画像は参考用です
DMP4065S-7
+BOMMOSFET P-CH 40V 2.4A SOT23
-
メーカーアナログ・デバイセズ
-
メーカー品番 #DMP4065S-7
-
データシート DMP4065S-7 DataSheet
-
パッケージ SOT-23-3
-
在庫状況7765
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| FET Type | P-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 40 V |
| Current - Continuous Drain(Id) @ 25°C | 2.4A (Ta) |
| Drive Voltage(Max Rds On Min Rds On) | 4.5V, 10V |
| Rds On(Max) @ Id Vgs | 80mOhm @ 4.2A, 10V |
| Vgs(th)(Max) @ Id | 3V @ 250µA |
| Gate Charge(Qg)(Max) @ Vgs | 12.2 nC @ 10 V |
| Vgs(Max) | ±20V |
| Input Capacitance(Ciss)(Max) @ Vds | 587 pF @ 20 V |
| Power Dissipation (Max) | 720mW (Ta) |
| Operating Temperature | -55°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | SOT-23-3 |
概要
Description
The DMP4065S-7 is a specific model of MOSFET, which stands for Metal-Oxide-Semiconductor Field-Effect Transistor. This component is widely used in electronic circuits for switching and amplifying electronic signals. The "DMP" typically indicates a particular series or type within the manufacturer's lineup, while the numbers and letters that follow provide specific information about its characteristics.
The key features of the DMP4065S-7 include:
1. Voltage and Current Ratings: It typically has a maximum drain-source voltage (Vds) and drain current (Id) rating, crucial for determining its suitability for particular applications.
2. On-Resistance: Low on-resistance is desirable for efficiency, and this model may offer competitive values, reducing power loss in switching applications.
3. Package Type: It usually comes in a surface-mount package, allowing for compact and efficient circuit designs.
4. Applications: Commonly used in power management, motor control, and various other electronic applications requiring efficient switching.
Overall, the DMP4065S-7 is valued for its performance and efficiency in electronic applications, particularly where space and power efficiency are critical.
The key features of the DMP4065S-7 include:
1. Voltage and Current Ratings: It typically has a maximum drain-source voltage (Vds) and drain current (Id) rating, crucial for determining its suitability for particular applications.
2. On-Resistance: Low on-resistance is desirable for efficiency, and this model may offer competitive values, reducing power loss in switching applications.
3. Package Type: It usually comes in a surface-mount package, allowing for compact and efficient circuit designs.
4. Applications: Commonly used in power management, motor control, and various other electronic applications requiring efficient switching.
Overall, the DMP4065S-7 is valued for its performance and efficiency in electronic applications, particularly where space and power efficiency are critical.
Equivalent
The DMP4065S-7 is a P-channel MOSFET. Equivalent products might include similar P-channel MOSFETs with comparable voltage and current ratings, such as the IRF9540N, FQP27P06, and AOI4065. When selecting an equivalent, ensure the voltage, current ratings, package type, and other electrical characteristics match your application's requirements. Always consult datasheets to verify compatibility.
Features
The DMP4065S-7 is a dual P-channel MOSFET designed for power management applications. It features a low on-resistance, which is critical for minimizing power losses and improving efficiency. The MOSFET is rated for a maximum drain-source voltage (V_DS) of -60V, allowing it to handle relatively high voltage applications safely. Its continuous drain current (I_D) is rated at -4A, making it suitable for a variety of power control and switching tasks.
The DMP4065S-7 is housed in a compact, surface-mount SO-8 package, which is ideal for space-constrained applications. This package supports high-density board assembly and efficient thermal performance due to its low thermal resistance. The device also comes with fast switching capabilities, enhancing its performance in applications requiring high-frequency operation. Additionally, it incorporates a gate-source voltage (V_GS) range of ±20V, offering protection against electrostatic discharge (ESD).
Overall, the DMP4065S-7 is an efficient, robust solution for applications needing reliable switching performance, such as DC-DC converters, load switches, and power management systems.
The DMP4065S-7 is housed in a compact, surface-mount SO-8 package, which is ideal for space-constrained applications. This package supports high-density board assembly and efficient thermal performance due to its low thermal resistance. The device also comes with fast switching capabilities, enhancing its performance in applications requiring high-frequency operation. Additionally, it incorporates a gate-source voltage (V_GS) range of ±20V, offering protection against electrostatic discharge (ESD).
Overall, the DMP4065S-7 is an efficient, robust solution for applications needing reliable switching performance, such as DC-DC converters, load switches, and power management systems.
Pinout
The DMP4065S-7 is a P-channel MOSFET. It typically comes in a standard SOT-223 package. The SOT-223 package has 3 pins plus a tab, which is considered the fourth connection. Here’s the pin configuration:
1. Gate (G): This is the control terminal that modulates the channel conductivity.
2. Drain (D): The terminal where the current enters the MOSFET.
3. Source (S): The terminal from which the current exits the MOSFET.
4. Tab (also Drain): The large tab is internally connected to the drain to help in heat dissipation.
Functionally, the DMP4065S-7 is used for switching applications. It allows current to flow between the drain and source when a voltage is applied to the gate. Being a P-channel MOSFET, it is typically used in high-side switching where the load is connected to the drain and the source is connected to a positive supply voltage.
1. Gate (G): This is the control terminal that modulates the channel conductivity.
2. Drain (D): The terminal where the current enters the MOSFET.
3. Source (S): The terminal from which the current exits the MOSFET.
4. Tab (also Drain): The large tab is internally connected to the drain to help in heat dissipation.
Functionally, the DMP4065S-7 is used for switching applications. It allows current to flow between the drain and source when a voltage is applied to the gate. Being a P-channel MOSFET, it is typically used in high-side switching where the load is connected to the drain and the source is connected to a positive supply voltage.
Manufacturer
The DMP4065S-7 is a product manufactured by Diodes Incorporated. Diodes Incorporated is a global semiconductor manufacturer and supplier. The company specializes in the design, manufacture, and sale of discrete, logic, and analog semiconductors. Diodes Incorporated serves a wide range of markets, including consumer electronics, computing, communications, industrial, and automotive industries. The company is known for its extensive portfolio of products, which includes diodes, transistors, rectifiers, and other semiconductor components.
Application
The DMP4065S-7 is a MOSFET (metal-oxide-semiconductor field-effect transistor) commonly used in various electronic applications. Its primary application areas include:
1. Power Management: Used in power supply circuits for efficient voltage regulation in consumer electronics.
2. Switching Applications: Ideal for high-speed switching applications in DC-DC converters and power inverters.
3. Load Switching: Utilized in switching loads in automotive systems and industrial controls.
4. Battery Protection: Applied in battery management systems to prevent over-discharge and over-current conditions.
5. LED Drivers: Employed in driving LED circuits for consistent illumination.
These applications benefit from the transistor's low on-resistance and fast switching characteristics, contributing to energy efficiency and reliability.
1. Power Management: Used in power supply circuits for efficient voltage regulation in consumer electronics.
2. Switching Applications: Ideal for high-speed switching applications in DC-DC converters and power inverters.
3. Load Switching: Utilized in switching loads in automotive systems and industrial controls.
4. Battery Protection: Applied in battery management systems to prevent over-discharge and over-current conditions.
5. LED Drivers: Employed in driving LED circuits for consistent illumination.
These applications benefit from the transistor's low on-resistance and fast switching characteristics, contributing to energy efficiency and reliability.
Package
The DMP4065S-7 is packaged in a PowerDI®5060-8 package.
