画像は参考用です
CD4052BE
+BOMDIFFERENTIAL MUX, 4 CHANNEL
-
メーカーNXP USA Inc.
-
メーカー品番 #CD4052BE
-
データシート CD4052BE DataSheet
-
パッケージ PDIP-16
-
在庫状況4649
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Package / Case | Tube |
| Part Status | Obsolete |
| Switch Circuit | SP4T |
| Multiplexer / Demultiplexer Circuit | 4:1 |
| Number of Circuits | 2 |
| On - State Resistance(Max) | 240Ohm |
| Channel - to - Channel Matching(ΔRon) | 5Ohm |
| Voltage - Supply, Single (V+) | 3V ~ 20V |
| Voltage - Supply, Dual (V±) | ±2.5V ~ 9V |
| -3 dB Bandwidth | 25MHz |
| Channel Capacitance(CS(off)CD(off)) | 0.2pF, 18pF |
| Current - Leakage(IS(off))(Max) | 100nA |
| Crosstalk | -40dB @ 10MHz |
| Operating Temperature | -55°C ~ 125°C (TA) |
| Mounting Type | Through Hole |
概要
Description
The CD4052BE is an analog multiplexer/demultiplexer integrated circuit commonly used in electronic projects for routing signals. It is part of the 4000 series of CMOS logic ICs. The component features a dual 4-channel configuration, meaning it can route one of four input signals to a single output, or vice versa, in two separate channels. This makes it versatile for applications requiring signal selection or distribution.
Key features include:
- Operating Voltage: Typically 3V to 15V, with a maximum of 18V.
- Low ON Resistance: Approximately 125 ohms at VDD = 15V, allowing for efficient signal transmission.
- Low Power Consumption: Ideal for battery-operated devices.
- Control Inputs: Two binary control inputs (A, B) determine the active channel.
- Enable Pin: Allows the device to be easily integrated into larger circuits by enabling or disabling the multiplexer function.
The CD4052BE is widely used in audio systems, data acquisition, and instrumentation circuits where signal routing is essential. Its reliability and ease of use make it a staple in both hobbyist and professional applications.
Key features include:
- Operating Voltage: Typically 3V to 15V, with a maximum of 18V.
- Low ON Resistance: Approximately 125 ohms at VDD = 15V, allowing for efficient signal transmission.
- Low Power Consumption: Ideal for battery-operated devices.
- Control Inputs: Two binary control inputs (A, B) determine the active channel.
- Enable Pin: Allows the device to be easily integrated into larger circuits by enabling or disabling the multiplexer function.
The CD4052BE is widely used in audio systems, data acquisition, and instrumentation circuits where signal routing is essential. Its reliability and ease of use make it a staple in both hobbyist and professional applications.
Equivalent
The CD4052BE is a dual 4-channel analog multiplexer/demultiplexer. Equivalent products include the MC14052BCP, HEF4052B, and TC4052BP, which offer similar functionality. Additionally, the MAX4052 and 74HC4052 are also considered equivalent in terms of performance and operation. Ensure compatibility by comparing specific parameters such as supply voltage, switching speeds, and package types before replacement.
Features
The CD4052BE is an analog multiplexer/demultiplexer integrated circuit, notable for its dual 4-channel configuration. Key features include:
1. Dual Multiplexer/Demultiplexer: It operates with two independent 4-channel mux/demux, enabling it to route one of four inputs to a single output line in each section, or vice versa.
2. Wide Supply Voltage Range: Supports operation from 3V to 15V, allowing for flexible integration in various systems.
3. Low ON Resistance: The typical ON resistance is around 125 ohms at a 5V supply, ensuring minimal signal loss and distortion.
4. Low Crosstalk: Designed to minimize signal interference between channels, enhancing signal integrity.
5. High Noise Immunity: Features a large noise margin due to its CMOS technology, making it robust against electrical noise.
6. TTL Compatibility: Compatible with TTL voltage levels, facilitating interfacing with TTL logic devices.
7. ESD Protection: Built-in electrostatic discharge protection to improve device reliability.
These features make the CD4052BE suitable for a variety of applications, including data routing, signal gating, and audio/video signal switching.
1. Dual Multiplexer/Demultiplexer: It operates with two independent 4-channel mux/demux, enabling it to route one of four inputs to a single output line in each section, or vice versa.
