BZX84C6V2

画像は参考用です

BZX84C6V2

+BOM

DIODE ZENER 6.2V 350MW SOT-23

365 日間品質保証

7*24 日間の品質保証

90-時間単位のサービス保証

1日間のアフターサービス保証

仕様

属性 値
Supplier Rectron USA
Package Tape & Reel (TR)
ProductStatus Active
Voltage-Zener(Nom)(Vz) 6.2 V
Tolerance ±5%
Power-Max 350 mW
Impedance(Max)(Zzt) 10 Ohms
Current-ReverseLeakage@Vr 3 µA @ 4 V
Voltage-Forward(Vf)(Max)@If 900 mV @ 10 mA
MountingType Surface Mount
Package/Case TO-236-3, SC-59, SOT-23-3

概要

Description

BZX84C6V2 is a small, surface‑mount Zener diode (BZX84C series) with a nominal Zener voltage of 6.2 V. Key points:
- Package: SOT-23, two active terminals (pins 1 and 3), pin 2 often NC (check datasheet).
- Voltage: Vz ≈ 6.2 V; tolerance ±5% (C-series).
- Power: 0.5 W maximum dissipation at room temperature (derate with ambient).
- Operation: reverse-biased to hold about 6.2 V across it; used as a voltage reference or regulator/clamp.
- Typical current: IZT ≈ 5 mA for rating; dynamic impedance specified at IZT.
- Applications: simple voltage reference, overvoltage protection, clamping, and low-power regulator circuits.
Polarity: cathode (banded end) is the higher-potential terminal in reverse operation.

Equivalent

Equivalent parts for BZX84C6V2 (6.2 V, ~0.5 W Zener in SOT-23) include:
- BZX84C6V2 from other vendors (NXP, ON Semiconductor, ROHM, Vishay, Diodes Inc)
- BZT52C6V2 (SOD-123 package)
- BZV55-C6V2 (axial lead)
Note: packaging varies; check datasheets for exact pinout and power rating.

Features

- Zener diode from the BZX84 family for voltage regulation/reference
- Nominal Zener voltage: 6.2 V
- Power rating: 0.5 W maximum
- Package: small surface-mount device (SMD)
- Tolerance: ±5% (C variant)
- Wide operating/ storage temperature range: typically -65°C to +150°C
- Low dynamic impedance suitable for regulation and reference applications
- RoHS compliant and widely available

Pinout

BZX84C6V2 is a 6.2-volt Zener diode in an SOT-23 package. It is a 2-terminal device (anode and cathode) with three package pins: Pin 1 = Anode, Pin 2 = Not Connected, Pin 3 = Cathode. Used for voltage regulation/clamping around 6.2 V.

Manufacturer

There isn’t a single manufacturer. The BZX84C6V2 is produced by several companies, notably Vishay Intertechnology, Nexperia, Diodes Incorporated, ROHM, and ON Semiconductor.
Vishay (one common source) is a global manufacturer of discrete semiconductors and passive electronic components, designing and producing diodes, transistors, resistors, capacitors, inductors, and related devices.

Application

BZX84C6V2 is a 6.2V Zener diode (0.5W). Common applications:
- Simple shunt regulator to provide a ~6.2V reference in low‑current circuits
- Reference voltage for ADCs/comparators and other analog blocks
- Overvoltage/transient protection by clamping voltages on rails or I/O lines
- Spike suppression and input protection in lightweight consumer electronics and automotive interfaces

Package

SOT-23 (3-pin) surface-mount package; a two-terminal Zener diode.

BZX84C6V2に関連する製品

相関比較

  • 迅速な見積もり

  • 見積もり依頼を送信 BZX84C6V2 このフォームをご利用ください。12時間以内にご返信いたします。