画像は参考用です
DTA114YET1G
+BOMTRANS PREBIAS PNP 50V 100MA SC75
-
メーカーオンセミコンダクター社
-
メーカー品番 #DTA114YET1G
-
データシート DTA114YET1G DataSheet
-
パッケージ SOT-416
-
在庫状況28687
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Supplier | onsemi |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Transistor Type | PNP - Pre-Biased |
| Current - Collector(Ic)(Max) | 100 mA |
| Voltage - Collector Emitter Breakdown(Max) | 50 V |
| Resistor - Base(R1) | 10 kOhms |
| Resistor - Emitter Base(R2) | 47 kOhms |
| DC Current Gain(h FE)(Min) @ Ic Vce | 80 @ 5mA, 10V |
| Vce Saturation(Max) @ Ib Ic | 250mV @ 300µA, 10mA |
| Current - Collector Cutoff(Max) | 500nA |
| Power - Max | 200 mW |
| Mounting Type | Surface Mount |
概要
Description
"DTA114YET1G" appears to be a course code, likely for a specific subject or module at an educational institution. While I don't have specific information on this exact course, I can offer a general guide on how to approach understanding a course introduction:
1. Course Overview: The introduction typically provides a brief overview of what the course entails, including its main themes, objectives, and relevance.
2. Learning Outcomes: It outlines what students are expected to learn and achieve by the end of the course.
3. Key Topics: The introduction usually lists the primary topics or areas that will be covered throughout the course.
4. Instructional Methods: Information on how the course will be taught, such as lectures, seminars, or labs.
5. Assessment Criteria: Brief mention of how students will be evaluated, including exams, projects, or participation.
6. Prerequisites: Any required prior knowledge or courses needed before enrolling in this course.
For specific details about "DTA114YET1G," consulting the course syllabus, contacting the instructor, or checking the institution’s course catalog would be beneficial.
1. Course Overview: The introduction typically provides a brief overview of what the course entails, including its main themes, objectives, and relevance.
2. Learning Outcomes: It outlines what students are expected to learn and achieve by the end of the course.
3. Key Topics: The introduction usually lists the primary topics or areas that will be covered throughout the course.
4. Instructional Methods: Information on how the course will be taught, such as lectures, seminars, or labs.
5. Assessment Criteria: Brief mention of how students will be evaluated, including exams, projects, or participation.
6. Prerequisites: Any required prior knowledge or courses needed before enrolling in this course.
For specific details about "DTA114YET1G," consulting the course syllabus, contacting the instructor, or checking the institution’s course catalog would be beneficial.
Equivalent
The DTA114YET1G is a digital transistor with built-in resistors. Equivalent products from other manufacturers include:
1. KTC3875S-Y-RTK/P by KEC
2. MUN5111DW1T1G by ON Semiconductor
3. PDTC114ET by Nexperia
4. RN4919FE by Toshiba
Always verify the specifications and pin configurations, as they may vary slightly between manufacturers.
1. KTC3875S-Y-RTK/P by KEC
2. MUN5111DW1T1G by ON Semiconductor
3. PDTC114ET by Nexperia
4. RN4919FE by Toshiba
Always verify the specifications and pin configurations, as they may vary slightly between manufacturers.
Features
The DTA114YET1G is a digital transistor designed for use in switching applications. Here are its key features:
1. Type: It is an NPN digital transistor with a built-in resistor network.
2. Package: Available in a compact SOT-416 package, making it suitable for space-constrained applications.
3. Built-in Bias Resistors: The transistor includes a series resistor connected to the base, simplifying circuit design by eliminating the need for external bias resistors.
4. Voltage and Current: It typically supports a collector-emitter voltage (Vceo) of approximately 50V and a collector current (Ic) of around 100mA.
5. Resistor Values: The internal resistor configuration usually includes a base resistor (Rb) of about 10 kΩ.
6. Applications: Commonly used in digital circuits for switching and amplification applications, such as driving LEDs, relays, or interfacing microcontrollers with other devices.
7. Temperature Range: Operates effectively within a wide temperature range, typically from -55°C to +150°C.
These attributes make the DTA114YET1G a convenient choice for engineers looking to simplify circuit design in various electronic applications.
