ovens.
- AC Switching: Relays and solid-state switches in industrial/consumer devices.
- Home Appliances: Used in washing machines, vacuum cleaners, and coffee makers.
Its snubberless design reduces external components, making it suitable for compact, cost-effective solutions.

Package

The BTA16-600CWRG is a 16A, 600V TRIAC typically packaged in TO-220AB (isolated tab). This package features a plastic body with an electrically isolated metal tab, enhancing thermal performance while preventing short circuits. It’s suitable for through-hole PCB mounting and heat sinking. The "WRG" suffix often denotes Rohm's standard packaging.

BTA16-600CWRGに関連する製品

相関比較

  • 迅速な見積もり

  • 見積もり依頼を送信 BTA16-600CWRG このフォームをご利用ください。12時間以内にご返信いたします。