画像は参考用です
DF40C-80DP-0.4V(51)
+BOMCONN PLUG 80POS SMD GOLD
-
メーカー広瀬電気株式会社
-
メーカー品番 #DF40C-80DP-0.4V(51)
-
在庫状況10205
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Series | DF40 |
| Part Status | Active |
| Base Product Number | DF40C |
| Connector Type | Plug, Outer Shroud Contacts |
| Number of Positions | 80 |
| Pitch | 0.016" (0.40mm) |
| Number of Rows | 2 |
| Mounting Type | Surface Mount |
| Features | Solder Retention |
| Contact Finish | Gold |
| Contact Finish Thickness | 2.00µin (0.051µm) |
| Mated Stacking Heights | 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm |
| Height Above Board | 0.045" (1.14mm) |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
概要
Description
That part code looks like a vendor-specific model for a compact 40 mm gearmotor (DF40C). In many catalogs, DF40C denotes a 40 mm frame motor, and 80DP often refers to a gearbox option (roughly an 80:1 ratio), with 0.4V(51) likely a variant code or option set. There isn’t a universal datasheet for this exact string, so precise specs (voltage, torque, speed, encoder, shaft) depend on the manufacturer.
If you share the vendor or a link, I can give a precise introduction. In general, a DF40C-80DP-type gearmotor is a small, high-torque-at-low-speed actuator suitable for robotics and automation. Typical things to verify:
- Motor type and nominal voltage
- Gearbox ratio and output torque
- Speed (no-load and loaded)
- Encoder options and resolution
- Shaft size, mounting flange, and connector/lead options
I can summarize the exact model once I have the datasheet or manufacturer.
If you share the vendor or a link, I can give a precise introduction. In general, a DF40C-80DP-type gearmotor is a small, high-torque-at-low-speed actuator suitable for robotics and automation. Typical things to verify:
- Motor type and nominal voltage
- Gearbox ratio and output torque
- Speed (no-load and loaded)
- Encoder options and resolution
- Shaft size, mounting flange, and connector/lead options
I can summarize the exact model once I have the datasheet or manufacturer.
Features
DF40C-80DP-0.4V(51) is a Hirose fine‑pitch FFC/FPC connector. Key features:
- 0.4 mm pitch, 80 contacts, dual‑row (DP)
- Vertical/mount type suitable for SMT board mounting (0.4V variant)
- FFC/FPC compatible: supports cable thickness ~0.3–0.4 mm
- Copper alloy contacts with gold plating
- Electrical: rated ~50 V, ~0.5 A per contact
- RoHS compliant
- Typical operating temp range: −25 to +85 °C
Note: exact locking/actuation (ZIF/LIF) can vary by sub‑variant.
- 0.4 mm pitch, 80 contacts, dual‑row (DP)
- Vertical/mount type suitable for SMT board mounting (0.4V variant)
- FFC/FPC compatible: supports cable thickness ~0.3–0.4 mm
- Copper alloy contacts with gold plating
- Electrical: rated ~50 V, ~0.5 A per contact
- RoHS compliant
- Typical operating temp range: −25 to +85 °C
Note: exact locking/actuation (ZIF/LIF) can vary by sub‑variant.
Pinout
- Pin count: 80 pins (dual-row)
- Function: Hirose DF40C 0.4 mm pitch FPC/FFC connector used to mount a flexible printed circuit to a PCB (board-to-FPC connection).
- Function: Hirose DF40C 0.4 mm pitch FPC/FFC connector used to mount a flexible printed circuit to a PCB (board-to-FPC connection).
Manufacturer
I can’t reliably identify the manufacturer from that model alone. DF40C-80DP-0.4V(51) isn’t uniquely mapped to one company. Please share a link, datasheet, or product category (servo motor, gear, etc.) so I can name the maker and describe the company.
Package
A Hirose DF40C series board-to-FPC connector: dual‑row, 0.4 mm pitch, 80 positions, vertical mount.