2. Wide Supply Voltage Range: Supports operation from 3V to 15V, allowing for flexible integration in various systems.
3. Low ON Resistance: The typical ON resistance is around 125 ohms at a 5V supply, ensuring minimal signal loss and distortion.
4. Low Crosstalk: Designed to minimize signal interference between channels, enhancing signal integrity.
5. High Noise Immunity: Features a large noise margin due to its CMOS technology, making it robust against electrical noise.
6. TTL Compatibility: Compatible with TTL voltage levels, facilitating interfacing with TTL logic devices.
7. ESD Protection: Built-in electrostatic discharge protection to improve device reliability.
These features make the CD4052BE suitable for a variety of applications, including data routing, signal gating, and audio/video signal switching.
Pinout
The CD4052BE is a dual 4-channel analog multiplexer/demultiplexer IC. It has 16 pins in total. Here is a brief overview of its pin configuration and function:
1. Pin 1 (X0): Channel 0 input/output of the first multiplexer.
2. Pin 2 (X1): Channel 1 input/output of the first multiplexer.
3. Pin 3 (X2): Channel 2 input/output of the first multiplexer.
4. Pin 4 (X3): Channel 3 input/output of the first multiplexer.
5. Pin 5 (COM X): Common input/output for the first multiplexer.
6. Pin 6 (COM Y): Common input/output for the second multiplexer.
7. Pin 7 (Y3): Channel 3 input/output of the second multiplexer.
8. Pin 8 (Y2): Channel 2 input/output of the second multiplexer.
9. Pin 9 (Y1): Channel 1 input/output of the second multiplexer.
10. Pin 10 (Y0): Channel 0 input/output of the second multiplexer.
11. Pin 11 (INH): Inhibit pin; disables all channels when high.
12. Pin 12 (A): Address select bit 1.
13. Pin 13 (B): Address select bit 2.
14. Pin 14 (VSS): Ground.
15. Pin 15 (VDD): Positive supply voltage.
16. Pin 16 (ENABLE): Enables the device when low.
The CD4052BE is used in applications requiring signal routing and switching, efficiently channeling signals from multiple inputs to a single output or vice versa.
1. Pin 1 (X0): Channel 0 input/output of the first multiplexer.
2. Pin 2 (X1): Channel 1 input/output of the first multiplexer.
3. Pin 3 (X2): Channel 2 input/output of the first multiplexer.
4. Pin 4 (X3): Channel 3 input/output of the first multiplexer.
5. Pin 5 (COM X): Common input/output for the first multiplexer.
6. Pin 6 (COM Y): Common input/output for the second multiplexer.
7. Pin 7 (Y3): Channel 3 input/output of the second multiplexer.
8. Pin 8 (Y2): Channel 2 input/output of the second multiplexer.
9. Pin 9 (Y1): Channel 1 input/output of the second multiplexer.
10. Pin 10 (Y0): Channel 0 input/output of the second multiplexer.
11. Pin 11 (INH): Inhibit pin; disables all channels when high.
12. Pin 12 (A): Address select bit 1.
13. Pin 13 (B): Address select bit 2.
14. Pin 14 (VSS): Ground.
15. Pin 15 (VDD): Positive supply voltage.
16. Pin 16 (ENABLE): Enables the device when low.
The CD4052BE is used in applications requiring signal routing and switching, efficiently channeling signals from multiple inputs to a single output or vice versa.
Manufacturer
The CD4052BE is manufactured by Texas Instruments, an American technology company known for designing and manufacturing semiconductors and various integrated circuits. Founded in 1930 and headquartered in Dallas, Texas, the company is one of the largest producers of analog technology components, embedded processors, and digital signal processors. Texas Instruments serves a wide range of industries, including automotive, industrial, personal electronics, and communications equipment.
Application
The CD4052BE is a dual 4-channel analog multiplexer/demultiplexer used in various applications. It is commonly employed in signal routing, allowing a single input to be directed to one of several outputs or vice versa. Applications include audio and video signal switching, data acquisition systems, and communication systems. It is also used in instrumentation and control systems to manage multiple sensor inputs. Additionally, the CD4052BE is utilized in microcontroller interface circuits for expanding input/output capabilities. Its low power consumption and compatibility with various logic families make it suitable for both analog and digital signal processing applications.
Package
The CD4052BE is a dual 4-channel analog multiplexer/demultiplexer, and it is typically available in a Dual In-line Package (DIP) with 16 pins. This package type is suitable for through-hole mounting on a printed circuit board.
