画像は参考用です
EL7104CSZ
+BOMBUFFER/INVERTER BASED MOSFET DRI
-
メーカーインターシル
-
メーカー品番 #EL7104CSZ
-
データシート EL7104CSZ DataSheet
-
パッケージ SOIC-8
-
在庫状況5057
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Package | Bulk |
| ProductStatus | Active |
| DrivenConfiguration | Low-Side |
| ChannelType | Single |
| NumberofDrivers | 1 |
| GateType | N-Channel, P-Channel MOSFET |
| Voltage-Supply | 4.5V ~ 16V |
| LogicVoltage-VILVIH | 0.8V, 2.4V |
| Current-PeakOutput(SourceSink) | 4A, 4A |
| InputType | Non-Inverting |
| Rise/FallTime(Typ) | 7.5ns, 10ns |
| OperatingTemperature | -40°C ~ 125°C (TJ) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
概要
Description
For an accurate introduction, reviewing the course syllabus or the institution's catalog where this course is offered would be crucial. This documentation would provide details about the course objectives, topics covered, prerequisites, credits, and any specific learning outcomes expected from students. If you're looking for specific information, such as course content or requirements, consulting faculty, academic advisors, or official university resources would be the best approach.
Equivalent
1. TC4420/TC4429: Microchip Technology
2. MIC4420/MIC4429: Microchip Technology
3. UCC37321/UCC37322: Texas Instruments
4. IXDN404: IXYS (part of Littelfuse)
These alternatives offer similar performance characteristics, but always check the datasheet for pin compatibility and application suitability.
Features
1. High-Speed Performance: It offers fast switching times, which is crucial for high-frequency applications. Typical rise and fall times are often in the range of 10ns to 20ns.
2. High Current Drive Capability: The driver can source and sink currents up to 2A, enabling it to drive large capacitive loads effectively.
3. Wide Supply Voltage Range: It operates over a supply voltage range from 4.5V to 18V, providing flexibility in various applications.
4. Low Propagation Delay: The device exhibits low propagation delays, typically around 40ns, ensuring rapid response to input signals.
5. Low Output Impedance: This feature allows for minimal signal distortion and efficient power transfer.
6. Inverting and Non-Inverting Inputs: The EL7104CSZ includes both inverting and non-inverting inputs, offering versatility in circuit design.
7. Thermal Protection: Built-in thermal protection enhances reliability by preventing overheating.
These features make the EL7104CSZ suitable for applications in power MOSFET and IGBT gate driving, motor control, and power conversion.
Pinout
Here is a concise description of its pin functions:
1. VDD: Supply voltage pin.
2. IN: Input signal for controlling the output.
3. GND: Ground connection.
4. NC: No connection (not internally connected).
5. OUT: Output pin for driving the gate of a MOSFET.
6. NC: No connection (not internally connected).
7. NC: No connection (not internally connected).
8. VSS: Negative supply voltage (usually connected to GND in single supply applications).
The EL7104CSZ is typically used in applications requiring rapid switching of MOSFETs or IGBTs, such as power supplies, DC-DC converters, and motor control circuits. Its high-speed performance helps minimize switching losses and improve overall system efficiency.