DG411FEUE+T

画像は参考用です

DG411FEUE+T

+BOM

IC SW SPST-NCX4 35OHM 16TSSOP

  • メーカーアナログ・デバイセズ社/マキシム・インテグレーテッド

  • メーカー品番 #DG411FEUE+T

  • データシート DG411FEUE+T DataSheet

  • 在庫状況9635

365 日間品質保証

7*24 日間の品質保証

90-時間単位のサービス保証

1日間のアフターサービス保証

仕様

属性 値
PartStatus Active
BaseProductNumber DG411
SwitchCircuit SPST - NC
Multiplexer/DemultiplexerCircuit 1:1
NumberofCircuits 4
On-StateResistance(Max) 35Ohm
Channel-to-ChannelMatching(ΔRon) 200mOhm
Voltage-Supply,Single(V+) 9V ~ 36V
Voltage-Supply,Dual(V±) ±4.5V ~ 20V
SwitchTime(Ton,Toff)(Max) 175ns, 145ns
ChargeInjection 5pC
ChannelCapacitance(CS(off),CD(off)) 15pF, 47pF
Current-Leakage(IS(off))(Max) 250pA
Crosstalk -105dB @ 1MHz
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package 16-TSSOP (0.173", 4.40mm Width)
SupplierDevicePackage 16-TSSOP
Packaging Tape & Reel (TR)

概要

Description

DG411FEUE+T is a DG411 family CMOS analog switch. It provides an electronically controlled path to connect an input to an output under digital control, enabling signal routing or multiplexing in instrumentation and test equipment. The device features low on-resistance when ON, low leakage when OFF, and bidirectional signal capability within the supply rails. FEUE+T suggests RoHS-compliant packaging; +T means tape-and-reel.
Typical uses: signal routing in data acquisition, instrumentation front-ends, audio paths, and test gear.
How to use: supply V+ and V− within rating, drive the control with a logic signal, connect signals to the A and B terminals, and keep signals within the allowed range.
For exact specs (on-resistance, leakage, timing) consult the DG411FEUE+T datasheet.

Equivalent

DG411FEUE+T is a single-channel bilateral CMOS analog switch (DG411 family). Direct equivalents depend on your supply and Rds(on). Typical cross-references: Analog Devices ADG411/ADG511; TI TS5A23157/TS5A9411; Maxim MAX4620/MAX4621. Check datasheets for exact package/pinout and voltage ranges to ensure a proper match.

Pinout

- Pin count: 8 pins (SOIC/8 package)
- Function: DG411FEUE+T is a single-channel CMOS analog switch (SPST). It switches one analog path on/off under a digital control input, allowing or disconnecting the signal path.

Manufacturer

- Manufacturer: Analog Devices, Inc. (ADI)
- What kind of company: A multinational semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits.

Application

DG411FEUE+T is an analog switch device. Common application areas include:
- Analog signal routing and multiplexing in instrumentation and data acquisition
- Audio/video signal switching and routing
- Front-end switching for sample-and-hold circuits and instrumentation amplifiers
- RF/communications front-ends and tuners
- Test equipment and automated test equipment (ATE) signal paths
- Portable/low-power measurement equipment and medical devices requiring simple, reliable switching
Note: Use as a bilateral/SPDT analog switch to route signals with low leakage and low on-resistance.

Package

SOIC-8 (8-pin Small Outline) package. The +T suffix indicates Tape & Reel packaging (lead-free variant).

DG411FEUE+Tに関連する製品

相関比較

  • 迅速な見積もり

  • 見積もり依頼を送信 DG411FEUE+T このフォームをご利用ください。12時間以内にご返信いたします。