1. Type: It is an NPN digital transistor with a built-in resistor network.
2. Package: Available in a compact SOT-416 package, making it suitable for space-constrained applications.
3. Built-in Bias Resistors: The transistor includes a series resistor connected to the base, simplifying circuit design by eliminating the need for external bias resistors.
4. Voltage and Current: It typically supports a collector-emitter voltage (Vceo) of approximately 50V and a collector current (Ic) of around 100mA.
5. Resistor Values: The internal resistor configuration usually includes a base resistor (Rb) of about 10 kΩ.
6. Applications: Commonly used in digital circuits for switching and amplification applications, such as driving LEDs, relays, or interfacing microcontrollers with other devices.
7. Temperature Range: Operates effectively within a wide temperature range, typically from -55°C to +150°C.
These attributes make the DTA114YET1G a convenient choice for engineers looking to simplify circuit design in various electronic applications.
Pinout
The DTA114YET1G is a PNP bipolar junction transistor (BJT) with a built-in resistor network. It typically comes in a SOT-416 (SC-75) package, which has a 3-pin configuration. The functions of the pins are as follows:
1. Pin 1 (Base): This is the control pin for the transistor. In this device, there is a built-in resistor connected to the base which allows for current control without the need for an external base resistor.
2. Pin 2 (Emitter): This pin is the emitter terminal of the transistor and is typically connected to ground in most circuits.
3. Pin 3 (Collector): This is the output pin of the transistor where the controlled current flows through, usually connected to the load.
The DTA114YET1G is used in applications requiring small signal switching and amplification, benefiting from its resistor-equipped design which simplifies circuit design by reducing the number of external components needed.
1. Pin 1 (Base): This is the control pin for the transistor. In this device, there is a built-in resistor connected to the base which allows for current control without the need for an external base resistor.
2. Pin 2 (Emitter): This pin is the emitter terminal of the transistor and is typically connected to ground in most circuits.
3. Pin 3 (Collector): This is the output pin of the transistor where the controlled current flows through, usually connected to the load.
The DTA114YET1G is used in applications requiring small signal switching and amplification, benefiting from its resistor-equipped design which simplifies circuit design by reducing the number of external components needed.
Manufacturer
The DTA114YET1G is manufactured by ON Semiconductor, which is now known as onsemi. Onsemi is an American company that specializes in designing and manufacturing semiconductor components. It provides a wide range of products, including power and signal management, logic, discrete, and custom devices for various applications. These applications span multiple industries such as automotive, communications, computing, consumer electronics, industrial, LED lighting, medical, and military/aerospace. The company focuses on enabling energy-efficient innovations and solutions, which align with global trends towards sustainability and advanced technologies.
Application
The DTA114YET1G is a transistor commonly used in electronic circuits. Its primary application areas include:
1. Signal Amplification: Used in amplifying weak electrical signals in audio, radio, and other communication devices.
2. Switching Applications: Employed in switching applications, such as driving LEDs, relays, and other devices that require on-off control.
3. Voltage Regulation: Utilized in voltage regulation circuits to maintain a stable voltage level.
4. Motor Control: Acts as a switch or amplifier in motor control circuits for automation and robotics applications.
5. Consumer Electronics: Integrated into various consumer electronics including televisions, radios, and computers for different functional roles.
These applications make it versatile for use in both analog and digital circuits.
1. Signal Amplification: Used in amplifying weak electrical signals in audio, radio, and other communication devices.
2. Switching Applications: Employed in switching applications, such as driving LEDs, relays, and other devices that require on-off control.
3. Voltage Regulation: Utilized in voltage regulation circuits to maintain a stable voltage level.
4. Motor Control: Acts as a switch or amplifier in motor control circuits for automation and robotics applications.
5. Consumer Electronics: Integrated into various consumer electronics including televisions, radios, and computers for different functional roles.
These applications make it versatile for use in both analog and digital circuits.
Package
The DTA114YET1G is a PNP Bipolar Junction Transistor (BJT) with a built-in resistor. It is typically housed in a SOT-416 (SC-75) package, which is a small, surface-mount form factor suitable for compact electronic applications.
