画像は参考用です
LT1763CS8-3.3
+BOMLT1763 - IC VOLT REG FIXED 1 500
-
メーカーリニアテクノロジー
-
メーカー品番 #LT1763CS8-3.3
-
データシート LT1763CS8-3.3 DataSheet
-
パッケージ SOP-8
-
在庫状況6845
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Package | Bulk |
| ProductStatus | Active |
概要
Description
Key features include low noise (20µV RMS) without requiring an external bypass capacitor, low quiescent current (30µA), and excellent line and load transient response. The regulator also offers reverse battery protection, current limiting, and thermal shutdown for enhanced reliability and safety. The LT1763CS8-3.3 operates over a wide input voltage range from 3.8V to 20V and is housed in an 8-lead SOIC package, making it easy to integrate into various circuit designs. Its low noise and high performance make it ideal for powering sensitive analog and RF systems.
Equivalent
1. MIC5205-3.3YM - by Microchip Technology
2. LP2985AIM5-3.3 - by Texas Instruments
3. NCP1117LPST33T3G - by ON Semiconductor
4. AMS1117-3.3 - by Advanced Monolithic Systems
These are similar in terms of voltage regulation and dropout characteristics. Always check the datasheet to ensure compatibility with your application.
Features
1. Output Voltage: Fixed at 3.3V.
2. Input Voltage Range: Up to 20V.
3. Low Dropout Voltage: Typically 300mV at full load of 500mA.
4. Output Current: Capable of delivering up to 500mA.
5. Low Quiescent Current: Typically 30µA, beneficial for battery-powered devices.
6. Shutdown Mode: Reduces quiescent current to less than 1µA.
7. Stability: Stable with a low ESR (Equivalent Series Resistance) ceramic capacitors.
8. Protection Features: Includes reverse battery protection, current limiting, and thermal shutdown for enhanced reliability.
9. Package: Available in SO-8 package.
10. Operating Temperature Range: From -40°C to +125°C, suitable for a wide range of applications.
These features make the LT1763CS8-3.3 ideal for applications requiring efficient power regulation with minimal power loss and high reliability.
Pinout
1. IN: Input voltage supply.
2. GND: Ground connection.
3. SHDN: Shutdown pin to enable or disable the regulator.
4. OUT: Regulated output voltage.
5. NC (No Connect): Typically unused or not internally connected, can be left floating.
6. NC (No Connect): Similar to pin 5, often left floating.
7. BYP: Bypass pin for noise reduction, can connect a capacitor to improve performance.
8. NC (No Connect): Another no-connect pin, not used in typical applications.
This regulator features low quiescent current and is capable of delivering up to 500mA output with a dropout voltage as low as 300mV. It is suitable for applications where space is a concern and efficient power regulation is needed.